Hi linux-wireless list, hi hostap list! I am trying to get a 802.11n-network as test running. I want to test the highest throughput, that I can do with this setup to see, what could be possible for me. My setup is a Senao EMP-7605 card and ath9k with a 2.6.32.8-kernel. Thanks to Jouni Malinen, I am now using the latest snapshot of hostapd-0.6.10. If I start hostapd, my Lenovo Thinkpad(I think, there is an Intel card running inside there) can find the network, that I established with ath9k, but another Senao EMP-7905 with the same setup as mentioned above won't find the wireless network at all, even during a scan. If I do an iperf between the Lenovo and the board, that runs the AP with hostapd, I get throughput rates of about 6 Mbit/s. iwconfig on the Lenovo shows the bitrate set to "0" - meaning auto. I cannot find valuable documentation about setting up a wireless-link with ath9k using 802.11n-capabilities. Is there any hint, that someone could give me or a webpage that I could be pointed to? I just want to do some speed-tests, but even the "ht_kapab"-field of hostapd leaves me without any knowledge, what to put in there... Any help would be appreciated! Very kind regards, Dennis Borgmann -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html