The same code is also used for probe request generation
Signed-off-by: Benoit Papillault <benoit.papillault@xxxxxxx>
---
net/mac80211/ibss.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++---
net/mac80211/util.c | 23 +++++++------
2 files changed, 93 insertions(+), 16 deletions(-)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index f3e9424..423befa 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -96,6 +96,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
local->oper_channel = chan;
+ /* FIXME : we can have HT channels here */
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
@@ -111,7 +112,10 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
*pos++ = basic | (u8) (rate / 5);
}
- /* Build IBSS probe response */
+ /*
+ * Build IBSS probe response template (also used for beacon template
+ * in ieee80211_beacon_get_tim())
+ */
mgmt = (void *) skb_put(skb, 24 + sizeof(mgmt->u.beacon));
memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
@@ -158,6 +162,64 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memcpy(pos, &supp_rates[8], rates);
}
+ if (sband->ht_cap.ht_supported) {
+ u16 cap = sband->ht_cap.cap;
+ struct ieee80211_ht_cap ht_cap;
+ struct ieee80211_ht_info ht_info;
+
+ if (ieee80211_disable_40mhz_24ghz &&
+ sband->band == IEEE80211_BAND_2GHZ) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+
+ ht_cap.cap_info = cpu_to_le16(cap);
+ ht_cap.ampdu_params_info = sband->ht_cap.ampdu_factor |
+ (sband->ht_cap.ampdu_density <<
+ IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
+ ht_cap.mcs = sband->ht_cap.mcs;
+ ht_cap.extended_ht_cap_info = cpu_to_le16(0);
+ ht_cap.tx_BF_cap_info = cpu_to_le32(0);
+ ht_cap.antenna_selection_info = 0;
+
+ /* HT Capabilities element */
+ pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
+ *pos++ = WLAN_EID_HT_CAPABILITY;
+ *pos++ = sizeof(struct ieee80211_ht_cap);
+ memcpy(pos, &ht_cap, sizeof(struct ieee80211_ht_cap));
+
+ ht_info.control_chan =
+ ieee80211_frequency_to_channel(chan->center_freq);
+ ht_info.ht_param = 0;
+ /* FIXME : local->oper_channel_type is set to a fixed value */
+ switch (local->oper_channel_type) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
+ ht_info.ht_param |= IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ break;
+ case NL80211_CHAN_HT40MINUS:
+ ht_info.ht_param |= IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ break;
+ case NL80211_CHAN_HT40PLUS:
+ ht_info.ht_param |= IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+ break;
+ }
+ if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+ ht_info.ht_param |= IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
+ ht_info.operation_mode = cpu_to_le16(0);
+ ht_info.stbc_param = cpu_to_le16(0);
+ /* It seems that Basic MCS set and Supported MCS set
+ are identical for the first 10 bytes */
+ memset(&ht_info.basic_set, 0, 16);
+ memcpy(&ht_info.basic_set, &ht_cap.mcs, 10);
+
+ /* HT Information element */
+ pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_info));
+ *pos++ = WLAN_EID_HT_INFORMATION;
+ *pos++ = sizeof(struct ieee80211_ht_info);
+ memcpy(pos, &ht_info, sizeof(struct ieee80211_ht_info));
+ }
+
if (ifibss->ie_len)
memcpy(skb_put(skb, ifibss->ie_len),
ifibss->ie, ifibss->ie_len);
@@ -903,11 +965,25 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
sdata->u.ibss.ie_len = params->ie_len;
}
+ /*
+ * Allocate IBSS probe response template (see
+ * __ieee80211_sta_join_ibss for the needed size). According to IEEE
+ * 802.11-2007 10.4.4.2, there is only 20 possibles values. We
+ * support up IEEE80211_MAX_SUPP_RATES (currently 32) : so 8 for
+ * Supported Rates and IEEE80211_MAX_SUPP_RATES-8 for Extended
+ * Supported Rates
+ */
+
skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom +
- 36 /* bitrates */ +
- 34 /* SSID */ +
- 3 /* DS params */ +
- 4 /* IBSS params */ +
+ sizeof(struct ieee80211_hdr_3addr) +
+ 12 /* struct ieee80211_mgmt.u.beacon */ +
+ 2 + IEEE80211_MAX_SSID_LEN /* max SSID */ +
+ 2 + 8 /* max Supported Rates */ +
+ 3 /* max DS params */ +
+ 4 /* IBSS params */ +
+ 2 + (IEEE80211_MAX_SUPP_RATES-8) /* max Ext Rates */ +
+ 2 + sizeof(struct ieee80211_ht_cap) +
+ 2 + sizeof(struct ieee80211_ht_info) +
params->ie_len);
if (!skb)
return -ENOMEM;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index c453226..591cc71 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -958,7 +958,7 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
if (sband->ht_cap.ht_supported) {
u16 cap = sband->ht_cap.cap;
- __le16 tmp;
+ struct ieee80211_ht_cap ht_cap;
if (ieee80211_disable_40mhz_24ghz &&
sband->band == IEEE80211_BAND_2GHZ) {
@@ -966,18 +966,19 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
cap &= ~IEEE80211_HT_CAP_SGI_40;
}
+ ht_cap.cap_info = cpu_to_le16(cap);
+ ht_cap.ampdu_params_info = sband->ht_cap.ampdu_factor |
+ (sband->ht_cap.ampdu_density <<
+ IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
+ ht_cap.mcs = sband->ht_cap.mcs;
+ ht_cap.extended_ht_cap_info = cpu_to_le16(0);
+ ht_cap.tx_BF_cap_info = cpu_to_le32(0);
+ ht_cap.antenna_selection_info = 0;
+
*pos++ = WLAN_EID_HT_CAPABILITY;
*pos++ = sizeof(struct ieee80211_ht_cap);
- memset(pos, 0, sizeof(struct ieee80211_ht_cap));
- tmp = cpu_to_le16(cap);
- memcpy(pos, &tmp, sizeof(u16));
- pos += sizeof(u16);
- *pos++ = sband->ht_cap.ampdu_factor |
- (sband->ht_cap.ampdu_density <<
- IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
- memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
- pos += sizeof(sband->ht_cap.mcs);
- pos += 2 + 4 + 1; /* ext info, BF cap, antsel */
+ memcpy(pos, &ht_cap, sizeof(struct ieee80211_ht_cap));
+ pos += sizeof(struct ieee80211_ht_cap);
}
/*
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
