-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
- -------- Original Message --------
Subject: Re: ipw2100 crash with latest git
From: Zhu Yi <yi.zhu@xxxxxxxxx>
To: legolas558 <legolas558@xxxxxxxxxxxxxxxxxxxxx>
Date: Thu Feb 25 2010 01:52:33 GMT+0100 (CET)
> On Thu, 2010-02-25 at 05:35 +0800, Daniele C. wrote:
>> - --->8-----
>> Feb 24 21:53:20 fester kernel: ipw2100: exit - failed to send
>> CARD_DISABLE command
>> Feb 24 21:53:20 fester kernel: ipw2100: exit - failed to send
>> CARD_DISABLE command
>> Feb 24 21:54:16 fester kernel: ipw2100: Fatal interrupt. Scheduling
>> firmware restart.
>> Feb 24 21:56:47 fester kernel: ipw2100: exit - failed to send
>> CARD_DISABLE command
>> Feb 24 21:58:51 fester kernel: ipw2100: exit - failed to send
>> CARD_DISABLE command
>> Feb 24 22:07:11 fester kernel: ipw2100: exit - failed to send
>> CARD_DISABLE command
>> Feb 24 22:09:57 fester kernel: ipw2100: Fatal interrupt. Scheduling
>> firmware restart.
>> Feb 24 22:11:09 fester acpid: client 3208[0:100] has disconnected
>> Feb 24 22:11:09 fester acpid: client connected from 3208[0:100]
>> Feb 24 22:11:09 fester acpid: 1 client rule loaded
>> Feb 24 22:28:49 fester kernel: ipw2100: Fatal interrupt. Scheduling
>> firmware restart.
>> - --->8-----
>
> This is a firmware error. Does the driver recover itself later?
>
I cannot scientifically say yes, but by memory I'd say that it does after a full unload/reload of ipw2100 module. I will of course test this if it happens again.
Meanwhile I got the crash also with 2.6.32 (attached), so it's definitively a not yet fixed bug and not something due to my custom patches.
Triggering conditions are basically "hammering" the device to change APs without any ipw2100 module reload in the process.
P.S. I think the acpid event can be ignored because I disconnected an USB device at that time (totally unrelated).
Thanks,
- --
Daniele C.
> Thanks,
> -yi
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJLheUXAAoJEON28As9epPAZfUH/36MTt6fp5xQhqmRbs6ODjeO
RQrl98cHP/c21Xv9E8P29r++gVkEHXtBiwszENFZ3R0zpVcadB0Z6RXfYckAuahr
bCEwk6izckcTnGPSOXkqhunyo9IZD5VHJThRI3Q8Jbl5fo3/k1+tY25okMDs+qI1
X94w9CdcxltS06iiIiG2VAwrqxoAVePuA2u9mXx5fEoHwZLSyEQ/uEyju90peEut
l5wYuRguyfR/sHhv2bDAtpvqt60+mr1vV/XTufjKymg8RAvjLIiDAiJhCQ6Ldk4U
Ls+HGF3cxxKq6kSi3qMoy7HDVOzKHIwKZB+MFMHC6RPuDHcCk8uonYWTgoEcqy0=
=te4d
-----END PGP SIGNATURE-----
Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Feb 9 14:46:08 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
BIOS-e820: 000000001f6e0000 - 000000001f6eb000 (ACPI data)
BIOS-e820: 000000001f6eb000 - 000000001f700000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1f6e0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 01FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000ce000 - 00000000000d0000 (reserved)
modified: 00000000000d8000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000001f6e0000 (usable)
modified: 000000001f6e0000 - 000000001f6eb000 (ACPI data)
modified: 000000001f6eb000 - 000000001f700000 (ACPI NVS)
modified: 000000001f700000 - 0000000020000000 (reserved)
modified: 00000000fec10000 - 00000000fec20000 (reserved)
modified: 00000000ff800000 - 00000000ffc00000 (reserved)
modified: 00000000fffffc00 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001f6e0000
0000000000 - 0000400000 page 4k
0000400000 - 001f400000 page 2M
001f400000 - 001f6e0000 page 4k
kernel direct mapping tables up to 1f6e0000 @ 10000-15000
RAMDISK: 1f578000 - 1f6cf8e6
ACPI: RSDP 000f6700 00014 (v00 PTLTD )
ACPI: RSDT 1f6e6557 00030 (v01 PTLTD Montara 06040000 LTP 00000000)
ACPI: FACP 1f6eaed2 00074 (v01 INTEL MONTARAG 06040000 PTL 00000050)
ACPI: DSDT 1f6e6a68 0446A (v01 INTEL MONTARAG 06040000 MSFT 0100000E)
ACPI: FACS 1f6fbfc0 00040
ACPI: BOOT 1f6eafd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 1f6e6587 004D9 (v01 INTEL GV3Ref 00001001 MSFT 0100000E)
0MB HIGHMEM available.
502MB LOWMEM available.
mapped low ram: 0 - 1f6e0000
low ram: 0 - 1f6e0000
node 0 low ram: 00000000 - 1f6e0000
node 0 bootmap 00011000 - 00014edc
(9 early reservations) ==> bootmem [0000000000 - 001f6e0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000152f024] TEXT DATA BSS ==> [0001000000 - 000152f024]
#4 [001f578000 - 001f6cf8e6] RAMDISK ==> [001f578000 - 001f6cf8e6]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#6 [0001530000 - 000153618c] BRK ==> [0001530000 - 000153618c]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001f6e0
HighMem 0x0001f6e0 -> 0x0001f6e0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001f6e0
On node 0 totalpages: 128623
free_area_init_node: node 0, pgdat c13dbe40, node_mem_map c1538200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 974 pages used for memmap
Normal zone: 123666 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:dec10000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34680 r0 d22664 u4194304
pcpu-alloc: s34680 r0 d22664 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127617
Kernel command line: resume=/dev/disk/by-label/SWAP1 root=/dev/disk/by-label/LINUX ro lapic=yes hpet=force clocksource=hpet i8042.nomux=1 nomodeset nofb vga=0xF06
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 502952k/514944k available (2796k kernel code, 11240k reserved, 1186k data, 412k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdfee0000 - 0xff7fe000 ( 505 MB)
lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
.init : 0xc13e4000 - 0xc144b000 ( 412 kB)
.data : 0xc12bb14a - 0xc13e39c8 (1186 kB)
.text : 0xc1000000 - 0xc12bb14a (2796 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x34
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1599.487 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.26 BogoMIPS (lpj=5331623)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0c00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3200.26 BogoMIPS).
CPU0 attaching NULL sched-domain.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd6c4, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:02:03.0: reg 10 32bit mmio: [0xe0202000-0xe0202fff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:03.0: PME# disabled
pci 0000:02:05.0: reg 10 32bit mmio: [0xe0200000-0xe0201fff]
pci 0000:02:05.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:06.0: reg 10 32bit mmio: [0xe0203000-0xe0203fff]
pci 0000:02:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:02:09.0: supports D1 D2
pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:04: ioport range 0x600-0x60f has been reserved
system 00:04: ioport range 0x700-0x70f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
pci 0000:02:09.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:09.0: IO window: 0x003000-0x0030ff
pci 0000:02:09.0: IO window: 0x003400-0x0034ff
pci 0000:02:09.0: PREFETCH window: 0x20000000-0x23ffffff
pci 0000:02:09.0: MEM window: 0x28000000-0x2bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x3000-0x3fff
pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x25ffffff
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:02:09.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
pci_bus 0000:02: resource 2 pref mem [0x20000000-0x25ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x30ff]
pci_bus 0000:03: resource 1 io: [0x3400-0x34ff]
pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
pci_bus 0000:03: resource 3 mem: [0x28000000-0x2bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 1374k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1267044221.120:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 985
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Checking image partition /dev/disk/by-label/SWAP1
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817
ide1: BM-DMA at 0x1818-0x181f
Probing IDE interface ide0...
hda: WDC WD1600BEVE-00UYT0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 3.00 loaded.
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
hda:
ide-cd driver 5.00
hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
PM: Starting manual resume from disk
PM: Resume from partition 3:3
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
udev: starting version 151
ACPI: AC Adapter [AC] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRS] (48 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THRC] (45 C)
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: Battery Slot [BAT0] (battery absent)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLP2]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_intel8x0m: `false' invalid for parameter `enable'
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
intel_rng: FWH not detected
uhci_hcd: USB Universal Host Controller Interface driver
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
iTCO_vendor_support: vendor-support=0
NET: Registered protocol family 23
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
firewire_ohci 0000:02:03.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
mmc0: W83L51xD id 7112 at 0x820 irq 6 FIFO PnP
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:08: disabled
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
firewire_ohci: Added fw-ohci device 0000:02:03.0, OHCI version 1.0
yenta_cardbus 0000:02:09.0: CardBus bridge found [17c0:3003]
yenta_cardbus 0000:02:09.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:09.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:09.0: TI: mfunc 0x01001002, devctl 0x64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:02.0: setting latency timer to 64
[drm:drm_fill_in_dev] *ERROR* Cannot initialize the agpgart module.
DRM: Fill_in_dev failed.
pci 0000:00:02.0: PCI INT A disabled
yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0098, PCI irq 10
yenta_cardbus 0000:02:09.0: Socket status: 30000007
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x25ffffff
intel8x0_measure_ac97_clock: measured 52662 usecs (2538 samples)
intel8x0: clocking to 48000
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
b44 0000:02:05.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
firewire_core: created device fw0: GUID 03e40a009c002042, S400
ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0a:e4:21:a0:f0
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x840-0x847
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on hda6, internal journal
REISERFS (device hda7): found reiserfs format "3.6" with standard journal
REISERFS (device hda7): using ordered data mode
REISERFS (device hda7): journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device hda7): checking transaction log (hda7)
REISERFS (device hda7): Using r5 hash to sort names
fuse init (API version 7.13)
Adding 538168k swap on /dev/hda3. Priority:-1 extents:1 across:538168k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ttyS1: LSR safety check engaged!
hdc: UDMA/33 mode selected
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ipw2100 0000:02:06.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
ADDRCONF(NETDEV_UP): eth1: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
lib80211_crypt: registered algorithm 'CCMP'
padlock: VIA PadLock not detected.
eth1: no IPv6 routers present
loop: module loaded
REISERFS (device loop0): found reiserfs format "3.6" with standard journal
REISERFS (device loop0): using ordered data mode
REISERFS (device loop0): journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device loop0): checking transaction log (loop0)
REISERFS (device loop0): Using r5 hash to sort names
ipw2100: exit - failed to send CARD_DISABLE command
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x1ec/0x200()
Hardware name: Pro 7000X
NETDEV WATCHDOG: eth1 (ipw2100): transmit queue 0 timed out
Modules linked in: loop aes_i586 aes_generic lib80211_crypt_ccmp xt_iprange xt_tcpudp iptable_filter ip_tables x_tables ipw2100 libipw lib80211 ipv6 nls_cp850 fuse reiserfs vfat fat nls_cp437 snd_seq_dummy b44 snd_seq_oss joydev snd_seq_midi_event ssb i915 snd_seq pcmcia yenta_socket firewire_ohci iTCO_wdt snd_seq_device mii wbsd rsrc_nonstatic drm_kms_helper firewire_core crc_itu_t iTCO_vendor_support irda crc_ccitt mmc_core pcmcia_core drm i2c_algo_bit i2c_i801 i2c_core psmouse intel_agp uhci_hcd agpgart ehci_hcd video snd_intel8x0 snd_pcm_oss shpchp serio_raw container snd_ac97_codec snd_mixer_oss button ac97_bus pci_hotplug output usbcore evdev battery processor ac thermal snd_pcm snd_timer snd soundcore snd_page_alloc rtc_cmos rtc_core rtc_lib ext3 jbd mbcache ide_cd_mod cdrom ide_gd_mod pata_acpi ata_generic ata_piix libata scsi_mod ide_pci_generic piix ide_core
Pid: 0, comm: swapper Not tainted 2.6.32-ARCH #1
Call Trace:
[<c104042e>] ? warn_slowpath_common+0x6e/0xb0
[<c123efbc>] ? dev_watchdog+0x1ec/0x200
[<c10404bb>] ? warn_slowpath_fmt+0x2b/0x30
[<c123efbc>] ? dev_watchdog+0x1ec/0x200
[<c102cd0c>] ? enqueue_task+0x3c/0xa0
[<c102cd8d>] ? activate_task+0x1d/0x30
[<c10379d5>] ? try_to_wake_up+0x2f5/0x350
[<c123edd0>] ? dev_watchdog+0x0/0x200
[<c104e625>] ? run_timer_softirq+0x135/0x320
[<c1046d0f>] ? __do_softirq+0x8f/0x200
[<c1006999>] ? timer_interrupt+0x39/0x40
[<c1088f25>] ? handle_IRQ_event+0x45/0x190
[<c1046ebd>] ? do_softirq+0x3d/0x40
[<c1047095>] ? irq_exit+0x65/0x70
[<c1005a60>] ? do_IRQ+0x50/0xc0
[<c1009d78>] ? sched_clock+0x8/0x10
[<c10040d0>] ? common_interrupt+0x30/0x38
[<e01b615f>] ? acpi_idle_enter_bm+0x297/0x2c8 [processor]
[<c1214632>] ? cpuidle_idle_call+0x72/0x120
[<c1002904>] ? cpu_idle+0x94/0xe0
[<c13e485d>] ? start_kernel+0x335/0x33a
[<c13e4366>] ? unknown_bootoption+0x0/0x190
---[ end trace 6dc495fc2d796e47 ]---
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: Fatal interrupt. Scheduling firmware restart.
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100: exit - failed to send CARD_DISABLE command
ipw2100 0000:02:06.0: PCI INT A disabled
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2100 0000:02:06.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ipw2100 0000:02:06.0: PCI INT A disabled
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2100 0000:02:06.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ipw2100: Error disabling radio -5
ipw2100: eth1: Power down command failed: Error -5
ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
ipw2100 0000:02:06.0: PCI INT A disabled
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: G W 2.6.32-ARCH #1
Call Trace:
[<c108a2b4>] ? __report_bad_irq+0x24/0x90
[<c108a470>] ? note_interrupt+0x150/0x190
[<c1007b9a>] ? mask_and_ack_8259A+0x1a/0x100
[<c108acc3>] ? handle_level_irq+0xd3/0x100
[<c10064e5>] ? handle_irq+0x15/0x30
[<c1005a57>] ? do_IRQ+0x47/0xc0
[<c1047061>] ? irq_exit+0x31/0x70
[<c101be04>] ? smp_apic_timer_interrupt+0x54/0x90
[<c10040d0>] ? common_interrupt+0x30/0x38
[<c1088ef5>] ? handle_IRQ_event+0x15/0x190
[<c105e7db>] ? hrtimer_interrupt+0x1ab/0x240
[<c1007b9a>] ? mask_and_ack_8259A+0x1a/0x100
[<c108ac64>] ? handle_level_irq+0x74/0x100
[<c10064e5>] ? handle_irq+0x15/0x30
[<c1005a57>] ? do_IRQ+0x47/0xc0
[<c1047061>] ? irq_exit+0x31/0x70
[<c101be04>] ? smp_apic_timer_interrupt+0x54/0x90
[<c10040d0>] ? common_interrupt+0x30/0x38
[<c1046cc5>] ? __do_softirq+0x45/0x200
[<c1088f25>] ? handle_IRQ_event+0x45/0x190
[<c1007b9a>] ? mask_and_ack_8259A+0x1a/0x100
[<c1046ebd>] ? do_softirq+0x3d/0x40
[<c1047095>] ? irq_exit+0x65/0x70
[<c1005a60>] ? do_IRQ+0x50/0xc0
[<c1009d78>] ? sched_clock+0x8/0x10
[<c10040d0>] ? common_interrupt+0x30/0x38
[<e01b615f>] ? acpi_idle_enter_bm+0x297/0x2c8 [processor]
[<c1214632>] ? cpuidle_idle_call+0x72/0x120
[<c1002904>] ? cpu_idle+0x94/0xe0
[<c13e485d>] ? start_kernel+0x335/0x33a
[<c13e4366>] ? unknown_bootoption+0x0/0x190
handlers:
[<e037f320>] (snd_intel8x0_interrupt+0x0/0x250 [snd_intel8x0])
[<e064ae70>] (irq_handler+0x0/0x4e0 [firewire_ohci])
[<e0666910>] (yenta_interrupt+0x0/0xc0 [yenta_socket])
Disabling IRQ #10
