> Yeah - plus, the chip, according to realtek's website, wants 3.3 and > 1.something V. If they are using a linear regulator for that - there must > be a reason for that low price, after all ... ;-) Hmm they are using at least one switching DC/DC.. On my rtl8187L there is a relatively big inductor and a big, probably schottky, diode on the PCB near to two little ICs (well one is certainly an IC, the other could be even a couple of transistors in a single package.. I don't know). On one of two coil pin the 3.3V is present. So it should be the switching DC/DC for the 3.3. On one of the two ICS (the little one, that i'm not sure what is it really) there is present both 3.3V and 1.8V so it could be the regulator for 1.8V There are a couple of little inductors or ferrite bead in apparently 0803 or similar package but they looks like they are used as filters and I can't see any other diode, so the little ic _might_ be a linear used for 1.8V. Unfortunately I couldn't find the marking code on the net about it.. it is a sot23-5 marked ajp22 Oh And there is another of those ajp22 on another PCB place...I did some measurement on it, but I didn't find anything that convinced me about what is it.. Andrea -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
