On Sun, Feb 28, 2010 at 11:58:10PM +0100, Bjarke Istrup Pedersen wrote: > There is a problem when trying to create a bridge containing a normal > NIC and a wireless NIC, and using hostapd. > > The problem is, that it is not possible to create a bridge containing > a wireless NIC, if it hasn't been setup first. > > Does anyone have a solution for this? How about first creating the br0, then starting hostapd, and finally adding wlan0 into br0? > (The commit that introduced this problem is > ad4bb6f8883a13bb0f65b194dae36c62a02ac779 , reverting it solves the > problem). I don't know whether I would call that a solution, but well.. > For more info, please have a look at this bug report: > http://bugs.gentoo.org/show_bug.cgi?id=298824 I'm not sure whether I understood the description correctly, but this sounds like a limitation in the way the network setup is done. Forcing br0 to be created with wlan0 before wlan0 has been configured is not going to work. I would consider removing wlan0 from the static configuration of br0 and just creating br0 with eth0 with the setup scripts and allowing hostapd to add wlan0 into br0 once the interface has been configured properly (support for this was added in hostapd 0.7.1). -- Jouni Malinen PGP id EFC895FA -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html