When USE_OPENSSL=1 do not embed crypto data into binary, use the PUBKEY_DIR
variable just as it is when USE_GCRYPT=1 and just load certs from PUBKEY_DIR
for signature verification at runtime. Remove ssl support from
utils/key2pub.py.
This allows wireless-regdb to be built from source and upgraded independently
of crda and is _crucial_ for distributions who want to build their own
regulatory.bin.
This change does remove support for alternate runtime pubkey dir
/etc/wireless-regdb/pubkeys, but wireless-regdb does not currently install
custom pubkeys to /etc/wireless-regdb/pubkeys, and I couldn't care less
about that feature atm :)
When verification fails provide information about the PUBKEY_DIR variable.
Fix typo (s/make noverify/make all_noverify/).
Signed-off-by: Kel Modderman <kel@xxxxxxxxxx>
---
--- a/Makefile
+++ b/Makefile
@@ -16,13 +16,6 @@ UDEV_LEVEL=$(CRDA_UDEV_LEVEL)-
# a different location.
UDEV_RULE_DIR?=/lib/udev/rules.d/
-# If your distribution requires a custom pubkeys dir
-# you must update this variable to reflect where the
-# keys are put when building. For example you can run
-# with make PUBKEY_DIR=/usr/lib/crda/pubkeys
-PUBKEY_DIR?=pubkeys
-RUNTIME_PUBKEY_DIR?=/etc/wireless-regdb/pubkeys
-
CFLAGS += -Wall -g
all: all_noverify verify
@@ -30,17 +23,22 @@ all: all_noverify verify
all_noverify: crda intersect regdbdump
ifeq ($(USE_OPENSSL),1)
-CFLAGS += -DUSE_OPENSSL -DPUBKEY_DIR=\"$(RUNTIME_PUBKEY_DIR)\" `pkg-config --cflags openssl`
+PUBKEY_DIR?=$(PREFIX)/lib/crda/pubkeys
+CFLAGS += -DUSE_OPENSSL -DPUBKEY_DIR=\"$(PUBKEY_DIR)\" `pkg-config --cflags openssl`
LDLIBS += `pkg-config --libs openssl`
-reglib.o: keys-ssl.c
-
else
+PUBKEY_DIR?=pubkeys
CFLAGS += -DUSE_GCRYPT
LDLIBS += -lgcrypt
reglib.o: keys-gcrypt.c
+keys-gcrypt.c: utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem)
+ $(NQ) ' GEN ' $@
+ $(NQ) ' Trusted pubkeys:' $(wildcard $(PUBKEY_DIR)/*.pem)
+ $(Q)./utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem) $@
+
endif
MKDIR ?= mkdir -p
INSTALL ?= install
@@ -82,15 +80,10 @@ $(REG_BIN):
$(NQ) $(REG_GIT)
$(NQ)
$(NQ) "Once cloned (no need to build) cp regulatory.bin to $(REG_BIN)"
- $(NQ) "Use \"make noverify\" to disable verification"
+ $(NQ) "Use \"make all_noverify\" to disable verification"
$(NQ)
$(Q) exit 1
-keys-%.c: utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem)
- $(NQ) ' GEN ' $@
- $(NQ) ' Trusted pubkeys:' $(wildcard $(PUBKEY_DIR)/*.pem)
- $(Q)./utils/key2pub.py --$* $(wildcard $(PUBKEY_DIR)/*.pem) $@
-
%.o: %.c regdb.h
$(NQ) ' CC ' $@
$(Q)$(CC) -c $(CPPFLAGS) $(CFLAGS) -o $@ $<
@@ -109,7 +102,15 @@ intersect: reglib.o intersect.o print-re
verify: $(REG_BIN) regdbdump
$(NQ) ' CHK $(REG_BIN)'
- $(Q)./regdbdump $(REG_BIN) >/dev/null
+ @if ! ./regdbdump $(REG_BIN) >/dev/null; then \
+ echo; \
+ echo "If your distribution requires a custom pubkeys dir you must set"; \
+ echo "PUBKEY_DIR to path where the keys are installed by wireless-regdb."; \
+ echo "For example:"; \
+ echo " make PUBKEY_DIR=/lib/crda/pubkeys"; \
+ echo; \
+ exit 1; \
+ fi
%.gz: %
@$(NQ) ' GZIP' $<
--- a/reglib.c
+++ b/reglib.c
@@ -18,10 +18,6 @@
#include "reglib.h"
-#ifdef USE_OPENSSL
-#include "keys-ssl.c"
-#endif
-
#ifdef USE_GCRYPT
#include "keys-gcrypt.c"
#endif
@@ -49,7 +45,6 @@ int crda_verify_db_signature(__u8 *db, i
#ifdef USE_OPENSSL
RSA *rsa;
__u8 hash[SHA_DIGEST_LENGTH];
- unsigned int i;
int ok = 0;
DIR *pubkey_dir;
struct dirent *nextfile;
@@ -61,24 +56,7 @@ int crda_verify_db_signature(__u8 *db, i
goto out;
}
- for (i = 0; (i < sizeof(keys)/sizeof(keys[0])) && (!ok); i++) {
- rsa = RSA_new();
- if (!rsa) {
- fprintf(stderr, "Failed to create RSA key.\n");
- goto out;
- }
-
- rsa->e = &keys[i].e;
- rsa->n = &keys[i].n;
-
- ok = RSA_verify(NID_sha1, hash, SHA_DIGEST_LENGTH,
- db + dblen, siglen, rsa) == 1;
-
- rsa->e = NULL;
- rsa->n = NULL;
- RSA_free(rsa);
- }
- if (!ok && (pubkey_dir = opendir(PUBKEY_DIR))) {
+ if ((pubkey_dir = opendir(PUBKEY_DIR))) {
while (!ok && (nextfile = readdir(pubkey_dir))) {
snprintf(filename, PATH_MAX, "%s/%s", PUBKEY_DIR,
nextfile->d_name);
--- a/utils/key2pub.py
+++ b/utils/key2pub.py
@@ -9,81 +9,6 @@ except ImportError, e:
sys.stderr.write('On Debian GNU/Linux the package is called "python-m2crypto".\n')
sys.exit(1)
-def print_ssl_64(output, name, val):
- while val[0] == '\0':
- val = val[1:]
- while len(val) % 8:
- val = '\0' + val
- vnew = []
- while len(val):
- vnew.append((val[0], val[1], val[2], val[3], val[4], val[5], val[6], val[7]))
- val = val[8:]
- vnew.reverse()
- output.write('static BN_ULONG %s[%d] = {\n' % (name, len(vnew)))
- idx = 0
- for v1, v2, v3, v4, v5, v6, v7, v8 in vnew:
- if not idx:
- output.write('\t')
- output.write('0x%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x, ' % (ord(v1), ord(v2), ord(v3), ord(v4), ord(v5), ord(v6), ord(v7), ord(v8)))
- idx += 1
- if idx == 2:
- idx = 0
- output.write('\n')
- if idx:
- output.write('\n')
- output.write('};\n\n')
-
-def print_ssl_32(output, name, val):
- while val[0] == '\0':
- val = val[1:]
- while len(val) % 4:
- val = '\0' + val
- vnew = []
- while len(val):
- vnew.append((val[0], val[1], val[2], val[3], ))
- val = val[4:]
- vnew.reverse()
- output.write('static BN_ULONG %s[%d] = {\n' % (name, len(vnew)))
- idx = 0
- for v1, v2, v3, v4 in vnew:
- if not idx:
- output.write('\t')
- output.write('0x%.2x%.2x%.2x%.2x, ' % (ord(v1), ord(v2), ord(v3), ord(v4)))
- idx += 1
- if idx == 4:
- idx = 0
- output.write('\n')
- if idx:
- output.write('\n')
- output.write('};\n\n')
-
-def print_ssl(output, name, val):
- import struct
- if len(struct.pack('@L', 0)) == 8:
- return print_ssl_64(output, name, val)
- else:
- return print_ssl_32(output, name, val)
-
-def print_ssl_keys(output, n):
- output.write(r'''
-struct pubkey {
- struct bignum_st e, n;
-};
-
-#define KEY(data) { \
- .d = data, \
- .top = sizeof(data)/sizeof(data[0]), \
-}
-
-#define KEYS(e,n) { KEY(e), KEY(n), }
-
-static struct pubkey keys[] = {
-''')
- for n in xrange(n + 1):
- output.write(' KEYS(e_%d, n_%d),\n' % (n, n))
- output.write('};\n')
- pass
-
def print_gcrypt(output, name, val):
while val[0] == '\0':
val = val[1:]
@@ -118,24 +43,10 @@ static const struct key_params keys[] =
for n in xrange(n + 1):
output.write(' KEYS(e_%d, n_%d),\n' % (n, n))
output.write('};\n')
-
-
-modes = {
- '--ssl': (print_ssl, print_ssl_keys),
- '--gcrypt': (print_gcrypt, print_gcrypt_keys),
-}
-try:
- mode = sys.argv[1]
- files = sys.argv[2:-1]
- outfile = sys.argv[-1]
-except IndexError:
- mode = None
-
-if not mode in modes:
- print 'Usage: %s [%s] input-file... output-file' % (sys.argv[0], '|'.join(modes.keys()))
- sys.exit(2)
+files = sys.argv[1:-1]
+outfile = sys.argv[-1]
output = open(outfile, 'w')
# load key
@@ -146,8 +57,8 @@ for f in files:
except RSA.RSAError:
key = RSA.load_key(f)
- modes[mode][0](output, 'e_%d' % idx, key.e[4:])
- modes[mode][0](output, 'n_%d' % idx, key.n[4:])
+ print_gcrypt(output, 'e_%d' % idx, key.e[4:])
+ print_gcrypt(output, 'n_%d' % idx, key.n[4:])
idx += 1
-modes[mode][1](output, idx - 1)
+print_gcrypt_keys(output, idx - 1)
---
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
