Currently, the 2GHz band is enabled unconditionally, even if the device
does not support it.
Changes-licensed-under: ISC
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/main.c | 26 ++++++++++++++++----------
1 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index cbf5d2a..c0daef0 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1826,12 +1826,14 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
/* setup channels and rates */
- sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
- sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
- sc->rates[IEEE80211_BAND_2GHZ];
- sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
- sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
- ARRAY_SIZE(ath9k_2ghz_chantable);
+ if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
+ sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+ sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
+ sc->rates[IEEE80211_BAND_2GHZ];
+ sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+ sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
+ ARRAY_SIZE(ath9k_2ghz_chantable);
+ }
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
@@ -1906,8 +1908,9 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->rate_control_algorithm = "ath9k_rate_control";
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &sc->sbands[IEEE80211_BAND_2GHZ];
+ if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &sc->sbands[IEEE80211_BAND_2GHZ];
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&sc->sbands[IEEE80211_BAND_5GHZ];
@@ -1946,9 +1949,12 @@ int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
reg = &common->regulatory;
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
- setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+ if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
+ setup_ht_cap(sc,
+ &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
- setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+ setup_ht_cap(sc,
+ &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
}
/* initialize tx/rx engine */
--
1.5.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
