Search Linux Wireless

[PATCH 2/7] b43: N-PHY: implement TX PHY cleanup and setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
 drivers/net/wireless/b43/phy_n.c |  112 +++++++++++++++++++++++++++++++++++++-
 1 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 4a1853b..34dd4a2 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1505,6 +1505,114 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 	return target;
 }

+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxCalPhyCleanup */
+static void b43_nphy_tx_cal_phy_cleanup(struct b43_wldev *dev)
+{
+	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+
+	if (dev->phy.rev >= 3) {
+		b43_phy_write(dev, B43_NPHY_AFECTL_C1, regs[0]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_C2, regs[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, regs[2]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[3]);
+		b43_phy_write(dev, B43_NPHY_BBCFG, regs[4]);
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 3,
+			width 16, and data from regs[5] */
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 19,
+			width 16, and data from regs[6] */
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[7]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[8]);
+		b43_phy_write(dev, B43_NPHY_PAPD_EN0, regs[9]);
+		b43_phy_write(dev, B43_NPHY_PAPD_EN1, regs[10]);
+		b43_nphy_reset_cca(dev);
+	} else {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, regs[0]);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, regs[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, regs[2]);
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 2,
+			width 16, and data from regs[3] */
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 18,
+			width 16, and data from regs[4] */
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, regs[5]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, regs[6]);
+	}
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxCalPhySetup */
+static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
+{
+	u16 *regs = dev->phy.n->tx_rx_cal_phy_saveregs;
+	u16 tmp;
+
+	regs[0] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
+	regs[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
+	if (dev->phy.rev >= 3) {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0xF0FF, 0x0A00);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0xF0FF, 0x0A00);
+
+		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER1);
+		regs[2] = tmp;
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, tmp | 0x0600);
+
+		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		regs[3] = tmp;
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp | 0x0600);
+
+		regs[4] = b43_phy_read(dev, B43_NPHY_BBCFG);
+		b43_phy_mask(dev, B43_NPHY_BBCFG, ~B43_NPHY_BBCFG_RSTRX);
+
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 3,
+			width 16, and data pointing to tmp */
+		regs[5] = tmp;
+
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 3,
+			width 16, and data 0 */
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 19,
+			width 16, and data pointing to tmp */
+		regs[6] = tmp;
+
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 19,
+			width 16, and data 0 */
+		regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+		regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+
+		/* TODO: Call N PHY RF Ctrl Intc Override with 2, 1, 3 */
+		/* TODO: Call N PHY RF Ctrl Intc Override with 1, 2, 1 */
+		/* TODO: Call N PHY RF Ctrl Intc Override with 1, 8, 2 */
+
+		regs[9] = b43_phy_read(dev, B43_NPHY_PAPD_EN0);
+		regs[10] = b43_phy_read(dev, B43_NPHY_PAPD_EN1);
+		b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x0001);
+		b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x0001);
+	} else {
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C1, 0x0FFF, 0xA000);
+		b43_phy_maskset(dev, B43_NPHY_AFECTL_C2, 0x0FFF, 0xA000);
+		tmp = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		regs[2] = tmp;
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp | 0x3000);
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 2,
+			width 16, and data pointing to tmp */
+		regs[3] = tmp;
+		tmp |= 0x2000;
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 2,
+			width 16, and data pointer tmp */
+		/* TODO: Read an N PHY Table with ID 8, length 1, offset 18,
+			width 16, and data pointer tmp */
+		regs[4] = tmp;
+		tmp |= 0x2000;
+		/* TODO: Write an N PHY Table with ID 8, length 1, offset 18,
+			width 16, and data pointer tmp */
+		regs[5] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+		regs[6] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+			tmp = 0x0180;
+		else
+			tmp = 0x0120;
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, tmp);
+		b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, tmp);
+	}
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal */
 static void b43_nphy_restore_cal(struct b43_wldev *dev)
 {
@@ -1617,7 +1725,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		width 16, and data pointer gain */

 	b43_nphy_tx_cal_radio_setup(dev);
-	/* TODO: Call N PHY TX Cal PHY Setup */
+	b43_nphy_tx_cal_phy_setup(dev);

 	phy6or5x = dev->phy.rev >= 6 ||
 		(dev->phy.rev == 5 && nphy->ipa2g_on &&
@@ -1788,7 +1896,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
 		b43_phy_write(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0);
 	}

-	/* TODO: Call N PHY TX Cal PHY Cleanup */
+	b43_nphy_tx_cal_phy_cleanup(dev);
 	/* TODO: Write an N PHY Table with ID 7, length 2, offset 0x110,
 		width 16, and data from save */

--
1.6.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux