Search Linux Wireless

[PATCH 1/3] ath9k: configure the beacon only if the STA is associated

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



beacons configuration SHOULD be done only if the STA is associated.

Signed-off-by: Senthil Balasubramanian <senthilkumar@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/beacon.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 422454f..d088ebf 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -577,6 +577,13 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	u64 tsf;
 	int num_beacons, offset, dtim_dec_count, cfp_dec_count;

+	/* No need to configure beacon if we are not associated */
+	if (!common->curaid) {
+		ath_print(common, ATH_DBG_BEACON,
+			 "STA is not yet associated..skipping beacon config\n");
+		return;
+	}
+
 	memset(&bs, 0, sizeof(bs));
 	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;

@@ -739,7 +746,6 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 	enum nl80211_iftype iftype;

 	/* Setup the beacon configuration parameters */
-
 	if (vif) {
 		struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;

--
1.6.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux