From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
I've also for a long time had a problem with the
temperature calculation code, which I had fixed
by byte-swapping the values, and now it turns out
that was the correct fix after all.
Also, any use of iwl_eeprom_query_addr() that is
for more than a u8 must be cast to little endian,
and some structs as well.
Fix all this. Again, no real impact on platforms
that already are little endian.
Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxx
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
This fix is needed in 2.6.32 but does not apply in this form.
A rebased version will be provided after this
patch has been merged into 2.6.33.
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-5000-hw.h | 14 +++++++++-----
drivers/net/wireless/iwlwifi/iwl-5000.c | 7 ++++---
drivers/net/wireless/iwlwifi/iwl-eeprom.h | 4 ++--
4 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 386513b..484c5fd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -1204,7 +1204,7 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
/* calculate tx gain adjustment based on power supply voltage */
- voltage = priv->calib_info->voltage;
+ voltage = le16_to_cpu(priv->calib_info->voltage);
init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
voltage_compensation =
iwl4965_get_voltage_compensation(voltage, init_voltage);
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
index 4ef6804..bc056e9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-5000-hw.h
@@ -92,11 +92,15 @@
static inline s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
{
- u16 *temp_calib = (u16 *)iwl_eeprom_query_addr(priv,
- EEPROM_5000_TEMPERATURE);
- /* offset = temperature - voltage / coef */
- s32 offset = (s32)(temp_calib[0] - temp_calib[1] / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
- return offset;
+ u16 temperature, voltage;
+ __le16 *temp_calib =
+ (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_TEMPERATURE);
+
+ temperature = le16_to_cpu(temp_calib[0]);
+ voltage = le16_to_cpu(temp_calib[1]);
+
+ /* offset = temp - volt / coeff */
+ return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
}
/* Fixed (non-configurable) rx data from phy */
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index e2f8615..33a5866 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -333,14 +333,15 @@ static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
static int iwl5000_set_Xtal_calib(struct iwl_priv *priv)
{
struct iwl_calib_xtal_freq_cmd cmd;
- u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
+ __le16 *xtal_calib =
+ (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
cmd.hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD;
cmd.hdr.first_group = 0;
cmd.hdr.groups_num = 1;
cmd.hdr.data_valid = 1;
- cmd.cap_pin1 = (u8)xtal_calib[0];
- cmd.cap_pin2 = (u8)xtal_calib[1];
+ cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
+ cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL],
(u8 *)&cmd, sizeof(cmd));
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 5cd2b66..0cd9c02 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -137,7 +137,7 @@ struct iwl_eeprom_channel {
*
*/
struct iwl_eeprom_enhanced_txpwr {
- u16 common;
+ __le16 common;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
@@ -360,7 +360,7 @@ struct iwl_eeprom_calib_subband_info {
struct iwl_eeprom_calib_info {
u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
u8 saturation_power52; /* half-dBm */
- s16 voltage; /* signed */
+ __le16 voltage; /* signed */
struct iwl_eeprom_calib_subband_info
band_info[EEPROM_TX_POWER_BANDS];
} __attribute__ ((packed));
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
