Don't know if I did it right, let me know if there is anything else you need. Here is kern.log (I added CONFIG_B43_DEBUG to config.mk, also, I am running compat-wireless-2009-11-07 -- I also tried most recent wireless-testing, however, with the same result): Nov 7 15:01:30 lateralus kernel: [ 101.013386] cfg80211: Calling CRDA to update world regulatory domain Nov 7 15:01:30 lateralus kernel: [ 101.117855] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Nov 7 15:01:30 lateralus kernel: [ 101.117878] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64 Nov 7 15:01:30 lateralus kernel: [ 101.184603] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0 Nov 7 15:01:30 lateralus kernel: [ 101.222674] cfg80211: World regulatory domain updated: Nov 7 15:01:30 lateralus kernel: [ 101.222683] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 7 15:01:30 lateralus kernel: [ 101.222691] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 7 15:01:30 lateralus kernel: [ 101.222697] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 7 15:01:30 lateralus kernel: [ 101.222704] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 7 15:01:30 lateralus kernel: [ 101.222710] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 7 15:01:30 lateralus kernel: [ 101.222716] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 7 15:01:30 lateralus kernel: [ 101.237106] b43-phy0: Broadcom 4312 WLAN found (core revision 15) Nov 7 15:01:30 lateralus kernel: [ 101.331600] phy0: Selected rate control algorithm 'minstrel' Nov 7 15:01:30 lateralus kernel: [ 101.332296] Registered led device: b43-phy0::tx Nov 7 15:01:30 lateralus kernel: [ 101.332309] Registered led device: b43-phy0::rx Nov 7 15:01:30 lateralus kernel: [ 101.332322] Registered led device: b43-phy0::radio Nov 7 15:01:30 lateralus kernel: [ 101.332368] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] Nov 7 15:01:30 lateralus kernel: [ 101.424508] b43 ssb0:0: firmware: requesting b43/ucode15.fw Nov 7 15:01:31 lateralus kernel: [ 101.657129] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw Nov 7 15:01:31 lateralus kernel: [ 101.667660] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw Nov 7 15:01:31 lateralus kernel: [ 101.820518] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) Nov 7 15:01:37 lateralus kernel: [ 107.761441] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 Nov 7 15:01:37 lateralus kernel: [ 107.761457] b43-phy0: Controller RESET (DMA error) ... Nov 7 15:01:37 lateralus kernel: [ 107.992539] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) Nov 7 15:01:42 lateralus kernel: [ 113.617348] b43-phy0: Controller restarted On Mon, Nov 2, 2009 at 3:22 PM, Michael Buesch <mb@xxxxxxxxx> wrote: > Can we have a full kernel log with b43 debugging enabled, please? (CONFIG_B43_DEBUG) > > -- > Greetings, Michael. > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
