Thanks Luis, I have checked it in. Do these scripts (client and AP) run on the same machine? If yes, will packets be sent/received through air, or through mac80211 as bridge? I have a sample case with hwsim (hwsim.sh), which simulates two wlan interface (one for client and one for hostapd). It can be used for testing mac80211. Bests Jeff >-----Original Message----- >From: Luis R. Rodriguez [mailto:mcgrof@xxxxxxxxxxxxx] On >Behalf Of Luis R. Rodriguez >Sent: 2009年11月12日 9:36 >To: Zheng, Jeff >Cc: Wifi-test-devel@xxxxxxxxxxxxxxxxxxxxx; >linux-wireless@xxxxxxxxxxxxxxx; Luis R. Rodriguez >Subject: [PATCH] wifi-test: add initial simple test scripts > >The wifi-test project currently deals only with a robust >test setup and requires access to an AP with a CLI like >the Cisco APs. For simpler environments such as an end >user we can work on simpler scripts and tests cases. > >Lets start this off with some initial basic scripts to >start an AP with different encryption possible settings >and a client to connect to that AP. To start off with >we use wext as that has been tested previously. We'll >replace this with iw commands ASAP. > >Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> >--- > >I'm submitting these as-is from some old stuff I had which I had >tested with MadWifi. Eventually I'll test with ath9k and 11n, etc. >Feel free to send patches :) > > README | 14 +++ > simple/README | 15 +++ > simple/create-ap.sh.txt | 199 >+++++++++++++++++++++++++++++++++++++++++++ > simple/create-client.sh.txt | 153 +++++++++++++++++++++++++++++++++ > 4 files changed, 381 insertions(+), 0 deletions(-) > create mode 100644 simple/README > create mode 100755 simple/create-ap.sh.txt > create mode 100755 simple/create-client.sh.txt > >diff --git a/README b/README >index 491597a..eb88832 100644 >--- a/README >+++ b/README >@@ -1,4 +1,18 @@ > >+Type of testing >+=============== >+ >+ * Robust testing environment with CLI AP >+ >+This project is designed originally for using APs which you can >+configure yourself manually through some sort of CLI like the >Cisco APs. >+ >+ * Simple testing >+ >+Simple testing utilities are only starting to being >developed, for those >+refer to the simple/ directory. The rest of this document >covers testing >+with robust environment and an AP with a CLI. >+ > ***************************************** > ** Testing environment ** > ***************************************** >diff --git a/simple/README b/simple/README >new file mode 100644 >index 0000000..cd65290 >--- /dev/null >+++ b/simple/README >@@ -0,0 +1,15 @@ >+Simple Linux wirelss testing utilities >+====================================== >+ >+Use these if you don't have a complex testing environment, like >+only one AP you run yourself with hostapd and a client which you >+control as well. >+ >+This doesn't yet collect information from connection establishment. >+ >+TODO: >+ >+ * Use iw commands >+ >+ * Write nl80211 client which lisents to multicast events >+ to figure out connection completions/etc >diff --git a/simple/create-ap.sh.txt b/simple/create-ap.sh.txt >new file mode 100755 >index 0000000..e4081a5 >--- /dev/null >+++ b/simple/create-ap.sh.txt >@@ -0,0 +1,199 @@ >+#!/bin/bash >+# >+# Copyright (c) 2008 Luis R. Rodriguez <mcgrof@xxxxxxxxxxxxxxxxxx> >+# >+# Linuxwireless.org generic AP setup utility >+# >+# Use this script setup an AP to tests drivers in STA mode against >+# generic AP modes. This script was designed to support all current >+# Linux wireless drivers which support AP mode but was tested >mainly with >+# MadWifi >+# >+# Requirements: >+# >+# * hostapd >+# * wireless-tools >+# * Wireless card and a respective Linux wireless driver >which supports AP mode >+# >+#### Configurable items >+ESSID="linuxwireless.org-testap01" >+DEV="ath2" >+# Used for WEP and TKIP and CCMP PSK passphrase >+WEPKEY1="linuxwireless" >+MODULE="ath_pci" >+HOSTAPD_TKIP="/tmp/hostapd.conf.tkip" >+HOSTAPD_CCMP="/tmp/hostapd.conf.ccmp" >+#### You should not need to edit anything else bellow >+ >+function generic-ap-setup() { >+ echo "Removing module $DRIVER..." >+ rmmod $MODULE >+ echo "Adding module $DRIVER..." >+ modprobe $MODULE >+ # Some drivers in AP mode will need this >+ echo "Letting module breathe for a bit..." >+ sleep 2 >+ case "$MODULE" in >+ ath_pci) >+ wlanconfig $DEV destroy >+ wlanconfig $DEV create wlandev wifi0 wlanmode ap >+ ;; >+ *) >+ iwconfig $DEV mode master >+ ;; >+ esac >+ iwconfig $DEV essid $ESSID >+} >+ >+function generate-hostapd() { >+ if [[ $# -ne 2 ]]; then >+ echo "Not enough arguments for generate-hostapd()" >+ usage >+ exit >+ fi >+ >+ case "$1" in >+ TKIP) >+ PAIRWISE_ALG="TKIP"; >+ ;; >+ CCMP) >+ PAIRWISE_ALG="CCMP"; >+ ;; >+ *) >+ echo -e "Unsupported hostapd pairwise algorythm: $1" >+ exit >+ ;; >+ esac >+ DRIVER="hostap" >+ case "$MODULE" in >+ ath_pci) >+ DRIVER="madwifi" >+ ;; >+ # Other hostapd drivers are hostap, wired, and >prism54, all these match >+ # ther respective module name >+ *) >+ DRIVER="$MODULE" >+ ;; >+ esac >+ echo " >+interface=$DEV >+driver=$DRIVER >+logger_syslog=-1 >+logger_syslog_level=2 >+logger_stdout=-1 >+logger_stdout_level=2 >+debug=0 >+dump_file=/tmp/hostapd.dump >+ctrl_interface=/var/run/hostapd >+ctrl_interface_group=0 >+ssid=$ESSID >+max_num_sta=255 >+macaddr_acl=0 >+auth_algs=3 >+wme_enabled=1 >+wme_ac_bk_cwmin=4 >+wme_ac_bk_cwmax=10 >+wme_ac_bk_aifs=7 >+wme_ac_bk_txop_limit=0 >+wme_ac_bk_acm=0 >+wme_ac_be_aifs=3 >+wme_ac_be_cwmin=4 >+wme_ac_be_cwmax=10 >+wme_ac_be_txop_limit=0 >+wme_ac_be_acm=0 >+wme_ac_vi_aifs=2 >+wme_ac_vi_cwmin=3 >+wme_ac_vi_cwmax=4 >+wme_ac_vi_txop_limit=94 >+wme_ac_vi_acm=0 >+wme_ac_vo_aifs=2 >+wme_ac_vo_cwmin=2 >+wme_ac_vo_cwmax=3 >+wme_ac_vo_txop_limit=47 >+wme_ac_vo_acm=0 >+eapol_key_index_workaround=0 >+eap_server=0 >+own_ip_addr=127.0.0.1 >+wpa=2 >+wpa_passphrase=$WEPKEY1 >+wpa_key_mgmt=WPA-PSK >+wpa_pairwise=$PAIRWISE_ALG >+" > $2 >+} >+ >+function mode-ap() { >+ echo "Setting up AP..." >+ generic-ap-setup >+ ifconfig $DEV up >+ echo "AP setup complete" >+} >+ >+function mode-ap-wep() { >+ echo "Setting up AP in AP-WEP mode..." >+ generic-ap-setup >+ iwconfig $DEV key s:$WEPKEY1 >+ ifconfig $DEV up >+ echo "AP setup complete" >+} >+ >+function mode-ap-wpa() { >+ if [[ $# -ne 1 ]]; then >+ echo "Not enough arguments for mode-ap-wpa()" >+ usage >+ exit >+ fi >+ >+ case "$1" in >+ TKIP) >+ PAIRWISE_ALG="TKIP" >+ HOSTAPD_CONF="$HOSTAPD_TKIP" >+ ;; >+ CCMP) >+ PAIRWISE_ALG="CCMP" >+ HOSTAPD_CONF="$HOSTAPD_CCMP" >+ ;; >+ *) >+ echo -e "Unsupported hostapd pairwise algorithm: $1" >+ exit; >+ ;; >+ esac >+ echo "Setting up AP in AP-$PAIRWISE_ALG mode..." >+ generic-ap-setup >+ ifconfig $DEV up >+ generate-hostapd $PAIRWISE_ALG $HOSTAPD_CONF >+ hostapd $HOSTAPD_CONF >+ echo "AP setup complete" >+} >+ >+function usage() { >+ echo -e "Usage: $0 AP-Mode" >+ echo -e "AP-Modes available:" >+ echo -e "\tAP\tNo encryption" >+ echo -e "\tAP-WEP\tWEP encryption" >+ echo -e "\tAP-TKIP\tTKIP encryption" >+ echo -e "\tAP-CCMP\tCCMP encryption" >+} >+ >+if [[ $# -ne 1 ]]; then >+ usage >+ exit >+fi >+ >+case "$1" in >+ AP) >+ mode-ap; >+ ;; >+ AP-WEP) >+ mode-ap-wep; >+ ;; >+ AP-TKIP) >+ mode-ap-wpa TKIP; >+ ;; >+ AP-CCMP) >+ mode-ap-wpa CCMP; >+ ;; >+ *) >+ echo -e "Unsupported AP mode: $1" >+ usage; >+ ;; >+esac >diff --git a/simple/create-client.sh.txt b/simple/create-client.sh.txt >new file mode 100755 >index 0000000..2c99072 >--- /dev/null >+++ b/simple/create-client.sh.txt >@@ -0,0 +1,153 @@ >+#!/bin/bash >+# >+# Copyright (c) 2008 Luis R. Rodriguez <mcgrof@xxxxxxxxxxxxxxxxxx> >+# >+# Linuxwireless.org generic STA test utility >+# >+# Use this script to test Linux wireless drivers >+# which require to associate to an access point. >+# >+#### Configurable items >+ESSID="linuxwireless.org-testap01" >+DEV="ath2" >+# Used for WEP and TKIP and CCMP PSK passphrase >+WEPKEY1="linuxwireless" >+MODULE="ath_pci" >+WPASUPPLICANT_TKIP="/tmp/wpasupplicant.conf.tkip" >+WPASUPPLICANT_CCMP="/tmp/wpasupplicant.conf.ccmp" >+#### You should not need to edit anything else bellow >+ >+function generic-sta-setup() { >+ echo "Removing module $MODULE..." >+ rmmod $MODULE >+ echo "Adding module $MODULE..." >+ modprobe $MODULE >+ # Some drivers in AP mode will need this >+ echo "Letting module breathe for a bit..." >+ sleep 2 >+ iwconfig $DEV mode Managed >+ iwconfig $DEV essid $ESSID >+} >+ >+function generate-wpasupplicant() { >+ if [[ $# -ne 2 ]]; then >+ echo "Not enough arguments for generate-wpasupplicant()" >+ usage >+ exit >+ fi >+ >+ case "$1" in >+ TKIP) >+ PAIRWISE_ALG="TKIP"; >+ GROUPWISE_ALG="TKIP"; >+ ;; >+ CCMP) >+ PAIRWISE_ALG="CCMP"; >+ GROUPWISE_ALG="CCMP"; >+ ;; >+ *) >+ echo -e "Unsupported hostapd pairwise algorythm: $1" >+ exit >+ ;; >+ esac >+ >+ echo " >+#ctrl_interface=/var/run/wpa_supplicant >+ctrl_interface_group=wheel >+network={ >+ ssid=\"$ESSID\" >+ scan_ssid=1 >+ key_mgmt=WPA-PSK >+ pairwise=$PAIRWISE_ALG >+ group=$GROUPWISE_ALG >+ psk=\"$WEPKEY1\" >+} >+" > $2 >+} >+ >+function mode-sta() { >+ echo "Setting up STA..." >+ generic-sta-setup >+ ifconfig $DEV up >+ echo "STA setup complete" >+} >+ >+function mode-sta-wep() { >+ echo "Setting up AP in AP-WEP mode..." >+ generic-sta-setup >+ iwconfig $DEV key s:$WEPKEY1 >+ ifconfig $DEV up >+ echo "STA setup complete" >+} >+ >+function mode-sta-wpa() { >+ if [[ $# -ne 1 ]]; then >+ echo "Not enough arguments for mode-sta-wpa()" >+ usage >+ exit >+ fi >+ >+ case "$1" in >+ TKIP) >+ PAIRWISE_ALG="TKIP" >+ WPASUPPLICANT_CONF="$WPASUPPLICANT_TKIP" >+ ;; >+ CCMP) >+ PAIRWISE_ALG="CCMP" >+ WPASUPPLICANT_CONF="$WPASUPPLICANT_CCMP" >+ ;; >+ *) >+ echo -e "Unsupported wpasupplicant pairwise >algorithm: $1" >+ exit >+ ;; >+ esac >+ DRIVER="wext" >+ case "$MODULE" in >+ ath_pci) >+ DRIVER="madwifi" >+ ;; >+ # Drivers should now support wext >+ *) >+ DRIVER="wext" >+ ;; >+ esac >+ echo "Setting up STA in STA-$PAIRWISE_ALG mode..." >+ generic-sta-setup >+ ifconfig $DEV up >+ generate-wpasupplicant $PAIRWISE_ALG $WPASUPPLICANT_CONF >+ wpa_supplicant -D${DRIVER} -i${DEV} -c $WPASUPPLICANT_CONF >+ echo "STA setup complete" >+} >+ >+function usage() { >+ echo -e "Usage: $0 STA-Mode" >+ echo -e "STA-Modes available:" >+ echo -e "\tSTA\tNo encryption" >+ echo -e "\tSTA-WEP\tWEP encryption" >+ echo -e "\tSTA-TKIP\tTKIP encryption" >+ echo -e "\tSTA-CCMP\tCCMP encryption" >+} >+ >+if [[ $# -ne 1 ]]; then >+ usage >+ exit >+fi >+ >+case "$1" in >+ STA) >+ mode-sta; >+ ;; >+ STA-WEP) >+ mode-sta-wep; >+ ;; >+ STA-TKIP) >+ mode-sta-wpa TKIP; >+ ;; >+ STA-CCMP) >+ mode-sta-wpa CCMP; >+ ;; >+ *) >+ echo -e "Unsupported STA mode: $1" >+ usage; >+ ;; >+esac >-- >1.6.5.2.155.gbb47 > >-- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
