The first set of patches are the virtual wiphy updates which I had sent out as RFTs, I've not tested them. The others are changes to ath9k to add a new module ath9k_common to be shared between ath9k and ath9k_htc. For now it only has some common RX helpers but will grow as I see more and more being shared. I've tested these changes with ath5k, ath9k and ar9170 on the ath9k_htc driver. ath9k_htc now scans with this common shared code. If you'd like the all in one patch you can grab it from here: http://bombadil.infradead.org/~mcgrof/patches/ath/2009/11/all-pending-2009-11-07.patch The ath9k_htc git tree has a branch called rx-rework which you can check out and use if you apply the patch above. Next on the agenda will be to add some initial TX support to ath9k_htc. More common stuff will be moved into ath9k_common as we move along. Luis R. Rodriguez (29): ath9k: fix listening to idle requests ath9k: update hw configuration for virtual wiphys ath9k: simpify RX by calling ath_get_virt_hw() once ath9k: use the passed ieee80211_hw on ath_rx_prepare() ath9k: pass the ieee80211_hw on radio enable/disable ath9k: use correct hw for tx aggregation TX completion ath9k: use the right hw on ath_tx_setup_buffer() for HT ath9k: handle low buffer space for virtual wiphys ath9k: do not pass the entire descriptor to ath_rx_prepare() ath9k_hw: move ath_extend_tsf() to hw code to share as ath9k_hw_extend_tsf() ath9k: move struct ath_ani to common area ath9k: use the ieee80211_hw to get to an sband on ath_rx_prepare() ath9k: move RX check code into helper ath9k_rx_accept() ath9k: remove temp variable ratecode from ath_rx_prepare() ath9k: move rate descriptor reading into a helper ath9k: move qual processing into a helper ath9k: move rssi processing into a helper ath9k: avoid the copy skb->cb on every RX'd skb ath9k: move the rx_stats->rs_datalen check to ath9k_rx_accept() ath: move the rx bufsize to common to share with ath5k/ath9k ath5k: remove double cache alignment, ath_rxbuf_alloc() already does it ath9k: move the max rx buffer size check to ath9k_rx_accept() ath9k: rename ath_rx_prepare() to ath9k_rx_skb_preprocess() ath9k: move driver keymap, keymax and splitmic to common ath5k: use the common->keymap ath9k: move RX skb post processing to a helper ath9k_common: add new module to share 802.11n driver helpers ath9k_common: remove ath9k_compute_qual() ath9k_common: clarify and correct jumbogram processing drivers/net/wireless/ath/ath.h | 28 +++ drivers/net/wireless/ath/ath5k/base.c | 32 ++- drivers/net/wireless/ath/ath5k/base.h | 2 - drivers/net/wireless/ath/ath9k/Kconfig | 3 + drivers/net/wireless/ath/ath9k/Makefile | 3 + drivers/net/wireless/ath/ath9k/ath9k.h | 130 ++----------- drivers/net/wireless/ath/ath9k/common.c | 285 +++++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/common.h | 123 ++++++++++++ drivers/net/wireless/ath/ath9k/hw.c | 15 ++ drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/main.c | 243 +++++++++++++----------- drivers/net/wireless/ath/ath9k/rc.h | 2 + drivers/net/wireless/ath/ath9k/recv.c | 313 +++++------------------------- drivers/net/wireless/ath/ath9k/virtual.c | 79 +++++++- drivers/net/wireless/ath/ath9k/xmit.c | 19 ++- 15 files changed, 766 insertions(+), 512 deletions(-) create mode 100644 drivers/net/wireless/ath/ath9k/common.c create mode 100644 drivers/net/wireless/ath/ath9k/common.h -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
