On Mon, Feb 08, 2010 at 10:36:09PM -0800, Zhang Yanfei-B21500 wrote: > Hi Guys > > Thanks a lot... Good news. Do you have porting to 2.6.25 > successfully with good performace also ? It should be OK for the release without the multiqueue backported. Multiqueue was added back on the 2.6.32.4 release so 2.6.32.3 should be the last release without it. That I believe was tested to work well with ath9k. After that I have not received any feedback with respect to the multiqueue backport. Feedback on that is appreciated. > I am going to porting it to a powerpc board base on 2.6.25 kernel. You should not need to do much but just test. Can you please let me know. This one should just work: http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.32/compat-wireless-2.6.32.3.tar.bz2 Newer stable kernels after this required multiqueue backported which I gave a try but haven't gotten reports from users on: http://bombadil.infradead.org/~mcgrof/tmp/compat-wireless-2.6.32.5-rc3.tar.bz2 Luis -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
