Move initialization/de-initialization related
code to this file.
Signed-off-by: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/Makefile | 1 +
drivers/net/wireless/ath/ath9k/ath9k.h | 5 +
drivers/net/wireless/ath/ath9k/init.c | 856 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/main.c | 839 +------------------------------
4 files changed, 865 insertions(+), 836 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/init.c
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 332d6f2..6b50d5e 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,5 +1,6 @@
ath9k-y += beacon.o \
gpio.o \
+ init.o \
main.o \
recv.o \
xmit.o \
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index bbdca5e..68a4230 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -341,6 +341,8 @@ int ath_beaconq_config(struct ath_softc *sc);
#define ATH_LONG_CALINTERVAL 30000 /* 30 seconds */
#define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */
+void ath_ani_calibrate(unsigned long data);
+
/**********/
/* BTCOEX */
/**********/
@@ -519,6 +521,7 @@ struct ath_wiphy {
int chan_is_ht;
};
+void ath9k_tasklet(unsigned long data);
int ath_reset(struct ath_softc *sc, bool retry_tx);
int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
@@ -535,6 +538,7 @@ static inline void ath_bus_cleanup(struct ath_common *common)
}
extern struct ieee80211_ops ath9k_ops;
+extern int modparam_nohwcrypt;
irqreturn_t ath_isr(int irq, void *dev);
void ath_cleanup(struct ath_softc *sc);
@@ -552,6 +556,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
+bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode);
#ifdef CONFIG_PCI
int ath_pci_init(void);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
new file mode 100644
index 0000000..2bea089
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -0,0 +1,856 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static char *dev_info = "ath9k";
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
+module_param_named(debug, ath9k_debug, uint, 0);
+MODULE_PARM_DESC(debug, "Debugging mask");
+
+int modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
+
+/* We use the hw_value as an index into our private channel structure */
+
+#define CHAN2G(_freq, _idx) { \
+ .center_freq = (_freq), \
+ .hw_value = (_idx), \
+ .max_power = 20, \
+}
+
+#define CHAN5G(_freq, _idx) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .center_freq = (_freq), \
+ .hw_value = (_idx), \
+ .max_power = 20, \
+}
+
+/* Some 2 GHz radios are actually tunable on 2312-2732
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static struct ieee80211_channel ath9k_2ghz_chantable[] = {
+ CHAN2G(2412, 0), /* Channel 1 */
+ CHAN2G(2417, 1), /* Channel 2 */
+ CHAN2G(2422, 2), /* Channel 3 */
+ CHAN2G(2427, 3), /* Channel 4 */
+ CHAN2G(2432, 4), /* Channel 5 */
+ CHAN2G(2437, 5), /* Channel 6 */
+ CHAN2G(2442, 6), /* Channel 7 */
+ CHAN2G(2447, 7), /* Channel 8 */
+ CHAN2G(2452, 8), /* Channel 9 */
+ CHAN2G(2457, 9), /* Channel 10 */
+ CHAN2G(2462, 10), /* Channel 11 */
+ CHAN2G(2467, 11), /* Channel 12 */
+ CHAN2G(2472, 12), /* Channel 13 */
+ CHAN2G(2484, 13), /* Channel 14 */
+};
+
+/* Some 5 GHz radios are actually tunable on XXXX-YYYY
+ * on 5 MHz steps, we support the channels which we know
+ * we have calibration data for all cards though to make
+ * this static */
+static struct ieee80211_channel ath9k_5ghz_chantable[] = {
+ /* _We_ call this UNII 1 */
+ CHAN5G(5180, 14), /* Channel 36 */
+ CHAN5G(5200, 15), /* Channel 40 */
+ CHAN5G(5220, 16), /* Channel 44 */
+ CHAN5G(5240, 17), /* Channel 48 */
+ /* _We_ call this UNII 2 */
+ CHAN5G(5260, 18), /* Channel 52 */
+ CHAN5G(5280, 19), /* Channel 56 */
+ CHAN5G(5300, 20), /* Channel 60 */
+ CHAN5G(5320, 21), /* Channel 64 */
+ /* _We_ call this "Middle band" */
+ CHAN5G(5500, 22), /* Channel 100 */
+ CHAN5G(5520, 23), /* Channel 104 */
+ CHAN5G(5540, 24), /* Channel 108 */
+ CHAN5G(5560, 25), /* Channel 112 */
+ CHAN5G(5580, 26), /* Channel 116 */
+ CHAN5G(5600, 27), /* Channel 120 */
+ CHAN5G(5620, 28), /* Channel 124 */
+ CHAN5G(5640, 29), /* Channel 128 */
+ CHAN5G(5660, 30), /* Channel 132 */
+ CHAN5G(5680, 31), /* Channel 136 */
+ CHAN5G(5700, 32), /* Channel 140 */
+ /* _We_ call this UNII 3 */
+ CHAN5G(5745, 33), /* Channel 149 */
+ CHAN5G(5765, 34), /* Channel 153 */
+ CHAN5G(5785, 35), /* Channel 157 */
+ CHAN5G(5805, 36), /* Channel 161 */
+ CHAN5G(5825, 37), /* Channel 165 */
+};
+
+/* Atheros hardware rate code addition for short premble */
+#define SHPCHECK(__hw_rate, __flags) \
+ ((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
+
+#define RATE(_bitrate, _hw_rate, _flags) { \
+ .bitrate = (_bitrate), \
+ .flags = (_flags), \
+ .hw_value = (_hw_rate), \
+ .hw_value_short = (SHPCHECK(_hw_rate, _flags)) \
+}
+
+static struct ieee80211_rate ath9k_legacy_rates[] = {
+ RATE(10, 0x1b, 0),
+ RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
+ RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
+ RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
+ RATE(60, 0x0b, 0),
+ RATE(90, 0x0f, 0),
+ RATE(120, 0x0a, 0),
+ RATE(180, 0x0e, 0),
+ RATE(240, 0x09, 0),
+ RATE(360, 0x0d, 0),
+ RATE(480, 0x08, 0),
+ RATE(540, 0x0c, 0),
+};
+
+static void ath9k_uninit_hw(struct ath_softc *sc);
+
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests.
+ */
+
+static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&sc->sc_serial_rw, flags);
+ iowrite32(val, sc->mem + reg_offset);
+ spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+ } else
+ iowrite32(val, sc->mem + reg_offset);
+}
+
+static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
+{
+ struct ath_hw *ah = (struct ath_hw *) hw_priv;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_softc *sc = (struct ath_softc *) common->priv;
+ u32 val;
+
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&sc->sc_serial_rw, flags);
+ val = ioread32(sc->mem + reg_offset);
+ spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+ } else
+ val = ioread32(sc->mem + reg_offset);
+ return val;
+}
+
+static const struct ath_ops ath9k_common_ops = {
+ .read = ath9k_ioread32,
+ .write = ath9k_iowrite32,
+};
+
+/**************************/
+/* Initialization */
+/**************************/
+
+static void setup_ht_cap(struct ath_softc *sc,
+ struct ieee80211_sta_ht_cap *ht_info)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ u8 tx_streams, rx_streams;
+
+ ht_info->ht_supported = true;
+ ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_SM_PS |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_DSSSCCK40;
+
+ ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+
+ /* set up supported mcs set */
+ memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+ tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
+ 1 : 2;
+ rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
+ 1 : 2;
+
+ if (tx_streams != rx_streams) {
+ ath_print(common, ATH_DBG_CONFIG,
+ "TX streams %d, RX streams: %d\n",
+ tx_streams, rx_streams);
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+ ht_info->mcs.tx_params |= ((tx_streams - 1) <<
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+ }
+
+ ht_info->mcs.rx_mask[0] = 0xff;
+ if (rx_streams >= 2)
+ ht_info->mcs.rx_mask[1] = 0xff;
+
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+}
+
+static int ath9k_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *request)
+{
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+ struct ath_wiphy *aphy = hw->priv;
+ struct ath_softc *sc = aphy->sc;
+ struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
+
+ return ath_reg_notifier_apply(wiphy, request, reg);
+}
+
+/*
+ * This function will allocate both the DMA descriptor structure, and the
+ * buffers it contains. These are used to contain the descriptors used
+ * by the system.
+*/
+int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
+ struct list_head *head, const char *name,
+ int nbuf, int ndesc)
+{
+#define DS2PHYS(_dd, _ds) \
+ ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
+#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
+#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_desc *ds;
+ struct ath_buf *bf;
+ int i, bsize, error;
+
+ ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
+ name, nbuf, ndesc);
+
+ INIT_LIST_HEAD(head);
+ /* ath_desc must be a multiple of DWORDs */
+ if ((sizeof(struct ath_desc) % 4) != 0) {
+ ath_print(common, ATH_DBG_FATAL,
+ "ath_desc not DWORD aligned\n");
+ BUG_ON((sizeof(struct ath_desc) % 4) != 0);
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
+
+ /*
+ * Need additional DMA memory because we can't use
+ * descriptors that cross the 4K page boundary. Assume
+ * one skipped descriptor per 4K page.
+ */
+ if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+ u32 ndesc_skipped =
+ ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
+ u32 dma_len;
+
+ while (ndesc_skipped) {
+ dma_len = ndesc_skipped * sizeof(struct ath_desc);
+ dd->dd_desc_len += dma_len;
+
+ ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
+ };
+ }
+
+ /* allocate descriptors */
+ dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
+ &dd->dd_desc_paddr, GFP_KERNEL);
+ if (dd->dd_desc == NULL) {
+ error = -ENOMEM;
+ goto fail;
+ }
+ ds = dd->dd_desc;
+ ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
+ name, ds, (u32) dd->dd_desc_len,
+ ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+
+ /* allocate buffers */
+ bsize = sizeof(struct ath_buf) * nbuf;
+ bf = kzalloc(bsize, GFP_KERNEL);
+ if (bf == NULL) {
+ error = -ENOMEM;
+ goto fail2;
+ }
+ dd->dd_bufptr = bf;
+
+ for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+
+ if (!(sc->sc_ah->caps.hw_caps &
+ ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+ /*
+ * Skip descriptor addresses which can cause 4KB
+ * boundary crossing (addr + length) with a 32 dword
+ * descriptor fetch.
+ */
+ while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+ BUG_ON((caddr_t) bf->bf_desc >=
+ ((caddr_t) dd->dd_desc +
+ dd->dd_desc_len));
+
+ ds += ndesc;
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+ }
+ }
+ list_add_tail(&bf->list, head);
+ }
+ return 0;
+fail2:
+ dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
+ dd->dd_desc_paddr);
+fail:
+ memset(dd, 0, sizeof(*dd));
+ return error;
+#undef ATH_DESC_4KB_BOUND_CHECK
+#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
+#undef DS2PHYS
+}
+
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
+ const struct ath_bus_ops *bus_ops)
+{
+ struct ath_hw *ah = NULL;
+ struct ath_common *common;
+ int r = 0, i;
+ int csz = 0;
+ int qnum;
+
+ /* XXX: hardware will not be ready until ath_open() being called */
+ sc->sc_flags |= SC_OP_INVALID;
+
+ spin_lock_init(&sc->wiphy_lock);
+ spin_lock_init(&sc->sc_resetlock);
+ spin_lock_init(&sc->sc_serial_rw);
+ spin_lock_init(&sc->sc_pm_lock);
+ mutex_init(&sc->mutex);
+ tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+ tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
+ (unsigned long)sc);
+
+ ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
+ if (!ah)
+ return -ENOMEM;
+
+ ah->hw_version.devid = devid;
+ ah->hw_version.subsysid = subsysid;
+ sc->sc_ah = ah;
+
+ common = ath9k_hw_common(ah);
+ common->ops = &ath9k_common_ops;
+ common->bus_ops = bus_ops;
+ common->ah = ah;
+ common->hw = sc->hw;
+ common->priv = sc;
+ common->debug_mask = ath9k_debug;
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ ath_read_cachesize(common, &csz);
+ /* XXX assert csz is non-zero */
+ common->cachelsz = csz << 2; /* convert to bytes */
+
+ r = ath9k_hw_init(ah);
+ if (r) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to initialize hardware; "
+ "initialization status: %d\n", r);
+ goto bad_free_hw;
+ }
+
+ if (ath9k_init_debug(ah) < 0) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to create debugfs files\n");
+ goto bad_free_hw;
+ }
+
+ /* Get the hardware key cache size. */
+ common->keymax = ah->caps.keycache_size;
+ if (common->keymax > ATH_KEYMAX) {
+ ath_print(common, ATH_DBG_ANY,
+ "Warning, using only %u entries in %u key cache\n",
+ ATH_KEYMAX, common->keymax);
+ common->keymax = ATH_KEYMAX;
+ }
+
+ /*
+ * Reset the key cache since some parts do not
+ * reset the contents on initial power up.
+ */
+ for (i = 0; i < common->keymax; i++)
+ ath9k_hw_keyreset(ah, (u16) i);
+
+ /* default to MONITOR mode */
+ sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+
+ /*
+ * Allocate hardware transmit queues: one queue for
+ * beacon frames and one data queue for each QoS
+ * priority. Note that the hal handles reseting
+ * these queues at the needed time.
+ */
+ sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
+ if (sc->beacon.beaconq == -1) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to setup a beacon xmit queue\n");
+ r = -EIO;
+ goto bad2;
+ }
+ sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
+ if (sc->beacon.cabq == NULL) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to setup CAB xmit queue\n");
+ r = -EIO;
+ goto bad2;
+ }
+
+ sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
+ ath_cabq_update(sc);
+
+ for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
+ sc->tx.hwq_map[i] = -1;
+
+ /* Setup data queues */
+ /* NB: ensure BK queue is the lowest priority h/w queue */
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to setup xmit queue for BK traffic\n");
+ r = -EIO;
+ goto bad2;
+ }
+
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to setup xmit queue for BE traffic\n");
+ r = -EIO;
+ goto bad2;
+ }
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to setup xmit queue for VI traffic\n");
+ r = -EIO;
+ goto bad2;
+ }
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to setup xmit queue for VO traffic\n");
+ r = -EIO;
+ goto bad2;
+ }
+
+ /* Initializes the noise floor to a reasonable default value.
+ * Later on this will be updated during ANI processing. */
+
+ common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
+ setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
+
+ if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+ ATH9K_CIPHER_TKIP, NULL)) {
+ /*
+ * Whether we should enable h/w TKIP MIC.
+ * XXX: if we don't support WME TKIP MIC, then we wouldn't
+ * report WMM capable, so it's always safe to turn on
+ * TKIP MIC in this case.
+ */
+ ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
+ 0, 1, NULL);
+ }
+
+ /*
+ * Check whether the separate key cache entries
+ * are required to handle both tx+rx MIC keys.
+ * With split mic keys the number of stations is limited
+ * to 27 otherwise 59.
+ */
+ if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+ ATH9K_CIPHER_TKIP, NULL)
+ && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+ ATH9K_CIPHER_MIC, NULL)
+ && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+ 0, NULL))
+ common->splitmic = 1;
+
+ /* turn on mcast key search if possible */
+ if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+ (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
+ 1, NULL);
+
+ sc->config.txpowlimit = ATH_TXPOWER_MAX;
+
+ /* 11n Capabilities */
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+ sc->sc_flags |= SC_OP_TXAGGR;
+ sc->sc_flags |= SC_OP_RXAGGR;
+ }
+
+ common->tx_chainmask = ah->caps.tx_chainmask;
+ common->rx_chainmask = ah->caps.rx_chainmask;
+
+ ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+ sc->rx.defant = ath9k_hw_getdefantenna(ah);
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
+ memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
+
+ sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
+
+ /* initialize beacon slots */
+ for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
+ sc->beacon.bslot[i] = NULL;
+ sc->beacon.bslot_aphy[i] = NULL;
+ }
+
+ /* setup channels and rates */
+
+ if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
+ sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+ sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+ sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
+ ARRAY_SIZE(ath9k_2ghz_chantable);
+ sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
+ sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
+ ARRAY_SIZE(ath9k_legacy_rates);
+ }
+
+ if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
+ sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
+ sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
+ sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
+ ARRAY_SIZE(ath9k_5ghz_chantable);
+ sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+ ath9k_legacy_rates + 4;
+ sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
+ ARRAY_SIZE(ath9k_legacy_rates) - 4;
+ }
+
+ switch (ah->btcoex_hw.scheme) {
+ case ATH_BTCOEX_CFG_NONE:
+ break;
+ case ATH_BTCOEX_CFG_2WIRE:
+ ath9k_hw_btcoex_init_2wire(ah);
+ break;
+ case ATH_BTCOEX_CFG_3WIRE:
+ ath9k_hw_btcoex_init_3wire(ah);
+ r = ath_init_btcoex_timer(sc);
+ if (r)
+ goto bad2;
+ qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+ ath9k_hw_init_btcoex_hw(ah, qnum);
+ sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ return 0;
+bad2:
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+bad_free_hw:
+ ath9k_uninit_hw(sc);
+ return r;
+}
+
+void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+{
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_AMPDU_AGGREGATION |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_PS_NULLFUNC_STACK |
+ IEEE80211_HW_SPECTRUM_MGMT;
+
+ if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
+ hw->flags |= IEEE80211_HW_MFP_CAPABLE;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+ hw->queues = 4;
+ hw->max_rates = 4;
+ hw->channel_change_time = 5000;
+ hw->max_listen_interval = 10;
+ /* Hardware supports 10 but we use 4 */
+ hw->max_rate_tries = 4;
+ hw->sta_data_size = sizeof(struct ath_node);
+ hw->vif_data_size = sizeof(struct ath_vif);
+
+ hw->rate_control_algorithm = "ath9k_rate_control";
+
+ if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &sc->sbands[IEEE80211_BAND_2GHZ];
+ if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &sc->sbands[IEEE80211_BAND_5GHZ];
+}
+
+/* Device driver core initialization */
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+ const struct ath_bus_ops *bus_ops)
+{
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath_common *common;
+ struct ath_hw *ah;
+ int error = 0, i;
+ struct ath_regulatory *reg;
+
+ dev_dbg(sc->dev, "Attach ATH hw\n");
+
+ error = ath_init_softc(devid, sc, subsysid, bus_ops);
+ if (error != 0)
+ return error;
+
+ ah = sc->sc_ah;
+ common = ath9k_hw_common(ah);
+
+ /* get mac address from hardware and set in mac80211 */
+
+ SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
+
+ ath_set_hw_capab(sc, hw);
+
+ error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
+ ath9k_reg_notifier);
+ if (error)
+ return error;
+
+ reg = &common->regulatory;
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+ if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
+ setup_ht_cap(sc,
+ &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+ if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
+ setup_ht_cap(sc,
+ &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+ }
+
+ /* initialize tx/rx engine */
+ error = ath_tx_init(sc, ATH_TXBUF);
+ if (error != 0)
+ goto error_attach;
+
+ error = ath_rx_init(sc, ATH_RXBUF);
+ if (error != 0)
+ goto error_attach;
+
+ INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
+ INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
+ sc->wiphy_scheduler_int = msecs_to_jiffies(500);
+
+ error = ieee80211_register_hw(hw);
+
+ if (!ath_is_world_regd(reg)) {
+ error = regulatory_hint(hw->wiphy, reg->alpha2);
+ if (error)
+ goto error_attach;
+ }
+
+ /* Initialize LED control */
+ ath_init_leds(sc);
+
+ ath_start_rfkill_poll(sc);
+
+ return 0;
+
+error_attach:
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+ ath9k_uninit_hw(sc);
+
+ return error;
+}
+
+/*****************************/
+/* De-Initialization */
+/*****************************/
+
+static void ath9k_uninit_hw(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+
+ BUG_ON(!ah);
+
+ ath9k_exit_debug(ah);
+ ath9k_hw_detach(ah);
+ sc->sc_ah = NULL;
+}
+
+static void ath_clean_core(struct ath_softc *sc)
+{
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath_hw *ah = sc->sc_ah;
+ int i = 0;
+
+ ath9k_ps_wakeup(sc);
+
+ dev_dbg(sc->dev, "Detach ATH hw\n");
+
+ ath_deinit_leds(sc);
+ wiphy_rfkill_stop_polling(sc->hw->wiphy);
+
+ for (i = 0; i < sc->num_sec_wiphy; i++) {
+ struct ath_wiphy *aphy = sc->sec_wiphy[i];
+ if (aphy == NULL)
+ continue;
+ sc->sec_wiphy[i] = NULL;
+ ieee80211_unregister_hw(aphy->hw);
+ ieee80211_free_hw(aphy->hw);
+ }
+ ieee80211_unregister_hw(hw);
+ ath_rx_cleanup(sc);
+ ath_tx_cleanup(sc);
+
+ tasklet_kill(&sc->intr_tq);
+ tasklet_kill(&sc->bcon_tasklet);
+
+ if (!(sc->sc_flags & SC_OP_INVALID))
+ ath9k_setpower(sc, ATH9K_PM_AWAKE);
+
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+ if ((sc->btcoex.no_stomp_timer) &&
+ ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+ ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
+}
+
+void ath_descdma_cleanup(struct ath_softc *sc,
+ struct ath_descdma *dd,
+ struct list_head *head)
+{
+ dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
+ dd->dd_desc_paddr);
+
+ INIT_LIST_HEAD(head);
+ kfree(dd->dd_bufptr);
+ memset(dd, 0, sizeof(*dd));
+}
+
+void ath_detach(struct ath_softc *sc)
+{
+ ath_clean_core(sc);
+ ath9k_uninit_hw(sc);
+}
+
+void ath_cleanup(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ ath_clean_core(sc);
+ free_irq(sc->irq, sc);
+ ath_bus_cleanup(common);
+ kfree(sc->sec_wiphy);
+ ieee80211_free_hw(sc->hw);
+
+ ath9k_uninit_hw(sc);
+}
+
+/************************/
+/* Module Hooks */
+/************************/
+
+static int __init ath9k_init(void)
+{
+ int error;
+
+ /* Register rate control algorithm */
+ error = ath_rate_control_register();
+ if (error != 0) {
+ printk(KERN_ERR
+ "ath9k: Unable to register rate control "
+ "algorithm: %d\n",
+ error);
+ goto err_out;
+ }
+
+ error = ath9k_debug_create_root();
+ if (error) {
+ printk(KERN_ERR
+ "ath9k: Unable to create debugfs root: %d\n",
+ error);
+ goto err_rate_unregister;
+ }
+
+ error = ath_pci_init();
+ if (error < 0) {
+ printk(KERN_ERR
+ "ath9k: No PCI devices found, driver not installed.\n");
+ error = -ENODEV;
+ goto err_remove_root;
+ }
+
+ error = ath_ahb_init();
+ if (error < 0) {
+ error = -ENODEV;
+ goto err_pci_exit;
+ }
+
+ return 0;
+
+ err_pci_exit:
+ ath_pci_exit();
+
+ err_remove_root:
+ ath9k_debug_remove_root();
+ err_rate_unregister:
+ ath_rate_control_unregister();
+ err_out:
+ return error;
+}
+module_init(ath9k_init);
+
+static void __exit ath9k_exit(void)
+{
+ ath_ahb_exit();
+ ath_pci_exit();
+ ath9k_debug_remove_root();
+ ath_rate_control_unregister();
+ printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
+}
+module_exit(ath9k_exit);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 31fcfc6..48bd5d5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -18,118 +18,6 @@
#include "ath9k.h"
#include "btcoex.h"
-static char *dev_info = "ath9k";
-
-MODULE_AUTHOR("Atheros Communications");
-MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
-MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
-MODULE_LICENSE("Dual BSD/GPL");
-
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
-
-static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
-module_param_named(debug, ath9k_debug, uint, 0);
-MODULE_PARM_DESC(debug, "Debugging mask");
-
-/* We use the hw_value as an index into our private channel structure */
-
-#define CHAN2G(_freq, _idx) { \
- .center_freq = (_freq), \
- .hw_value = (_idx), \
- .max_power = 20, \
-}
-
-#define CHAN5G(_freq, _idx) { \
- .band = IEEE80211_BAND_5GHZ, \
- .center_freq = (_freq), \
- .hw_value = (_idx), \
- .max_power = 20, \
-}
-
-/* Some 2 GHz radios are actually tunable on 2312-2732
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static struct ieee80211_channel ath9k_2ghz_chantable[] = {
- CHAN2G(2412, 0), /* Channel 1 */
- CHAN2G(2417, 1), /* Channel 2 */
- CHAN2G(2422, 2), /* Channel 3 */
- CHAN2G(2427, 3), /* Channel 4 */
- CHAN2G(2432, 4), /* Channel 5 */
- CHAN2G(2437, 5), /* Channel 6 */
- CHAN2G(2442, 6), /* Channel 7 */
- CHAN2G(2447, 7), /* Channel 8 */
- CHAN2G(2452, 8), /* Channel 9 */
- CHAN2G(2457, 9), /* Channel 10 */
- CHAN2G(2462, 10), /* Channel 11 */
- CHAN2G(2467, 11), /* Channel 12 */
- CHAN2G(2472, 12), /* Channel 13 */
- CHAN2G(2484, 13), /* Channel 14 */
-};
-
-/* Some 5 GHz radios are actually tunable on XXXX-YYYY
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static struct ieee80211_channel ath9k_5ghz_chantable[] = {
- /* _We_ call this UNII 1 */
- CHAN5G(5180, 14), /* Channel 36 */
- CHAN5G(5200, 15), /* Channel 40 */
- CHAN5G(5220, 16), /* Channel 44 */
- CHAN5G(5240, 17), /* Channel 48 */
- /* _We_ call this UNII 2 */
- CHAN5G(5260, 18), /* Channel 52 */
- CHAN5G(5280, 19), /* Channel 56 */
- CHAN5G(5300, 20), /* Channel 60 */
- CHAN5G(5320, 21), /* Channel 64 */
- /* _We_ call this "Middle band" */
- CHAN5G(5500, 22), /* Channel 100 */
- CHAN5G(5520, 23), /* Channel 104 */
- CHAN5G(5540, 24), /* Channel 108 */
- CHAN5G(5560, 25), /* Channel 112 */
- CHAN5G(5580, 26), /* Channel 116 */
- CHAN5G(5600, 27), /* Channel 120 */
- CHAN5G(5620, 28), /* Channel 124 */
- CHAN5G(5640, 29), /* Channel 128 */
- CHAN5G(5660, 30), /* Channel 132 */
- CHAN5G(5680, 31), /* Channel 136 */
- CHAN5G(5700, 32), /* Channel 140 */
- /* _We_ call this UNII 3 */
- CHAN5G(5745, 33), /* Channel 149 */
- CHAN5G(5765, 34), /* Channel 153 */
- CHAN5G(5785, 35), /* Channel 157 */
- CHAN5G(5805, 36), /* Channel 161 */
- CHAN5G(5825, 37), /* Channel 165 */
-};
-
-/* Atheros hardware rate code addition for short premble */
-#define SHPCHECK(__hw_rate, __flags) \
- ((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
-
-#define RATE(_bitrate, _hw_rate, _flags) { \
- .bitrate = (_bitrate), \
- .flags = (_flags), \
- .hw_value = (_hw_rate), \
- .hw_value_short = (SHPCHECK(_hw_rate, _flags)) \
-}
-
-static struct ieee80211_rate ath9k_legacy_rates[] = {
- RATE(10, 0x1b, 0),
- RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(60, 0x0b, 0),
- RATE(90, 0x0f, 0),
- RATE(120, 0x0a, 0),
- RATE(180, 0x0e, 0),
- RATE(240, 0x09, 0),
- RATE(360, 0x0d, 0),
- RATE(480, 0x08, 0),
- RATE(540, 0x0c, 0),
-};
-
static void ath_cache_conf_rate(struct ath_softc *sc,
struct ieee80211_conf *conf)
{
@@ -221,7 +109,7 @@ static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
return channel;
}
-static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
+bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
{
unsigned long flags;
bool ret;
@@ -349,7 +237,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
* When the task is complete, it reschedules itself depending on the
* appropriate interval that was calculated.
*/
-static void ath_ani_calibrate(unsigned long data)
+void ath_ani_calibrate(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
struct ath_hw *ah = sc->sc_ah;
@@ -504,7 +392,7 @@ static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
ath_tx_node_cleanup(sc, an);
}
-static void ath9k_tasklet(unsigned long data)
+void ath9k_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
struct ath_hw *ah = sc->sc_ah;
@@ -924,44 +812,6 @@ static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf
}
}
-static void setup_ht_cap(struct ath_softc *sc,
- struct ieee80211_sta_ht_cap *ht_info)
-{
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- u8 tx_streams, rx_streams;
-
- ht_info->ht_supported = true;
- ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
- IEEE80211_HT_CAP_SM_PS |
- IEEE80211_HT_CAP_SGI_40 |
- IEEE80211_HT_CAP_DSSSCCK40;
-
- ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
- ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-
- /* set up supported mcs set */
- memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
- tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
- 1 : 2;
- rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
- 1 : 2;
-
- if (tx_streams != rx_streams) {
- ath_print(common, ATH_DBG_CONFIG,
- "TX streams %d, RX streams: %d\n",
- tx_streams, rx_streams);
- ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
- ht_info->mcs.tx_params |= ((tx_streams - 1) <<
- IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
- }
-
- ht_info->mcs.rx_mask[0] = 0xff;
- if (rx_streams >= 2)
- ht_info->mcs.rx_mask[1] = 0xff;
-
- ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-}
-
static void ath9k_bss_assoc_info(struct ath_softc *sc,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
@@ -1084,510 +934,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
}
-static void ath9k_uninit_hw(struct ath_softc *sc)
-{
- struct ath_hw *ah = sc->sc_ah;
-
- BUG_ON(!ah);
-
- ath9k_exit_debug(ah);
- ath9k_hw_detach(ah);
- sc->sc_ah = NULL;
-}
-
-static void ath_clean_core(struct ath_softc *sc)
-{
- struct ieee80211_hw *hw = sc->hw;
- struct ath_hw *ah = sc->sc_ah;
- int i = 0;
-
- ath9k_ps_wakeup(sc);
-
- dev_dbg(sc->dev, "Detach ATH hw\n");
-
- ath_deinit_leds(sc);
- wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
- for (i = 0; i < sc->num_sec_wiphy; i++) {
- struct ath_wiphy *aphy = sc->sec_wiphy[i];
- if (aphy == NULL)
- continue;
- sc->sec_wiphy[i] = NULL;
- ieee80211_unregister_hw(aphy->hw);
- ieee80211_free_hw(aphy->hw);
- }
- ieee80211_unregister_hw(hw);
- ath_rx_cleanup(sc);
- ath_tx_cleanup(sc);
-
- tasklet_kill(&sc->intr_tq);
- tasklet_kill(&sc->bcon_tasklet);
-
- if (!(sc->sc_flags & SC_OP_INVALID))
- ath9k_setpower(sc, ATH9K_PM_AWAKE);
-
- /* cleanup tx queues */
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i))
- ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
- if ((sc->btcoex.no_stomp_timer) &&
- ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
- ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
-}
-
-void ath_detach(struct ath_softc *sc)
-{
- ath_clean_core(sc);
- ath9k_uninit_hw(sc);
-}
-
-void ath_cleanup(struct ath_softc *sc)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
-
- ath_clean_core(sc);
- free_irq(sc->irq, sc);
- ath_bus_cleanup(common);
- kfree(sc->sec_wiphy);
- ieee80211_free_hw(sc->hw);
-
- ath9k_uninit_hw(sc);
-}
-
-static int ath9k_reg_notifier(struct wiphy *wiphy,
- struct regulatory_request *request)
-{
- struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
- struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
-
- return ath_reg_notifier_apply(wiphy, request, reg);
-}
-
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
-{
- struct ath_hw *ah = (struct ath_hw *) hw_priv;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ath_softc *sc = (struct ath_softc *) common->priv;
-
- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
- unsigned long flags;
- spin_lock_irqsave(&sc->sc_serial_rw, flags);
- iowrite32(val, sc->mem + reg_offset);
- spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
- } else
- iowrite32(val, sc->mem + reg_offset);
-}
-
-static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
-{
- struct ath_hw *ah = (struct ath_hw *) hw_priv;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ath_softc *sc = (struct ath_softc *) common->priv;
- u32 val;
-
- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
- unsigned long flags;
- spin_lock_irqsave(&sc->sc_serial_rw, flags);
- val = ioread32(sc->mem + reg_offset);
- spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
- } else
- val = ioread32(sc->mem + reg_offset);
- return val;
-}
-
-static const struct ath_ops ath9k_common_ops = {
- .read = ath9k_ioread32,
- .write = ath9k_iowrite32,
-};
-
-/*
- * Initialize and fill ath_softc, ath_sofct is the
- * "Software Carrier" struct. Historically it has existed
- * to allow the separation between hardware specific
- * variables (now in ath_hw) and driver specific variables.
- */
-static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
- const struct ath_bus_ops *bus_ops)
-{
- struct ath_hw *ah = NULL;
- struct ath_common *common;
- int r = 0, i;
- int csz = 0;
- int qnum;
-
- /* XXX: hardware will not be ready until ath_open() being called */
- sc->sc_flags |= SC_OP_INVALID;
-
- spin_lock_init(&sc->wiphy_lock);
- spin_lock_init(&sc->sc_resetlock);
- spin_lock_init(&sc->sc_serial_rw);
- spin_lock_init(&sc->sc_pm_lock);
- mutex_init(&sc->mutex);
- tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
- tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
- (unsigned long)sc);
-
- ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
- if (!ah)
- return -ENOMEM;
-
- ah->hw_version.devid = devid;
- ah->hw_version.subsysid = subsysid;
- sc->sc_ah = ah;
-
- common = ath9k_hw_common(ah);
- common->ops = &ath9k_common_ops;
- common->bus_ops = bus_ops;
- common->ah = ah;
- common->hw = sc->hw;
- common->priv = sc;
- common->debug_mask = ath9k_debug;
-
- /*
- * Cache line size is used to size and align various
- * structures used to communicate with the hardware.
- */
- ath_read_cachesize(common, &csz);
- /* XXX assert csz is non-zero */
- common->cachelsz = csz << 2; /* convert to bytes */
-
- r = ath9k_hw_init(ah);
- if (r) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to initialize hardware; "
- "initialization status: %d\n", r);
- goto bad_free_hw;
- }
-
- if (ath9k_init_debug(ah) < 0) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to create debugfs files\n");
- goto bad_free_hw;
- }
-
- /* Get the hardware key cache size. */
- common->keymax = ah->caps.keycache_size;
- if (common->keymax > ATH_KEYMAX) {
- ath_print(common, ATH_DBG_ANY,
- "Warning, using only %u entries in %u key cache\n",
- ATH_KEYMAX, common->keymax);
- common->keymax = ATH_KEYMAX;
- }
-
- /*
- * Reset the key cache since some parts do not
- * reset the contents on initial power up.
- */
- for (i = 0; i < common->keymax; i++)
- ath9k_hw_keyreset(ah, (u16) i);
-
- /* default to MONITOR mode */
- sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
-
- /*
- * Allocate hardware transmit queues: one queue for
- * beacon frames and one data queue for each QoS
- * priority. Note that the hal handles reseting
- * these queues at the needed time.
- */
- sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
- if (sc->beacon.beaconq == -1) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to setup a beacon xmit queue\n");
- r = -EIO;
- goto bad2;
- }
- sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
- if (sc->beacon.cabq == NULL) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to setup CAB xmit queue\n");
- r = -EIO;
- goto bad2;
- }
-
- sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
- ath_cabq_update(sc);
-
- for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
- sc->tx.hwq_map[i] = -1;
-
- /* Setup data queues */
- /* NB: ensure BK queue is the lowest priority h/w queue */
- if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to setup xmit queue for BK traffic\n");
- r = -EIO;
- goto bad2;
- }
-
- if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to setup xmit queue for BE traffic\n");
- r = -EIO;
- goto bad2;
- }
- if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to setup xmit queue for VI traffic\n");
- r = -EIO;
- goto bad2;
- }
- if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
- ath_print(common, ATH_DBG_FATAL,
- "Unable to setup xmit queue for VO traffic\n");
- r = -EIO;
- goto bad2;
- }
-
- /* Initializes the noise floor to a reasonable default value.
- * Later on this will be updated during ANI processing. */
-
- common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
- setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
-
- if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
- ATH9K_CIPHER_TKIP, NULL)) {
- /*
- * Whether we should enable h/w TKIP MIC.
- * XXX: if we don't support WME TKIP MIC, then we wouldn't
- * report WMM capable, so it's always safe to turn on
- * TKIP MIC in this case.
- */
- ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
- 0, 1, NULL);
- }
-
- /*
- * Check whether the separate key cache entries
- * are required to handle both tx+rx MIC keys.
- * With split mic keys the number of stations is limited
- * to 27 otherwise 59.
- */
- if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
- ATH9K_CIPHER_TKIP, NULL)
- && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
- ATH9K_CIPHER_MIC, NULL)
- && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
- 0, NULL))
- common->splitmic = 1;
-
- /* turn on mcast key search if possible */
- if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
- (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
- 1, NULL);
-
- sc->config.txpowlimit = ATH_TXPOWER_MAX;
-
- /* 11n Capabilities */
- if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
- sc->sc_flags |= SC_OP_TXAGGR;
- sc->sc_flags |= SC_OP_RXAGGR;
- }
-
- common->tx_chainmask = ah->caps.tx_chainmask;
- common->rx_chainmask = ah->caps.rx_chainmask;
-
- ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
- sc->rx.defant = ath9k_hw_getdefantenna(ah);
-
- if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
- memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
-
- sc->beacon.slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
-
- /* initialize beacon slots */
- for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
- sc->beacon.bslot[i] = NULL;
- sc->beacon.bslot_aphy[i] = NULL;
- }
-
- /* setup channels and rates */
-
- if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
- sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
- sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
- ARRAY_SIZE(ath9k_2ghz_chantable);
- sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
- sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
- ARRAY_SIZE(ath9k_legacy_rates);
- }
-
- if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
- sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
- sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
- ARRAY_SIZE(ath9k_5ghz_chantable);
- sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
- ath9k_legacy_rates + 4;
- sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
- ARRAY_SIZE(ath9k_legacy_rates) - 4;
- }
-
- switch (ah->btcoex_hw.scheme) {
- case ATH_BTCOEX_CFG_NONE:
- break;
- case ATH_BTCOEX_CFG_2WIRE:
- ath9k_hw_btcoex_init_2wire(ah);
- break;
- case ATH_BTCOEX_CFG_3WIRE:
- ath9k_hw_btcoex_init_3wire(ah);
- r = ath_init_btcoex_timer(sc);
- if (r)
- goto bad2;
- qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
- ath9k_hw_init_btcoex_hw(ah, qnum);
- sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
- break;
- default:
- WARN_ON(1);
- break;
- }
-
- return 0;
-bad2:
- /* cleanup tx queues */
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i))
- ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-bad_free_hw:
- ath9k_uninit_hw(sc);
- return r;
-}
-
-void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_AMPDU_AGGREGATION |
- IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK |
- IEEE80211_HW_SPECTRUM_MGMT;
-
- if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
- hw->flags |= IEEE80211_HW_MFP_CAPABLE;
-
- hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_MESH_POINT);
-
- hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
-
- hw->queues = 4;
- hw->max_rates = 4;
- hw->channel_change_time = 5000;
- hw->max_listen_interval = 10;
- /* Hardware supports 10 but we use 4 */
- hw->max_rate_tries = 4;
- hw->sta_data_size = sizeof(struct ath_node);
- hw->vif_data_size = sizeof(struct ath_vif);
-
- hw->rate_control_algorithm = "ath9k_rate_control";
-
- if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &sc->sbands[IEEE80211_BAND_2GHZ];
- if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
- hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &sc->sbands[IEEE80211_BAND_5GHZ];
-}
-
-/* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
- const struct ath_bus_ops *bus_ops)
-{
- struct ieee80211_hw *hw = sc->hw;
- struct ath_common *common;
- struct ath_hw *ah;
- int error = 0, i;
- struct ath_regulatory *reg;
-
- dev_dbg(sc->dev, "Attach ATH hw\n");
-
- error = ath_init_softc(devid, sc, subsysid, bus_ops);
- if (error != 0)
- return error;
-
- ah = sc->sc_ah;
- common = ath9k_hw_common(ah);
-
- /* get mac address from hardware and set in mac80211 */
-
- SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
-
- ath_set_hw_capab(sc, hw);
-
- error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
- ath9k_reg_notifier);
- if (error)
- return error;
-
- reg = &common->regulatory;
-
- if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
- if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
- setup_ht_cap(sc,
- &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
- if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
- setup_ht_cap(sc,
- &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
- }
-
- /* initialize tx/rx engine */
- error = ath_tx_init(sc, ATH_TXBUF);
- if (error != 0)
- goto error_attach;
-
- error = ath_rx_init(sc, ATH_RXBUF);
- if (error != 0)
- goto error_attach;
-
- INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
- INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
- sc->wiphy_scheduler_int = msecs_to_jiffies(500);
-
- error = ieee80211_register_hw(hw);
-
- if (!ath_is_world_regd(reg)) {
- error = regulatory_hint(hw->wiphy, reg->alpha2);
- if (error)
- goto error_attach;
- }
-
- /* Initialize LED control */
- ath_init_leds(sc);
-
- ath_start_rfkill_poll(sc);
-
- return 0;
-
-error_attach:
- /* cleanup tx queues */
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i))
- ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
- ath9k_uninit_hw(sc);
-
- return error;
-}
-
int ath_reset(struct ath_softc *sc, bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
@@ -1645,125 +991,6 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
return r;
}
-/*
- * This function will allocate both the DMA descriptor structure, and the
- * buffers it contains. These are used to contain the descriptors used
- * by the system.
-*/
-int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
- struct list_head *head, const char *name,
- int nbuf, int ndesc)
-{
-#define DS2PHYS(_dd, _ds) \
- ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
-#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
-#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
- struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ath_desc *ds;
- struct ath_buf *bf;
- int i, bsize, error;
-
- ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
- name, nbuf, ndesc);
-
- INIT_LIST_HEAD(head);
- /* ath_desc must be a multiple of DWORDs */
- if ((sizeof(struct ath_desc) % 4) != 0) {
- ath_print(common, ATH_DBG_FATAL,
- "ath_desc not DWORD aligned\n");
- BUG_ON((sizeof(struct ath_desc) % 4) != 0);
- error = -ENOMEM;
- goto fail;
- }
-
- dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
-
- /*
- * Need additional DMA memory because we can't use
- * descriptors that cross the 4K page boundary. Assume
- * one skipped descriptor per 4K page.
- */
- if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
- u32 ndesc_skipped =
- ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
- u32 dma_len;
-
- while (ndesc_skipped) {
- dma_len = ndesc_skipped * sizeof(struct ath_desc);
- dd->dd_desc_len += dma_len;
-
- ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
- };
- }
-
- /* allocate descriptors */
- dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len,
- &dd->dd_desc_paddr, GFP_KERNEL);
- if (dd->dd_desc == NULL) {
- error = -ENOMEM;
- goto fail;
- }
- ds = dd->dd_desc;
- ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
- name, ds, (u32) dd->dd_desc_len,
- ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
-
- /* allocate buffers */
- bsize = sizeof(struct ath_buf) * nbuf;
- bf = kzalloc(bsize, GFP_KERNEL);
- if (bf == NULL) {
- error = -ENOMEM;
- goto fail2;
- }
- dd->dd_bufptr = bf;
-
- for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
- bf->bf_desc = ds;
- bf->bf_daddr = DS2PHYS(dd, ds);
-
- if (!(sc->sc_ah->caps.hw_caps &
- ATH9K_HW_CAP_4KB_SPLITTRANS)) {
- /*
- * Skip descriptor addresses which can cause 4KB
- * boundary crossing (addr + length) with a 32 dword
- * descriptor fetch.
- */
- while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
- BUG_ON((caddr_t) bf->bf_desc >=
- ((caddr_t) dd->dd_desc +
- dd->dd_desc_len));
-
- ds += ndesc;
- bf->bf_desc = ds;
- bf->bf_daddr = DS2PHYS(dd, ds);
- }
- }
- list_add_tail(&bf->list, head);
- }
- return 0;
-fail2:
- dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
- dd->dd_desc_paddr);
-fail:
- memset(dd, 0, sizeof(*dd));
- return error;
-#undef ATH_DESC_4KB_BOUND_CHECK
-#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
-#undef DS2PHYS
-}
-
-void ath_descdma_cleanup(struct ath_softc *sc,
- struct ath_descdma *dd,
- struct list_head *head)
-{
- dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc,
- dd->dd_desc_paddr);
-
- INIT_LIST_HEAD(head);
- kfree(dd->dd_bufptr);
- memset(dd, 0, sizeof(*dd));
-}
-
int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
{
int qnum;
@@ -2775,63 +2002,3 @@ struct ieee80211_ops ath9k_ops = {
.sw_scan_complete = ath9k_sw_scan_complete,
.rfkill_poll = ath9k_rfkill_poll_state,
};
-
-static int __init ath9k_init(void)
-{
- int error;
-
- /* Register rate control algorithm */
- error = ath_rate_control_register();
- if (error != 0) {
- printk(KERN_ERR
- "ath9k: Unable to register rate control "
- "algorithm: %d\n",
- error);
- goto err_out;
- }
-
- error = ath9k_debug_create_root();
- if (error) {
- printk(KERN_ERR
- "ath9k: Unable to create debugfs root: %d\n",
- error);
- goto err_rate_unregister;
- }
-
- error = ath_pci_init();
- if (error < 0) {
- printk(KERN_ERR
- "ath9k: No PCI devices found, driver not installed.\n");
- error = -ENODEV;
- goto err_remove_root;
- }
-
- error = ath_ahb_init();
- if (error < 0) {
- error = -ENODEV;
- goto err_pci_exit;
- }
-
- return 0;
-
- err_pci_exit:
- ath_pci_exit();
-
- err_remove_root:
- ath9k_debug_remove_root();
- err_rate_unregister:
- ath_rate_control_unregister();
- err_out:
- return error;
-}
-module_init(ath9k_init);
-
-static void __exit ath9k_exit(void)
-{
- ath_ahb_exit();
- ath_pci_exit();
- ath9k_debug_remove_root();
- ath_rate_control_unregister();
- printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
-}
-module_exit(ath9k_exit);
--
1.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
