After many more runs on scenario 2, it is on par with atheros default. Sorry for the earlier hasty reporting. scenario 2: node 1 to node 2 802.11n Felix's Minstrel Avg Transfer= 95.5 Avg Bandwidth=80.11 802.11n Atheros Default Avg Transfer= 95.2 Avg Bandwidth=79.8 On Sun, Mar 7, 2010 at 9:20 PM, Duy Nguyen <dnlove@xxxxxxxxx> wrote: > Hi Felix, thanks for the awesome patch and great progress on the > 802.11n! I just tried out your patch version 3, and got the following > results. > > The results are an average of 10 different iperf runs, Throughputs are > in Mbits/sec > AP: dir-615 (settings: 802.11n mode only, Auto 20/40 Mhz). This AP > does not seem to allow me to set 40Mhz only > Node interfaces: D-Link DWA-556 Xtreme N PC > > > scenario 1: node 1 to node 2 > > node1-----wireless_link-----AP-----wireless_link-----node2 > > 802.11n Felix's Minstrel Avg Transfer= 38.6 Avg Bandwidth=32.3 > 802.11n Atheros Default Avg Transfer= 36.6 Avg Bandwidth=30.6 > > scenario 2: node 1 to node 2 > > node1-----wireless_link-----AP-----wired_link-----node2 > > 802.11n Felix's Minstrel Avg Transfer= 83.4 Avg Bandwidth=69.8 > 802.11n Atheros Default Avg Transfer= 95.2 Avg Bandwidth=79.8 > > Overall, the results look pretty good. I am much more interested in > results in scenario 1 but I am going to take a look at scenario 2 > again. Let me know if I can help you test any other scenarios. > > Duy > > > On Sun, Mar 7, 2010 at 10:45 AM, Felix Fietkau <nbd@xxxxxxxxxxx> wrote: >> Here's v3 of minstrel_ht. >> >> Changelog: >> >> v3: >> - Add two fixes by Christian Lamparter (division by zero, debugfs mcs >> rate display) >> - Improve throughput a bit more by spreading out slow rate sampling >> attempts over multiple sampling intervals >> >> v2: >> - Use accurate A-MPDU statistics from tx feedback >> - Rewrite the sampling algorithm to optimize for good A-MPDU lengths >> and faster throughput recovery >> - Implement .rate_update to handle changes in HT capabilities or >> channel bandwidth >> - Remove the private tx flags hack > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
