This makes part of init code follow updated specs. Michael said many times he prefers smaller patches posted more frequently. So there this go. However if you think it's too small, just let me know please. From 7892ad10e3e15abc960e9a05c8c372a97b1f6b67 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@xxxxxxxxx> Date: Mon, 4 Jan 2010 21:20:14 +0100 Subject: [PATCH] b43: N-PHY: update part of init code to current specs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- drivers/net/wireless/b43/phy_n.c | 72 +++++++++++++++++++++++++++++++------- drivers/net/wireless/b43/phy_n.h | 12 ++++++ 2 files changed, 71 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 992318a..015da44 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -417,37 +417,70 @@ static void b43_nphy_rssi_cal(struct b43_wldev *dev, u8 type) //TODO } +/* Init N-PHY + * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N + */ int b43_phy_initn(struct b43_wldev *dev) { + struct ssb_bus *bus = dev->dev->bus; struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; u16 tmp; + enum ieee80211_band tmp2; + + u16 clip[2]; + bool do_cal = false; - //TODO: Spectral management + if ((dev->phy.rev >= 3) && + (bus->sprom.boardflags_lo & B43_BFL_EXTLNA) && + (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) { + chipco_set32(&dev->dev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40); + } + nphy->deaf_count = 0; b43_nphy_tables_init(dev); + nphy->crsminpwr_adjusted = false; + nphy->noisevars_adjusted = false; /* Clear all overrides */ - b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + if (dev->phy.rev >= 3) { + b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S1, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, 0); + b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, 0); + } else { + b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0); + } b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, 0); b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, 0); - b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0); - b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0); + if (dev->phy.rev < 6) { + b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0); + b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0); + } b43_phy_mask(dev, B43_NPHY_RFSEQMODE, ~(B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER)); + if (dev->phy.rev >= 3) + b43_phy_write(dev, B43_NPHY_AFECTL_OVER1, 0); b43_phy_write(dev, B43_NPHY_AFECTL_OVER, 0); - tmp = (phy->rev < 2) ? 64 : 59; - b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, - ~B43_NPHY_BPHY_CTL3_SCALE, - tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT); - + if (dev->phy.rev <= 2) { + tmp = (dev->phy.rev == 2) ? 0x3B : 0x40; + b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, + ~B43_NPHY_BPHY_CTL3_SCALE, + tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT); + } b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20); b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20); - b43_phy_write(dev, B43_NPHY_TXREALFD, 184); - b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 200); - b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 80); - b43_phy_write(dev, B43_NPHY_C2_BCLIPBKOFF, 511); + if (bus->sprom.boardflags2_lo & 0x100 || + (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && + bus->boardinfo.type == 0x8B)) + b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0); + else + b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8); + b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 0xC8); + b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 0x50); + b43_phy_write(dev, B43_NPHY_TXRIFS_FRDEL, 0x30); //TODO MIMO-Config //TODO Update TX/RX chain @@ -456,6 +489,19 @@ int b43_phy_initn(struct b43_wldev *dev) b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8); b43_phy_write(dev, B43_NPHY_DUP40_BL, 0x9A4); } + + tmp2 = b43_current_band(dev->wl); + if ((nphy->ipa2g_on && tmp2 == IEEE80211_BAND_2GHZ) || + (nphy->ipa5g_on && tmp2 == IEEE80211_BAND_5GHZ)) { + b43_phy_set(dev, B43_NPHY_PAPD_EN0, 0x1); + //FIXME b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ0, 0x007F, nphy->papd_epsilon_offset[0] << 7); + b43_phy_set(dev, B43_NPHY_PAPD_EN1, 0x1); + //FIXME b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ1, 0x007F, nphy->papd_epsilon_offset[1] << 7); + //TODO N PHY IPA Set TX Dig Filters + } else if (phy->rev >= 5) { + //TODO N PHY Ext PA Set TX Dig Filters + } + b43_nphy_workarounds(dev); b43_nphy_reset_cca(dev); diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h index 1749aef..8f174b7 100644 --- a/drivers/net/wireless/b43/phy_n.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -231,6 +231,7 @@ #define B43_NPHY_C2_TXIQ_COMP_OFF B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */ #define B43_NPHY_C1_TXCTL B43_PHY_N(0x08B) /* Core 1 TX control */ #define B43_NPHY_C2_TXCTL B43_PHY_N(0x08C) /* Core 2 TX control */ +#define B43_NPHY_AFECTL_OVER1 B43_PHY_N(0x08F) /* AFE control override 1 */ #define B43_NPHY_SCRAM_SIGCTL B43_PHY_N(0x090) /* Scram signal control */ #define B43_NPHY_SCRAM_SIGCTL_INITST 0x007F /* Initial state value */ #define B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT 0 @@ -705,6 +706,10 @@ #define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power controll init */ #define B43_NPHY_TXPCTL_INIT_PIDXI1 0x00FF /* Power index init 1 */ #define B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT 0 +#define B43_NPHY_PAPD_EN0 B43_PHY_N(0x297) /* PAPD Enable0 TBD */ +#define B43_NPHY_EPS_TABLE_ADJ0 B43_PHY_N(0x298) /* EPS Table Adj0 TBD */ +#define B43_NPHY_PAPD_EN1 B43_PHY_N(0x29B) /* PAPD Enable1 TBD */ +#define B43_NPHY_EPS_TABLE_ADJ1 B43_PHY_N(0x29C) /* EPS Table Adj1 TBD */ @@ -920,6 +925,13 @@ struct b43_wldev; struct b43_phy_n { + u32 deaf_count; + bool crsminpwr_adjusted; + bool noisevars_adjusted; + + bool ipa2g_on; + bool ipa5g_on; + //TODO lots of missing stuff }; -- 1.6.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
