Search Linux Wireless

Re: problem with WG511v1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 23, 2010 at 06:32:30PM +0100, Jens Westemeier wrote:

> modprobe p54pci gives (in /var/log/messages):
> 
> p54pci 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> p54pci 0000:05:01.0: firmware: requesting isl3886pci
> phy2: p54 detected a LM86 firmware
> p54: rx_mtu reduced from 3240 to 2376
> phy2: FW rev 2.17.2.0 - Softmac protocol 7.6
> phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
> phy2: device does not respond!
> p54pci 0000:05:01.0: PCI INT A disabled
> p54pci: probe of 0000:05:01.0 failed with error -16

I'm guessing this is the EBUSY return from p54_download_eeprom.
I'm not immediately familiar enough with the driver to know what that
means, but perhaps your device is showing its age?  Hopefully a P54
person can provide a more concrete suggestion.

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@xxxxxxxxxxxxx			might be all we have.  Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux