Dan Williams wrote:
On Fri, 2009-12-04 at 10:56 -0600, Greg Oliver wrote:
On Fri, Dec 4, 2009 at 10:08 AM, David Acker <dacker@xxxxxxxxxx> wrote:
Kalle Valo wrote:
David Acker <dacker@xxxxxxxxxx> writes:
What do think of also supporting a method 4, VLAN priority field (0-7)?
Sorry, I haven't heard about this. I don't even know how applications
should set this. Can you show an example, please?
Sure. A system could be setup with multiple VLANs available on its outgoing
port. Imagine eth0.1, eth0.2 and eth0.7. Each one is a different VLAN with
a different priority mapping setup. The application can use the high
priority VLAN which should then be reflected in the over the air packets
using a high priority WMM queue. If the driver implements the appropriate
VLAN functionality it should be able to detect VLAN tagged packets and pick
the appropriate WMM hardware queue. I think a driver can use vlan_get_tag
to get the Tag Control Information (TCI) field. The TCI field contains a
3-bit Priority Code Point (PCP) field for 8 different priorities.
I am not an expert on how the kernel handles vlans, but it appears that the
priority field's value is set by the user space VLAN creation tools through
an ioctl with SET_VLAN_EGRESS_PRIORITY_CMD which calls
vlan_dev_set_egress_priority to map an skb priority to a vlan priority.
vlan_dev_hard_header then uses this information to populate the vlan
priority field based on the skb priority field.
In this case it would seem that skb priority and the vlan priority are both
set and there may be a non-trivial mapping between the two. pkt_sched.h
defines some skb priorities but also leaves many undefined. The
skb->priority is also larger then the vlan priority. If both are set, which
will take precedence?
-ack
I do nto mean to be negative, but how can vlan based priority mapping
be anything but "going in reverse" by today's QoS standards? The
whole point of packet marking is to alleviate the "this port is better
than that port", so traffic from any port can be made equal to that of
another.. Port (vlan/subnet/interface, etc) agnostic... This would
seem like a regression to me... All of the major router/switch
vendors provide mappings between these techniques already for this
reason. Hopefully, they will not be needed much longer.
Also, I think that unless it's a simple as a setsockopt() or some
one-call method like that, app writers aren't really going to use it.
For something as conceptually simple as QoS (even if the implementation
is complex), as an app writer I'd want to say "this packet is priority
3" and not "this packet is priority 4, so I need to find the
corresponding VLAN, and if that's not set up for me already then fail".
On the other hand, an administrator could create a high priority VLAN/IP
subnet and setup the mapping so that the default skb priority goes to a
high priority vlan. The applications using this don't have to change at
all.
Minimally, I think that Linux wireless needs to define what priority
related fields it uses to drive WMM. It is fine to ignore the VLAN
priority as long as it is documented. Going with the skb priority
sounds like a good plan since it is used to drive the VLAN priority anyway.
Going with IPv4 DSCP may be a bit problematic. See
http://marc.info/?l=linux-netdev&m=125875775229644&w=2 and
http://sourceware.org/bugzilla/show_bug.cgi?id=10789 .
-ack
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
