Search Linux Wireless

[PATCH 2/3] ath5k: read eeprom IQ calibration values correctly for G mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



we read the IQ correction values (i_cal and q_cal) for G mode from a wrong
location (the same shifts as for A mode is applied which is incorrect). use
correct locations, matching the docs and HAL sources.

also we should write IQ correction only when we have that information in the
EEPROM, starting from version 4. also write it in the same way as we do in the
periodic recalibration (enable last), just to be sure.

Signed-off-by: Bruno Randolf <br1@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath5k/eeprom.c |    4 ++--
 drivers/net/wireless/ath/ath5k/reset.c  |   15 +++++++++------
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 6a3f4da..10b5226 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -429,8 +429,8 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
 			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
 
 		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+		ee->ee_i_cal[mode] = (val >> 5) & 0x3f;
+		ee->ee_q_cal[mode] = val & 0x1f;
 
 		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
 			AR5K_EEPROM_READ(o++, val);
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 6d9a1e8..e9e69dc 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -851,12 +851,15 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
 				AR5K_INIT_CYCRSSI_THR1);
 
-	/* I/Q correction
-	 * TODO: Per channel i/q infos ? */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		AR5K_PHY_IQ_CORR_ENABLE |
-		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		ee->ee_q_cal[ee_mode]);
+	/* I/Q correction (set enable bit last to match HAL sources) */
+	/* TODO: Per channel i/q infos ? */
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF,
+			    ee->ee_i_cal[ee_mode]);
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF,
+			    ee->ee_q_cal[ee_mode]);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE);
+	}
 
 	/* Heavy clipping -disable for now */
 	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux