From: Benoit Papillault <benoit.papillault@xxxxxxx>
According to Ralink source code, the RX frame format is RXINFO + RXWI +
802.11 frame + RXD, including various padding. Before this patch, we
were using RXD + RXWI + 802.11 frame, so RXD was not correct.
Doing this, we fix the L2PAD bit which is now correctly set on received
frames.
Signed-off-by: Benoit Papillault <benoit.papillault@xxxxxxx>
Acked-by: Ivo van Doorn <ivdoorn@xxxxxxxxx>
Acked-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800usb.c | 38 +++++++++----
drivers/net/wireless/rt2x00/rt2800usb.h | 90 ++++++++++++++++++++++++-------
2 files changed, 97 insertions(+), 31 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index c146c48..e41aa19 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -573,41 +573,57 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- __le32 *rxd = (__le32 *)entry->skb->data;
+ __le32 *rxi = (__le32 *)entry->skb->data;
__le32 *rxwi;
- u32 rxd0;
+ __le32 *rxd;
+ u32 rxi0;
u32 rxwi0;
u32 rxwi1;
u32 rxwi2;
u32 rxwi3;
+ u32 rxd0;
+ int rx_pkt_len;
+
+ /*
+ * RX frame format is :
+ * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
+ * |<------------ rx_pkt_len -------------->|
+ */
+ rt2x00_desc_read(rxi, 0, &rxi0);
+ rx_pkt_len = rt2x00_get_field32(rxi0, RXINFO_W0_USB_DMA_RX_PKT_LEN);
+
+ rxwi = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE);
+
+ /*
+ * FIXME : we need to check for rx_pkt_len validity
+ */
+ rxd = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE + rx_pkt_len);
/*
* Copy descriptor to the skbdesc->desc buffer, making it safe from
* moving of frame data in rt2x00usb.
*/
- memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
- rxd = (__le32 *)skbdesc->desc;
- rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)];
+ memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
/*
* It is now safe to read the descriptor on all architectures.
*/
- rt2x00_desc_read(rxd, 0, &rxd0);
rt2x00_desc_read(rxwi, 0, &rxwi0);
rt2x00_desc_read(rxwi, 1, &rxwi1);
rt2x00_desc_read(rxwi, 2, &rxwi2);
rt2x00_desc_read(rxwi, 3, &rxwi3);
+ rt2x00_desc_read(rxd, 0, &rxd0);
- if (rt2x00_get_field32(rxd0, RXINFO_W0_CRC_ERROR))
+ if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
rxdesc->cipher_status =
- rt2x00_get_field32(rxd0, RXINFO_W0_CIPHER_ERROR);
+ rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
}
- if (rt2x00_get_field32(rxd0, RXINFO_W0_DECRYPTED)) {
+ if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
/*
* Hardware has stripped IV/EIV data from 802.11 frame during
* decryption. Unfortunately the descriptor doesn't contain
@@ -622,10 +638,10 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
rxdesc->flags |= RX_FLAG_MMIC_ERROR;
}
- if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS))
+ if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
- if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD))
+ if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
rxdesc->dev_flags |= RXDONE_L2PAD;
if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 1e4340a..d1d8ae9 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -79,6 +79,8 @@
*/
#define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) )
#define RXINFO_DESC_SIZE ( 1 * sizeof(__le32) )
+#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE ( 1 * sizeof(__le32) )
/*
* TX Info structure
@@ -101,6 +103,54 @@
#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000)
/*
+ * RX Info structure
+ */
+
+/*
+ * Word 0
+ */
+
+#define RXINFO_W0_USB_DMA_RX_PKT_LEN FIELD32(0x0000ffff)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
+#define RXWI_W0_BSSID FIELD32(0x00001c00)
+#define RXWI_W0_UDF FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
+#define RXWI_W0_TID FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
+#define RXWI_W1_MCS FIELD32(0x007f0000)
+#define RXWI_W1_BW FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
+#define RXWI_W1_STBC FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0 FIELD32(0x000000ff)
+#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
+
+/*
* RX descriptor format for RX Ring.
*/
@@ -115,25 +165,25 @@
* AMSDU: rx with 802.3 header, not 802.11 header.
*/
-#define RXINFO_W0_BA FIELD32(0x00000001)
-#define RXINFO_W0_DATA FIELD32(0x00000002)
-#define RXINFO_W0_NULLDATA FIELD32(0x00000004)
-#define RXINFO_W0_FRAG FIELD32(0x00000008)
-#define RXINFO_W0_UNICAST_TO_ME FIELD32(0x00000010)
-#define RXINFO_W0_MULTICAST FIELD32(0x00000020)
-#define RXINFO_W0_BROADCAST FIELD32(0x00000040)
-#define RXINFO_W0_MY_BSS FIELD32(0x00000080)
-#define RXINFO_W0_CRC_ERROR FIELD32(0x00000100)
-#define RXINFO_W0_CIPHER_ERROR FIELD32(0x00000600)
-#define RXINFO_W0_AMSDU FIELD32(0x00000800)
-#define RXINFO_W0_HTC FIELD32(0x00001000)
-#define RXINFO_W0_RSSI FIELD32(0x00002000)
-#define RXINFO_W0_L2PAD FIELD32(0x00004000)
-#define RXINFO_W0_AMPDU FIELD32(0x00008000)
-#define RXINFO_W0_DECRYPTED FIELD32(0x00010000)
-#define RXINFO_W0_PLCP_RSSI FIELD32(0x00020000)
-#define RXINFO_W0_CIPHER_ALG FIELD32(0x00040000)
-#define RXINFO_W0_LAST_AMSDU FIELD32(0x00080000)
-#define RXINFO_W0_PLCP_SIGNAL FIELD32(0xfff00000)
+#define RXD_W0_BA FIELD32(0x00000001)
+#define RXD_W0_DATA FIELD32(0x00000002)
+#define RXD_W0_NULLDATA FIELD32(0x00000004)
+#define RXD_W0_FRAG FIELD32(0x00000008)
+#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010)
+#define RXD_W0_MULTICAST FIELD32(0x00000020)
+#define RXD_W0_BROADCAST FIELD32(0x00000040)
+#define RXD_W0_MY_BSS FIELD32(0x00000080)
+#define RXD_W0_CRC_ERROR FIELD32(0x00000100)
+#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600)
+#define RXD_W0_AMSDU FIELD32(0x00000800)
+#define RXD_W0_HTC FIELD32(0x00001000)
+#define RXD_W0_RSSI FIELD32(0x00002000)
+#define RXD_W0_L2PAD FIELD32(0x00004000)
+#define RXD_W0_AMPDU FIELD32(0x00008000)
+#define RXD_W0_DECRYPTED FIELD32(0x00010000)
+#define RXD_W0_PLCP_RSSI FIELD32(0x00020000)
+#define RXD_W0_CIPHER_ALG FIELD32(0x00040000)
+#define RXD_W0_LAST_AMSDU FIELD32(0x00080000)
+#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000)
#endif /* RT2800USB_H */
--
1.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
