Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- drivers/net/wireless/b43/phy_n.c | 130 +++++++++++++++++++++++++++++++++++++- 1 files changed, 129 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 60e730a..d738d76 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -712,6 +712,134 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev) b43_nphy_stay_in_carrier_search(dev, 0); } +/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */ +static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev) +{ + struct b43_phy_n *nphy = dev->phy.n; + u8 i, j; + u8 code; + + /* TODO: for PHY >= 3 + s8 *lna1_gain, *lna2_gain; + u8 *gain_db, *gain_bits; + u16 *rfseq_init; + u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 }; + u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 }; + */ + + u8 rfseq_events[3] = { 6, 8, 7 }; + u8 rfseq_delays[3] = { 10, 30, 1 }; + + if (dev->phy.rev >= 3) { + /* TODO */ + } else { + /* Set Clip 2 detect */ + b43_phy_set(dev, B43_NPHY_C1_CGAINI, + B43_NPHY_C1_CGAINI_CL2DETECT); + b43_phy_set(dev, B43_NPHY_C2_CGAINI, + B43_NPHY_C2_CGAINI_CL2DETECT); + + /* Set narrowband clip threshold */ + b43_phy_set(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84); + b43_phy_set(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84); + + if (!dev->phy.is_40mhz) { + /* Set dwell lengths */ + b43_phy_set(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B); + b43_phy_set(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B); + b43_phy_set(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009); + b43_phy_set(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009); + } + + /* Set wideband clip 2 threshold */ + b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES, + ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, + 21); + b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES, + ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, + 21); + + if (!dev->phy.is_40mhz) { + b43_phy_maskset(dev, B43_NPHY_C1_CGAINI, + ~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1); + b43_phy_maskset(dev, B43_NPHY_C2_CGAINI, + ~B43_NPHY_C2_CGAINI_GAINBKOFF, 0x1); + b43_phy_maskset(dev, B43_NPHY_C1_CCK_CGAINI, + ~B43_NPHY_C1_CCK_CGAINI_GAINBKOFF, 0x1); + b43_phy_maskset(dev, B43_NPHY_C2_CCK_CGAINI, + ~B43_NPHY_C2_CCK_CGAINI_GAINBKOFF, 0x1); + } + + b43_phy_set(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C); + + if (nphy->gain_boost) { + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ && + dev->phy.is_40mhz) + code = 4; + else + code = 5; + } else { + code = dev->phy.is_40mhz ? 6 : 7; + } + + /* Set HPVGA2 index */ + b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN, + ~B43_NPHY_C1_INITGAIN_HPVGA2, + code << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT); + b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN, + ~B43_NPHY_C2_INITGAIN_HPVGA2, + code << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT); + + b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, + (code << 8 | 0x7C)); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, + (code << 8 | 0x7C)); + + /* TODO: b43_nphy_adjust_lna_gain_table(dev); */ + + if (nphy->elna_gain_config) { + b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0808); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1); + + b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0C08); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1); + + b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, + (code << 8 | 0x74)); + b43_phy_write(dev, B43_NPHY_TABLE_DATALO, + (code << 8 | 0x74)); + } + + if (dev->phy.rev == 2) { + for (i = 0; i < 4; i++) { + b43_phy_write(dev, B43_NPHY_TABLE_ADDR, + (0x0400 * i) + 0x0020); + for (j = 0; j < 21; j++) + b43_phy_write(dev, + B43_NPHY_TABLE_DATALO, 3 * j); + } + + /* TODO: b43_nphy_set_rf_sequence(dev, 5, + rfseq_events, rfseq_delays, 3);*/ + b43_phy_maskset(dev, B43_NPHY_OVER_DGAIN1, + (u16)~B43_NPHY_OVER_DGAIN_CCKDGECV, + 0x5A << B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT); + + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + b43_phy_maskset(dev, B43_PHY_N(0xC5D), + 0xFF80, 4); + } + } +} + /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Workarounds */ static void b43_nphy_workarounds(struct b43_wldev *dev) { @@ -786,7 +914,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev) /*TODO:b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);*/ /*TODO:b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);*/ - /*TODO:b43_nphy_gain_crtl_workarounds(dev);*/ + b43_nphy_gain_crtl_workarounds(dev); if (dev->phy.rev < 2) { if (b43_phy_read(dev, B43_NPHY_RXCTL) & 0x2) -- 1.6.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
