Search Linux Wireless

Re: Realtek rtl8188 support?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2010/3/7 Pavel Roskin <proski@xxxxxxx>:
> On Sat, 2010-03-06 at 19:07 +0100, Gábor Stefanik wrote:
>> Doesn't the RTL8192SU driver handle this chipset already?
>
> Yes, I was able to test it.  I followed instructions from this site:
> http://blog.xff.lt/2009/12/28/canyon-cnp-wf518n2-usb-wireless-linux/
>
> I added the ID
>
> diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
> index 6f424fe..bec729f 100644
> --- a/drivers/staging/rtl8192su/r8192U_core.c
> +++ b/drivers/staging/rtl8192su/r8192U_core.c
> @@ -130,6 +130,7 @@ static struct usb_device_id rtl8192_usb_id_tbl[] = {
>        {USB_DEVICE(0x06f8, 0xe031)},
>        //92SU
>        {USB_DEVICE(0x0bda, 0x8172)},
> +       {USB_DEVICE(0x0bda, 0x8171)},
>        {}
>  };
>
>
> Then I downloaded the driver from
> http://xff.lt/stuff/canyon-wifi/rtl8192se_linux_2.6.0013.1204.2009.tar.gz
>
> I took rtl8192sfw.bin from it and put it to /lib/firmware/RTL8192SU (not
> RTL8192SE as in the archive).
>
> I was able to load the driver, bring the interface up and scan.  I could
> not connect to an AP with CCMP for some reason:
>
> # wpa_supplicant -c /etc/wpa_supplicant/mike1.conf -i wlan29 -D wext
> ioctl[SIOCSIWPMKSA]: Invalid argument
> ioctl[SIOCSIWPMKSA]: Invalid argument
> CTRL-EVENT-SCAN-RESULTS
> CTRL-EVENT-SCAN-RESULTS
> Trying to associate with 00:25:9c:28:15:62 (SSID='mike1' freq=2437 MHz)
> ioctl[SIOCSIWFREQ]: Operation not supported
> Association request to the driver failed

Maybe with an actual RTL8192SU firmware it would work... just my 2 HUF.

>
> But I was able to connect to an unsecured AP:
>
> wlan29    802.11b/g/n  li  ESSID:"mike2"
>          Mode:Managed  Frequency=2.437 GHz  Access Point: 00:26:5A:C2:4C:3D
>          Bit Rate=130 Mb/s
>          Retry min limit:7   RTS thr:off   Fragment thr:off
>          Encryption key:off
>          Power Management:off
>          Link Quality=89/100  Signal level=-56 dBm  Noise level=-114 dBm
>          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
>
> I could also use the firmware called rtl8192sfw492.bin by renaming it to
> rtl8192sfw.bin.
>
> --
> Regards,
> Pavel Roskin
>



-- 
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux