[ 1591.626628] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. [ 1591.626636] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. [ 1591.626644] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. [ 1591.626652] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. [ 1656.653960] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. [ 1656.653963] Please file bug report to http://rt2x00.serialmonkey.com Near the bottom... Is that message correct? The bug reports link at the wiki seems a bit unclear... John On Wed, Nov 04, 2009 at 07:00:54PM +0100, Tim Blechmann wrote: > > running the rt61pci module on 2.6.31.5 works fine, but using the recent > > linus/master (2.6.32-rc5) results in this: > > same issue with 2.6.32-rc5 ... new bootlog with more debugging info > attached ... > > tim > > -- > tim@xxxxxxxxxx > http://tim.klingt.org > > Life is really simple, but we insist on making it complicated. > Confucius > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32-rc6 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #36 SMP PREEMPT Wed Nov 4 01:03:33 CET 2009 > [ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro splash vga=769 > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable) > [ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable) > [ 0.000000] DMI 2.5 present. > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-E3FFF write-protect > [ 0.000000] E4000-EBFFF write-through > [ 0.000000] EC000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask E00000000 write-back > [ 0.000000] 1 base 200000000 mask F00000000 write-back > [ 0.000000] 2 base 300000000 mask FC0000000 write-back > [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable > [ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable > [ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) > [ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000 > [ 0.000000] Scanning 0 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) > [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable) > [ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data) > [ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS) > [ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved) > [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable) > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000 > [ 0.000000] 0000000000 - 00bf600000 page 2M > [ 0.000000] 00bf600000 - 00bf680000 page 4k > [ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000 > [ 0.000000] 0100000000 - 0340000000 page 2M > [ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000 > [ 0.000000] RAMDISK: 37868000 - 37fef45a > [ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM) > [ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097) > [ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097) > [ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113) > [ 0.000000] ACPI: FACS 00000000bf698000 00040 > [ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097) > [ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097) > [ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097) > [ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097) > [ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097) > [ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > [ 0.000000] #2 [0001000000 - 00019a6d44] TEXT DATA BSS ==> [0001000000 - 00019a6d44] > [ 0.000000] #3 [0037868000 - 0037fef45a] RAMDISK ==> [0037868000 - 0037fef45a] > [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] > [ 0.000000] #5 [00019a7000 - 00019a7288] BRK ==> [00019a7000 - 00019a7288] > [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] > [ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000] > [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 > [ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880028600000-ffff880032dfffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00340000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x000bf680 > [ 0.000000] 0: 0x00100000 -> 0x00340000 > [ 0.000000] On node 0 totalpages: 3143183 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 111 pages reserved > [ 0.000000] DMA zone: 3816 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 765624 pages, LIFO batch:31 > [ 0.000000] Normal zone: 32256 pages used for memmap > [ 0.000000] Normal zone: 2327040 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) > [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 > [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 > [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 48 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 > [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000 > [ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000 > [ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000 > [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 > [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 > [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90200 r8192 d24488 u262144 > [ 0.000000] pcpu-alloc: s90200 r8192 d24488 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096480 > [ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro splash vga=769 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) > [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 > [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 > [ 0.000000] Memory: 12290392k/13631488k available (5351k kernel code, 1058756k absent, 281452k reserved, 2986k data, 540k init) > [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:512 > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] allocated 125829120 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups > [ 0.000000] hpet clockevent registered > [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer > [ 0.000000] Fast TSC calibration using PIT > [ 0.010000] Detected 2672.606 MHz processor. > [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.21 BogoMIPS (lpj=26726060) > [ 0.000121] Security Framework initialized > [ 0.000174] SELinux: Disabled at boot. > [ 0.000229] Mount-cache hash table entries: 256 > [ 0.000356] Initializing cgroup subsys ns > [ 0.000408] Initializing cgroup subsys cpuacct > [ 0.000462] Initializing cgroup subsys memory > [ 0.000515] Initializing cgroup subsys freezer > [ 0.000578] CPU: Physical Processor ID: 0 > [ 0.000630] CPU: Processor Core ID: 0 > [ 0.000682] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.000765] CPU: L2 cache: 256K > [ 0.000814] CPU: L3 cache: 8192K > [ 0.000865] using mwait in idle threads. > [ 0.000916] Performance Events: Nehalem/Corei7 events, Intel PMU driver. > [ 0.001035] ... version: 3 > [ 0.001086] ... bit width: 48 > [ 0.001136] ... generic registers: 4 > [ 0.001187] ... value mask: 0000ffffffffffff > [ 0.001240] ... max period: 000000007fffffff > [ 0.001293] ... fixed-purpose events: 3 > [ 0.001344] ... event mask: 000000070000000f > [ 0.002090] ACPI: Core revision 20090903 > [ 0.038176] Setting APIC routing to flat > [ 0.038676] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.138701] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 0.308525] Booting processor 1 APIC 0x2 ip 0x6000 > [ 0.318842] Initializing CPU#1 > [ 0.467616] Calibrating delay using timer specific routine.. 5317.40 BogoMIPS (lpj=26587025) > [ 0.467624] CPU: Physical Processor ID: 0 > [ 0.467625] CPU: Processor Core ID: 1 > [ 0.467627] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.467628] CPU: L2 cache: 256K > [ 0.467629] CPU: L3 cache: 8192K > [ 0.467663] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 0.468895] Skipping synchronization checks as TSC is reliable. > [ 0.497467] Booting processor 2 APIC 0x4 ip 0x6000 > [ 0.507879] Initializing CPU#2 > [ 0.656557] Calibrating delay using timer specific routine.. 5317.41 BogoMIPS (lpj=26587054) > [ 0.656563] CPU: Physical Processor ID: 0 > [ 0.656564] CPU: Processor Core ID: 2 > [ 0.656566] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.656567] CPU: L2 cache: 256K > [ 0.656568] CPU: L3 cache: 8192K > [ 0.656578] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 0.686417] Booting processor 3 APIC 0x6 ip 0x6000 > [ 0.696730] Initializing CPU#3 > [ 0.845503] Calibrating delay using timer specific routine.. 5317.40 BogoMIPS (lpj=26587036) > [ 0.845509] CPU: Physical Processor ID: 0 > [ 0.845510] CPU: Processor Core ID: 3 > [ 0.845512] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.845514] CPU: L2 cache: 256K > [ 0.845514] CPU: L3 cache: 8192K > [ 0.845530] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 0.875358] Booting processor 4 APIC 0x1 ip 0x6000 > [ 0.885771] Initializing CPU#4 > [ 1.034447] Calibrating delay using timer specific routine.. 5317.41 BogoMIPS (lpj=26587077) > [ 1.034456] CPU: Physical Processor ID: 0 > [ 1.034457] CPU: Processor Core ID: 0 > [ 1.034460] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 1.034462] CPU: L2 cache: 256K > [ 1.034463] CPU: L3 cache: 8192K > [ 1.034550] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 1.064298] Booting processor 5 APIC 0x3 ip 0x6000 > [ 1.074612] Initializing CPU#5 > [ 1.223389] Calibrating delay using timer specific routine.. 5317.27 BogoMIPS (lpj=26586378) > [ 1.223396] CPU: Physical Processor ID: 0 > [ 1.223397] CPU: Processor Core ID: 1 > [ 1.223399] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 1.223400] CPU: L2 cache: 256K > [ 1.223401] CPU: L3 cache: 8192K > [ 1.223404] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 1.253242] Booting processor 6 APIC 0x5 ip 0x6000 > [ 1.263656] Initializing CPU#6 > [ 1.412330] Calibrating delay using timer specific routine.. 5317.41 BogoMIPS (lpj=26587050) > [ 1.412336] CPU: Physical Processor ID: 0 > [ 1.412337] CPU: Processor Core ID: 2 > [ 1.412339] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 1.412341] CPU: L2 cache: 256K > [ 1.412341] CPU: L3 cache: 8192K > [ 1.412355] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 1.442215] Booting processor 7 APIC 0x7 ip 0x6000 > [ 1.452531] Initializing CPU#7 > [ 1.601277] Calibrating delay using timer specific routine.. 5317.40 BogoMIPS (lpj=26587018) > [ 1.601283] CPU: Physical Processor ID: 0 > [ 1.601284] CPU: Processor Core ID: 3 > [ 1.601286] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 1.601287] CPU: L2 cache: 256K > [ 1.601288] CPU: L3 cache: 8192K > [ 1.601346] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 > [ 1.601848] Brought up 8 CPUs > [ 1.601898] Total of 8 processors activated (42566.93 BogoMIPS). > [ 1.605179] CPU0 attaching sched-domain: > [ 1.605182] domain 0: span 0,4 level SIBLING > [ 1.605184] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) > [ 1.605187] domain 1: span 0-7 level MC > [ 1.605189] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 1.605196] CPU1 attaching sched-domain: > [ 1.605198] domain 0: span 1,5 level SIBLING > [ 1.605199] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) > [ 1.605202] domain 1: span 0-7 level MC > [ 1.605204] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 1.605210] CPU2 attaching sched-domain: > [ 1.605211] domain 0: span 2,6 level SIBLING > [ 1.605212] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) > [ 1.605216] domain 1: span 0-7 level MC > [ 1.605217] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 1.605223] CPU3 attaching sched-domain: > [ 1.605224] domain 0: span 3,7 level SIBLING > [ 1.605226] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) > [ 1.605229] domain 1: span 0-7 level MC > [ 1.605231] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 1.605236] CPU4 attaching sched-domain: > [ 1.605238] domain 0: span 0,4 level SIBLING > [ 1.605239] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) > [ 1.605242] domain 1: span 0-7 level MC > [ 1.605244] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 1.605250] CPU5 attaching sched-domain: > [ 1.605251] domain 0: span 1,5 level SIBLING > [ 1.605252] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) > [ 1.605256] domain 1: span 0-7 level MC > [ 1.605257] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 1.605263] CPU6 attaching sched-domain: > [ 1.605264] domain 0: span 2,6 level SIBLING > [ 1.605266] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) > [ 1.605269] domain 1: span 0-7 level MC > [ 1.605270] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 1.605276] CPU7 attaching sched-domain: > [ 1.605278] domain 0: span 3,7 level SIBLING > [ 1.605279] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) > [ 1.605282] domain 1: span 0-7 level MC > [ 1.605284] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 1.605756] regulator: core version 0.5 > [ 1.605829] Time: 17:10:51 Date: 11/04/09 > [ 1.605908] NET: Registered protocol family 16 > [ 1.606032] ACPI: bus type pci registered > [ 1.606129] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [ 1.606186] PCI: Not using MMCONFIG. > [ 1.606236] PCI: Using configuration type 1 for base access > [ 1.606874] bio: create slab <bio-0> at 0 > [ 1.607794] ACPI: EC: Look up EC in DSDT > [ 1.610167] ACPI: Executed 1 blocks of module-level executable AML code > [ 1.640134] ACPI: Interpreter enabled > [ 1.640189] ACPI: (supports S0 S1 S3 S4 S5) > [ 1.640412] ACPI: Using IOAPIC for interrupt routing > [ 1.640514] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > [ 1.642726] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > [ 1.646706] PCI: Using MMCONFIG at e0000000 - efffffff > [ 1.654909] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 (20090903/tbutils-314) > [ 1.655173] ACPI: No dock devices found. > [ 1.655351] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 1.655467] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold > [ 1.655524] pci 0000:00:00.0: PME# disabled > [ 1.655630] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 1.655686] pci 0000:00:01.0: PME# disabled > [ 1.655793] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > [ 1.655849] pci 0000:00:03.0: PME# disabled > [ 1.655957] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold > [ 1.656013] pci 0000:00:07.0: PME# disabled > [ 1.656348] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] > [ 1.656409] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] > [ 1.656469] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] > [ 1.656533] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff] > [ 1.656582] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 1.656639] pci 0000:00:1a.7: PME# disabled > [ 1.656725] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff] > [ 1.656761] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 1.656817] pci 0000:00:1b.0: PME# disabled > [ 1.656921] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 1.656977] pci 0000:00:1c.0: PME# disabled > [ 1.657083] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 1.657139] pci 0000:00:1c.2: PME# disabled > [ 1.657238] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] > [ 1.657299] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] > [ 1.657360] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] > [ 1.657426] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff] > [ 1.657475] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 1.657532] pci 0000:00:1d.7: PME# disabled > [ 1.657691] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > [ 1.657763] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO > [ 1.657821] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) > [ 1.657894] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) > [ 1.658009] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] > [ 1.658013] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] > [ 1.658018] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] > [ 1.658022] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] > [ 1.658027] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f] > [ 1.658032] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f] > [ 1.658072] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff] > [ 1.658083] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > [ 1.658121] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] > [ 1.658125] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] > [ 1.658130] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] > [ 1.658135] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] > [ 1.658139] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] > [ 1.658144] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] > [ 1.658220] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] > [ 1.658227] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] > [ 1.658235] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] > [ 1.658239] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f] > [ 1.658244] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfb480000-0xfb4fffff] > [ 1.658290] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] > [ 1.658292] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff] > [ 1.658297] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] > [ 1.658361] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff] > [ 1.658403] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff] > [ 1.658421] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff] > [ 1.658434] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xf4ef0000-0xf4efffff] > [ 1.658441] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfb5c0000-0xfb5dffff] > [ 1.658477] pci 0000:04:00.0: supports D1 D2 > [ 1.658479] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 1.658537] pci 0000:04:00.0: PME# disabled > [ 1.658636] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] > [ 1.658639] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff] > [ 1.658644] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff] > [ 1.658674] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff] > [ 1.658745] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff] > [ 1.658763] pci 0000:06:01.0: supports D1 D2 > [ 1.658764] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 1.658822] pci 0000:06:01.0: PME# disabled > [ 1.658913] pci 0000:00:1e.0: transparent bridge > [ 1.658967] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] > [ 1.658970] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff] > [ 1.658975] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff] > [ 1.659009] pci_bus 0000:00: on NUMA node 0 > [ 1.659013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 1.659257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 1.659352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > [ 1.659405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] > [ 1.659463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] > [ 1.659512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] > [ 1.659560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] > [ 1.684264] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) > [ 1.684761] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) > [ 1.685008] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) > [ 1.685504] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) > [ 1.685999] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) > [ 1.686496] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) > [ 1.686991] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) > [ 1.687487] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) > [ 1.687956] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 1.688028] vgaarb: loaded > [ 1.688137] SCSI subsystem initialized > [ 1.688296] libata version 3.00 loaded. > [ 1.688342] usbcore: registered new interface driver usbfs > [ 1.688405] usbcore: registered new interface driver hub > [ 1.688474] usbcore: registered new device driver usb > [ 1.688618] ACPI: WMI: Mapper loaded > [ 1.688668] PCI: Using ACPI for IRQ routing > [ 1.688846] Bluetooth: Core ver 2.15 > [ 1.688916] NET: Registered protocol family 31 > [ 1.688968] Bluetooth: HCI device and connection manager initialized > [ 1.689024] Bluetooth: HCI socket layer initialized > [ 1.689076] NET: Registered protocol family 8 > [ 1.689128] NET: Registered protocol family 20 > [ 1.689185] NetLabel: Initializing > [ 1.689235] NetLabel: domain hash size = 128 > [ 1.689286] NetLabel: protocols = UNLABELED CIPSOv4 > [ 1.689347] NetLabel: unlabeled traffic allowed by default > [ 1.689424] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 1.689631] hpet0: 4 comparators, 64-bit 14.318180 MHz counter > [ 1.750486] Switching to clocksource tsc > [ 1.751759] pnp: PnP ACPI init > [ 1.751822] ACPI: bus type pnp registered > [ 1.754433] pnp: PnP ACPI: found 15 devices > [ 1.754486] ACPI: ACPI bus type pnp unregistered > [ 1.754544] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved > [ 1.754602] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved > [ 1.754659] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved > [ 1.754716] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved > [ 1.754773] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved > [ 1.754843] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved > [ 1.754903] system 00:07: ioport range 0x290-0x29f has been reserved > [ 1.754961] system 00:08: ioport range 0x4d0-0x4d1 has been reserved > [ 1.755016] system 00:08: ioport range 0x800-0x87f has been reserved > [ 1.755073] system 00:08: ioport range 0x500-0x57f could not be reserved > [ 1.755129] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved > [ 1.755186] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved > [ 1.755243] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved > [ 1.755302] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved > [ 1.755360] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved > [ 1.755431] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved > [ 1.755489] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved > [ 1.755548] system 00:0e: iomem range 0x0-0x9ffff could not be reserved > [ 1.755604] system 00:0e: iomem range 0xc0000-0xcffff has been reserved > [ 1.755660] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved > [ 1.755716] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved > [ 1.755787] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved > [ 1.760488] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 1.760543] pci 0000:00:01.0: IO window: disabled > [ 1.760597] pci 0000:00:01.0: MEM window: disabled > [ 1.760652] pci 0000:00:01.0: PREFETCH window: disabled > [ 1.760707] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 > [ 1.760762] pci 0000:00:03.0: IO window: 0xc000-0xcfff > [ 1.760818] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff > [ 1.761617] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff > [ 1.761691] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 > [ 1.761745] pci 0000:00:07.0: IO window: disabled > [ 1.761800] pci 0000:00:07.0: MEM window: disabled > [ 1.761854] pci 0000:00:07.0: PREFETCH window: disabled > [ 1.761909] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 > [ 1.761965] pci 0000:00:1c.0: IO window: 0x1000-0x1fff > [ 1.762021] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc03fffff > [ 1.762078] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff > [ 1.762152] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > [ 1.762207] pci 0000:00:1c.2: IO window: 0xd000-0xdfff > [ 1.762263] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff > [ 1.762320] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff > [ 1.762399] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07 > [ 1.762454] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff > [ 1.762510] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff > [ 1.762568] pci 0000:06:01.0: PREFETCH window: 0xc4000000-0xc7ffffff > [ 1.762625] pci 0000:06:01.0: MEM window: 0xc8000000-0xcbffffff > [ 1.762682] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 > [ 1.762738] pci 0000:00:1e.0: IO window: 0xe000-0xefff > [ 1.762794] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff > [ 1.762851] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff > [ 1.762931] pci 0000:00:01.0: setting latency timer to 64 > [ 1.762937] pci 0000:00:03.0: setting latency timer to 64 > [ 1.762944] pci 0000:00:07.0: setting latency timer to 64 > [ 1.762950] pci 0000:00:1c.0: enabling device (0106 -> 0107) > [ 1.763009] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 1.763066] pci 0000:00:1c.0: setting latency timer to 64 > [ 1.763074] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 1.763131] pci 0000:00:1c.2: setting latency timer to 64 > [ 1.763136] pci 0000:00:1e.0: setting latency timer to 64 > [ 1.763143] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 1.763203] pci_bus 0000:00: resource 0 io: [0x00-0xffff] > [ 1.763204] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > [ 1.763206] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] > [ 1.763208] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff] > [ 1.763209] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] > [ 1.763211] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff] > [ 1.763213] pci_bus 0000:05: resource 1 mem: [0xc0000000-0xc03fffff] > [ 1.763214] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff] > [ 1.763216] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] > [ 1.763218] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff] > [ 1.763219] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff] > [ 1.763221] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] > [ 1.763222] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff] > [ 1.763224] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff] > [ 1.763225] pci_bus 0000:06: resource 3 io: [0x00-0xffff] > [ 1.763227] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] > [ 1.763229] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff] > [ 1.763230] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff] > [ 1.763232] pci_bus 0000:07: resource 2 pref mem [0xc4000000-0xc7ffffff] > [ 1.763233] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff] > [ 1.763258] NET: Registered protocol family 2 > [ 1.763380] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 1.763962] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > [ 1.764625] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 1.764814] TCP: Hash tables configured (established 262144 bind 65536) > [ 1.764870] TCP reno registered > [ 1.764987] NET: Registered protocol family 1 > [ 1.765187] pci 0000:02:00.0: Boot video device > [ 1.765224] Trying to unpack rootfs image as initramfs... > [ 1.891482] Freeing initrd memory: 7709k freed > [ 1.892896] Scanning for low memory corruption every 60 seconds > [ 1.893034] audit: initializing netlink socket (disabled) > [ 1.893096] type=2000 audit(1257354651.780:1): initialized > [ 1.896800] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.897814] VFS: Disk quotas dquot_6.5.2 > [ 1.897912] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.898380] fuse init (API version 7.13) > [ 1.898484] msgmni has been set to 24021 > [ 1.898725] alg: No test for stdrng (krng) > [ 1.898783] io scheduler noop registered > [ 1.898834] io scheduler anticipatory registered > [ 1.898887] io scheduler deadline registered > [ 1.898948] io scheduler cfq registered (default) > [ 1.899099] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X > [ 1.899106] pcieport 0000:00:01.0: setting latency timer to 64 > [ 1.899198] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X > [ 1.899203] pcieport 0000:00:03.0: setting latency timer to 64 > [ 1.899291] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X > [ 1.899296] pcieport 0000:00:07.0: setting latency timer to 64 > [ 1.899382] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X > [ 1.899389] pcieport 0000:00:1c.0: setting latency timer to 64 > [ 1.899481] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X > [ 1.899488] pcieport 0000:00:1c.2: setting latency timer to 64 > [ 1.899550] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support > [ 1.899556] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support > [ 1.899560] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support > [ 1.899565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 1.899677] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 1.899821] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 1.899894] ACPI: Power Button [PWRB] > [ 1.899971] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 1.900041] ACPI: Power Button [PWRF] > [ 1.900779] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113) > [ 1.901312] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113) > [ 1.903931] Monitor-Mwait will be used to enter C-1 state > [ 1.903950] Monitor-Mwait will be used to enter C-2 state > [ 1.903966] Monitor-Mwait will be used to enter C-3 state > [ 1.904005] processor LNXCPU:00: registered as cooling_device0 > [ 1.904450] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113) > [ 1.904915] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113) > [ 1.907543] processor LNXCPU:01: registered as cooling_device1 > [ 1.907995] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113) > [ 1.908469] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113) > [ 1.911096] processor LNXCPU:02: registered as cooling_device2 > [ 1.911552] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113) > [ 1.912027] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113) > [ 1.914645] processor LNXCPU:03: registered as cooling_device3 > [ 1.915099] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113) > [ 1.915568] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113) > [ 1.918189] processor LNXCPU:04: registered as cooling_device4 > [ 1.918648] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113) > [ 1.919126] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113) > [ 1.921743] processor LNXCPU:05: registered as cooling_device5 > [ 1.922204] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113) > [ 1.922689] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113) > [ 1.925315] processor LNXCPU:06: registered as cooling_device6 > [ 1.925763] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113) > [ 1.926237] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113) > [ 1.928864] processor LNXCPU:07: registered as cooling_device7 > [ 1.931249] XENFS: not registering filesystem on non-xen platform > [ 1.932027] Linux agpgart interface v0.103 > [ 1.932080] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.932934] brd: module loaded > [ 1.933258] loop: module loaded > [ 1.933351] input: Macintosh mouse button emulation as /devices/virtual/input/input2 > [ 1.933507] ata_piix 0000:00:1f.2: version 2.13 > [ 1.933522] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 > [ 1.933581] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 1.933811] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 1.933848] scsi0 : ata_piix > [ 1.933941] scsi1 : ata_piix > [ 1.935195] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20 > [ 1.935256] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20 > [ 1.935327] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20 > [ 1.935386] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] > [ 1.935612] ata_piix 0000:00:1f.5: setting latency timer to 64 > [ 1.935636] scsi2 : ata_piix > [ 1.935715] scsi3 : ata_piix > [ 1.936749] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20 > [ 1.936808] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20 > [ 1.937235] Fixed MDIO Bus: probed > [ 1.937287] PPP generic driver version 2.4.2 > [ 1.937389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.937458] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 1.937524] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 1.937527] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 1.937606] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > [ 1.937693] ehci_hcd 0000:00:1a.7: debug port 1 > [ 1.941631] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > [ 1.941641] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000 > [ 1.964967] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 1.965077] usb usb1: configuration #1 chosen from 1 choice > [ 1.965148] hub 1-0:1.0: USB hub found > [ 1.965201] hub 1-0:1.0: 6 ports detected > [ 1.965296] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 1.965360] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 1.965362] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 1.965433] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > [ 1.965519] ehci_hcd 0000:00:1d.7: debug port 1 > [ 1.969454] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 1.969463] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000 > [ 1.994950] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 1.995047] usb usb2: configuration #1 chosen from 1 choice > [ 1.995115] hub 2-0:1.0: USB hub found > [ 1.995168] hub 2-0:1.0: 6 ports detected > [ 1.995257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.995321] uhci_hcd: USB Universal Host Controller Interface driver > [ 1.995411] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 1.995471] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 1.995473] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 1.995547] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > [ 1.995642] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 > [ 1.995744] usb usb3: configuration #1 chosen from 1 choice > [ 1.995812] hub 3-0:1.0: USB hub found > [ 1.995865] hub 3-0:1.0: 2 ports detected > [ 1.995947] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > [ 1.996007] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 1.996009] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 1.996079] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > [ 1.996174] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 > [ 1.996272] usb usb4: configuration #1 chosen from 1 choice > [ 1.996341] hub 4-0:1.0: USB hub found > [ 1.996393] hub 4-0:1.0: 2 ports detected > [ 1.996474] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > [ 1.996533] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > [ 1.996536] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 1.996605] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 > [ 1.996698] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00 > [ 1.996798] usb usb5: configuration #1 chosen from 1 choice > [ 1.996867] hub 5-0:1.0: USB hub found > [ 1.996919] hub 5-0:1.0: 2 ports detected > [ 1.997002] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > [ 1.997062] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 1.997064] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 1.997134] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 > [ 1.997222] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 > [ 1.997321] usb usb6: configuration #1 chosen from 1 choice > [ 1.997388] hub 6-0:1.0: USB hub found > [ 1.997441] hub 6-0:1.0: 2 ports detected > [ 1.997521] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > [ 1.997580] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 1.997582] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 1.998395] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 > [ 1.998484] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 > [ 1.998584] usb usb7: configuration #1 chosen from 1 choice > [ 1.998652] hub 7-0:1.0: USB hub found > [ 1.998706] hub 7-0:1.0: 2 ports detected > [ 1.998786] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 1.998845] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 1.998848] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 1.998921] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 > [ 1.999009] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 > [ 1.999112] usb usb8: configuration #1 chosen from 1 choice > [ 1.999180] hub 8-0:1.0: USB hub found > [ 1.999233] hub 8-0:1.0: 2 ports detected > [ 1.999344] PNP: No PS/2 controller found. Probing ports directly. > [ 2.001923] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 2.001983] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 2.002077] mice: PS/2 mouse device common for all mice > [ 2.002173] Driver 'rtc_cmos' needs updating - please use bus_type methods > [ 2.002244] rtc_cmos 00:03: RTC can wake from S4 > [ 2.002315] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 2.002391] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 2.002531] device-mapper: uevent: version 1.0.3 > [ 2.002632] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx > [ 2.002793] device-mapper: multipath: version 1.1.0 loaded > [ 2.002857] device-mapper: multipath round-robin: version 1.0.0 loaded > [ 2.003256] cpuidle: using governor ladder > [ 2.003551] cpuidle: using governor menu > [ 2.003897] TCP cubic registered > [ 2.004033] NET: Registered protocol family 10 > [ 2.004429] lo: Disabled Privacy Extensions > [ 2.004705] NET: Registered protocol family 17 > [ 2.004767] Bluetooth: L2CAP ver 2.14 > [ 2.004817] Bluetooth: L2CAP socket layer initialized > [ 2.004871] Bluetooth: SCO (Voice Link) ver 0.6 > [ 2.004923] Bluetooth: SCO socket layer initialized > [ 2.005015] Bluetooth: RFCOMM TTY layer initialized > [ 2.005070] Bluetooth: RFCOMM socket layer initialized > [ 2.005123] Bluetooth: RFCOMM ver 1.11 > [ 2.009780] PM: Resume from disk failed. > [ 2.009787] registered taskstats version 1 > [ 2.010229] Magic number: 1:749:187 > [ 2.010394] rtc_cmos 00:03: setting system clock to 2009-11-04 17:10:52 UTC (1257354652) > [ 2.010469] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 2.010523] EDD information not available. > [ 2.291460] ata3: SATA link down (SStatus 0 SControl 300) > [ 2.440581] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.460932] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7 > [ 2.460995] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 2.480924] ata4.00: configured for UDMA/133 > [ 2.624790] usb 3-2: new low speed USB device using uhci_hcd and address 2 > [ 2.790398] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.790473] ata1.01: SATA link down (SStatus 0 SControl 300) > [ 2.790539] ata1.01: link offline, clearing class 3 to NONE > [ 2.790702] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 2.790766] ata2.01: SATA link down (SStatus 0 SControl 300) > [ 2.810800] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100 > [ 2.810907] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 > [ 2.810963] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 2.813565] usb 3-2: configuration #1 chosen from 1 choice > [ 2.830794] ata2.00: configured for UDMA/133 > [ 2.850545] ata1.00: configured for UDMA/100 > [ 2.851842] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5 > [ 2.855851] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > [ 2.855930] Uniform CD-ROM driver Revision: 3.20 > [ 2.856045] sr 0:0:0:0: Attached scsi CD-ROM sr0 > [ 2.856072] sr 0:0:0:0: Attached scsi generic sg0 type 5 > [ 2.856276] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 > [ 2.856443] sd 1:0:0:0: Attached scsi generic sg1 type 0 > [ 2.856600] sd 1:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) > [ 2.856643] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 > [ 2.856705] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) > [ 2.856732] sd 3:0:0:0: [sdb] Write Protect is off > [ 2.856733] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 2.856748] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 2.856819] sdb: > [ 2.856918] sd 3:0:0:0: Attached scsi generic sg2 type 0 > [ 2.857085] sd 1:0:0:0: [sda] Write Protect is off > [ 2.857141] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.857155] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 2.857297] sda: unknown partition table > [ 2.867728] sd 1:0:0:0: [sda] Attached SCSI disk > [ 2.867991] sdb1 sdb2 < sdb5 > > [ 2.890655] sd 3:0:0:0: [sdb] Attached SCSI disk > [ 2.890764] Freeing unused kernel memory: 540k freed > [ 2.890902] Write protecting the kernel read-only data: 7552k > [ 2.960902] Floppy drive(s): fd0 is 1.44M > [ 2.966532] usbcore: registered new interface driver hiddev > [ 2.969771] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.969849] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ 2.969997] r8169 0000:04:00.0: setting latency timer to 64 > [ 2.970049] r8169 0000:04:00.0: irq 53 for MSI/MSI-X > [ 2.970576] eth0: RTL8168c/8111c at 0xffffc9000007e000, 00:24:8c:a7:6e:2d, XID 1c4000c0 IRQ 53 > [ 2.976467] FDC 0 is a post-1991 82077 > [ 2.985611] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3 > [ 2.985723] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-2/input0 > [ 3.010571] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4 > [ 3.010689] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-2/input1 > [ 3.010780] usbcore: registered new interface driver usbhid > [ 3.010880] usbhid: v2.6:USB HID core driver > [ 3.140904] usb 6-2: new full speed USB device using uhci_hcd and address 2 > [ 3.324942] usb 6-2: configuration #1 chosen from 1 choice > [ 4.079158] PM: Starting manual resume from disk > [ 4.079161] PM: Resume from partition 8:21 > [ 4.079162] PM: Checking hibernation image. > [ 4.079367] PM: Error -22 checking image file > [ 4.079370] PM: Resume from disk failed. > [ 4.142309] EXT4-fs (sdb1): mounted filesystem with ordered data mode > [ 6.625698] Adding 2000052k swap on /dev/sdb5. Priority:-1 extents:1 across:2000052k > [ 7.849284] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled > [ 7.855346] SGI XFS Quota Management subsystem > [ 7.886584] XFS mounting filesystem sda > [ 8.020792] Ending clean XFS mount for filesystem: sda > [ 8.823748] udev: starting version 147 > [ 9.710498] nvidia: module license 'NVIDIA' taints kernel. > [ 9.710501] Disabling lock debugging due to kernel taint > [ 10.156989] cfg80211: Calling CRDA to update world regulatory domain > [ 10.171979] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410] > [ 10.171997] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI > [ 10.171999] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI > [ 10.172004] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44 > [ 10.173900] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 > [ 10.173905] nvidia 0000:02:00.0: setting latency timer to 64 > [ 10.174023] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 > [ 10.418185] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17 > [ 10.418188] yenta_cardbus 0000:06:01.0: Socket status: 30000020 > [ 10.418191] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a > [ 10.418196] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff > [ 10.418198] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff > [ 10.418200] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff > [ 10.540799] lp: driver loaded but no devices found > [ 10.942281] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 10.949231] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80 > [ 10.949233] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff > [ 10.949235] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0302, rf: 0003, rev: 0002561c. > [ 10.961990] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 11.048748] cfg80211: World regulatory domain updated: > [ 11.048750] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 11.048751] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 11.048753] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 11.048755] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 11.048756] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 11.048758] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 11.081556] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 > [ 11.081584] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] > [ 11.081645] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c > [ 11.210391] phy0: Selected rate control algorithm 'minstrel' > [ 11.210928] Registered led device: rt61pci-phy0::radio > [ 11.210966] Registered led device: rt61pci-phy0::assoc > [ 11.426723] usbcore: registered new interface driver snd-usb-audio > [ 11.427862] coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.427898] coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.427991] coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.428087] coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.428125] coretemp coretemp.4: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.428157] coretemp coretemp.5: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.428184] coretemp coretemp.6: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.428271] coretemp coretemp.7: Unable to access MSR 0xEE, for Tjmax, left at default > [ 11.441678] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 11.441852] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 11.484954] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 11.485278] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use > [ 11.485280] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or > [ 11.485281] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > [ 11.513347] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002) > [ 11.513353] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 11.603683] hda_codec: ALC1200: BIOS auto-probing. > [ 13.389405] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 13.986143] Hammerfall-DSP: Firmware already present, initializing card. > [ 15.184533] r8169: eth0: link down > [ 15.185650] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 15.387562] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'. > [ 15.387565] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin > [ 15.544241] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8. > [ 15.676621] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. > [ 15.676628] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. > [ 15.676634] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. > [ 15.676640] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. > [ 15.677679] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 25.297686] ppdev: user-space parallel port driver > [ 28.107305] CPU0 attaching NULL sched-domain. > [ 28.107309] CPU1 attaching NULL sched-domain. > [ 28.107310] CPU2 attaching NULL sched-domain. > [ 28.107312] CPU3 attaching NULL sched-domain. > [ 28.107313] CPU4 attaching NULL sched-domain. > [ 28.107314] CPU5 attaching NULL sched-domain. > [ 28.107316] CPU6 attaching NULL sched-domain. > [ 28.107317] CPU7 attaching NULL sched-domain. > [ 28.190785] CPU0 attaching sched-domain: > [ 28.190787] domain 0: span 0,4 level SIBLING > [ 28.190789] groups: 0 (cpu_power = 589) 4 (cpu_power = 589) > [ 28.190792] domain 1: span 0-7 level MC > [ 28.190794] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 28.190800] CPU1 attaching sched-domain: > [ 28.190801] domain 0: span 1,5 level SIBLING > [ 28.190802] groups: 1 (cpu_power = 589) 5 (cpu_power = 589) > [ 28.190805] domain 1: span 0-7 level MC > [ 28.190806] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 28.190812] CPU2 attaching sched-domain: > [ 28.190813] domain 0: span 2,6 level SIBLING > [ 28.190814] groups: 2 (cpu_power = 589) 6 (cpu_power = 589) > [ 28.190817] domain 1: span 0-7 level MC > [ 28.190818] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 28.190823] CPU3 attaching sched-domain: > [ 28.190824] domain 0: span 3,7 level SIBLING > [ 28.190826] groups: 3 (cpu_power = 589) 7 (cpu_power = 589) > [ 28.190829] domain 1: span 0-7 level MC > [ 28.190830] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 28.190835] CPU4 attaching sched-domain: > [ 28.190836] domain 0: span 0,4 level SIBLING > [ 28.190837] groups: 4 (cpu_power = 589) 0 (cpu_power = 589) > [ 28.190840] domain 1: span 0-7 level MC > [ 28.190842] groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) > [ 28.190847] CPU5 attaching sched-domain: > [ 28.190848] domain 0: span 1,5 level SIBLING > [ 28.190849] groups: 5 (cpu_power = 589) 1 (cpu_power = 589) > [ 28.190852] domain 1: span 0-7 level MC > [ 28.190853] groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) > [ 28.190859] CPU6 attaching sched-domain: > [ 28.190860] domain 0: span 2,6 level SIBLING > [ 28.190861] groups: 6 (cpu_power = 589) 2 (cpu_power = 589) > [ 28.190864] domain 1: span 0-7 level MC > [ 28.190865] groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) > [ 28.190870] CPU7 attaching sched-domain: > [ 28.190871] domain 0: span 3,7 level SIBLING > [ 28.190873] groups: 7 (cpu_power = 589) 3 (cpu_power = 589) > [ 28.190876] domain 1: span 0-7 level MC > [ 28.190877] groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) > [ 86.409045] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 86.409209] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 86.412957] wlan0: direct probe responded > [ 86.412962] wlan0: authenticate with AP 00:24:fe:09:94:18 (try 1) > [ 86.416343] wlan0: authenticated > [ 86.416361] wlan0: associate with AP 00:24:fe:09:94:18 (try 1) > [ 86.419280] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2) > [ 86.419282] wlan0: associated > [ 86.420465] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 88.872600] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. > [ 88.872604] Please file bug report to http://rt2x00.serialmonkey.com. > [ 97.096637] wlan0: no IPv6 routers present > [ 631.853445] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 631.853456] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 631.853466] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 631.853475] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 631.929711] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 631.929750] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 631.948559] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 631.950289] wlan0: direct probe responded > [ 631.950293] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 631.954044] wlan0: authenticated > [ 631.991386] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 631.993618] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 631.993622] wlan0: associated > [ 631.993934] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 631.993942] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 631.993950] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 631.993958] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 677.910672] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 677.910685] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 677.910693] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 677.910701] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 677.910709] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 679.458583] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 679.478323] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 679.480351] wlan0: direct probe responded > [ 679.480355] wlan0: authenticate with AP 00:24:fe:09:94:18 (try 1) > [ 679.482828] wlan0: authenticated > [ 679.482848] wlan0: associate with AP 00:24:fe:09:94:18 (try 1) > [ 679.485996] wlan0: RX ReassocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2) > [ 679.486000] wlan0: associated > [ 871.756709] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 871.756719] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 871.756726] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 871.756734] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 871.834625] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 871.834666] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 871.854802] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 871.856453] wlan0: direct probe responded > [ 871.856457] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 871.858184] wlan0: authenticated > [ 871.896378] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 871.898260] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 871.898264] wlan0: associated > [ 871.898875] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 871.898909] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 871.898919] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 871.898929] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 917.819830] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 917.819843] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 917.819851] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 917.819859] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 917.819866] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 919.366662] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 919.389718] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 919.586979] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 2) > [ 919.786869] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 3) > [ 919.986197] wlan0: direct probe to AP 00:24:fe:09:94:18 timed out > [ 925.773981] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 925.775992] wlan0: direct probe responded > [ 925.775996] wlan0: authenticate with AP 00:24:fe:09:94:18 (try 1) > [ 925.778936] wlan0: authenticated > [ 925.778955] wlan0: associate with AP 00:24:fe:09:94:18 (try 1) > [ 925.781540] wlan0: RX ReassocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2) > [ 925.781543] wlan0: associated > [ 991.710855] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 991.710864] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 991.710873] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 991.710880] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 991.833019] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 991.833059] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 991.853052] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 991.854656] wlan0: direct probe responded > [ 991.854661] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 991.856415] wlan0: authenticated > [ 991.894763] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 991.902095] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 991.902100] wlan0: associated > [ 991.902605] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 991.902613] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 991.902621] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 991.902629] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1037.776170] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 1037.776183] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1037.776192] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1037.776199] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1037.776207] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1039.320831] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 1039.340475] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 1039.342469] wlan0: direct probe responded > [ 1039.342473] wlan0: authenticate with AP 00:24:fe:09:94:18 (try 1) > [ 1039.345279] wlan0: authenticated > [ 1039.345299] wlan0: associate with AP 00:24:fe:09:94:18 (try 1) > [ 1039.347910] wlan0: RX ReassocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2) > [ 1039.347914] wlan0: associated > [ 1111.666903] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1111.666912] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1111.666921] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1111.666928] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1111.743367] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 1111.743408] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 1111.763503] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 1111.963267] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 2) > [ 1111.964988] wlan0: direct probe responded > [ 1111.964992] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 1111.966753] wlan0: authenticated > [ 1111.966771] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 1111.969096] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 1111.969099] wlan0: associated > [ 1111.969454] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1111.969461] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1111.969469] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1111.969477] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1155.736323] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 1155.736335] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1155.736344] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1155.736415] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1155.736424] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1157.285521] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 1157.305987] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 1157.505130] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 2) > [ 1157.705131] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 3) > [ 1157.905642] wlan0: direct probe to AP 00:24:fe:09:94:18 timed out > [ 1163.902756] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 1163.904411] wlan0: direct probe responded > [ 1163.904415] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 1163.958044] wlan0: authenticated > [ 1163.958063] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 1163.962692] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 1163.962695] wlan0: associated > [ 1163.963009] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1163.963017] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1163.963025] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1163.963033] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1217.702957] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 1217.702969] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1217.702977] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1217.702985] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1217.702993] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1219.271545] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 1219.273152] wlan0: direct probe responded > [ 1219.273157] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 1219.274939] wlan0: authenticated > [ 1219.274960] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 1219.277147] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 1219.277150] wlan0: associated > [ 1219.277480] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1219.277488] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1219.277496] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1219.277503] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1457.614602] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 1457.614615] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1457.614623] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1457.614631] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1457.614639] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1459.209592] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 1459.211254] wlan0: direct probe responded > [ 1459.211259] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 1459.212978] wlan0: authenticated > [ 1459.212996] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 1459.215260] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 1459.215263] wlan0: associated > [ 1459.215769] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1459.215777] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1459.215785] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1459.215792] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1471.529821] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1471.529828] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1471.529835] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1471.529841] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1471.585463] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 1471.585501] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 1471.605499] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 1471.607487] wlan0: direct probe responded > [ 1471.607490] wlan0: authenticate with AP 00:24:fe:09:94:18 (try 1) > [ 1471.610845] wlan0: authenticated > [ 1471.666559] wlan0: associate with AP 00:24:fe:09:94:18 (try 1) > [ 1471.669919] wlan0: RX ReassocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2) > [ 1471.669922] wlan0: associated > [ 1591.481020] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1591.481029] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1591.481037] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1591.481045] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1591.562677] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 1591.562722] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 1591.582741] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 1591.592157] wlan0: direct probe responded > [ 1591.592161] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 1591.594157] wlan0: authenticated > [ 1591.624398] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 1591.626246] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 1591.626249] wlan0: associated > [ 1591.626628] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1591.626636] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1591.626644] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1591.626652] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1656.653960] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. > [ 1656.653963] Please file bug report to http://rt2x00.serialmonkey.com. > [ 1755.419796] wlan0: deauthenticated from 00:14:6c:5a:96:60 (Reason: 7) > [ 1755.419809] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1755.419817] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1755.419825] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1755.419833] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1756.967256] wlan0: deauthenticating from 00:14:6c:5a:96:60 by local choice (reason=3) > [ 1756.985669] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) > [ 1756.987739] wlan0: direct probe responded > [ 1756.987744] wlan0: authenticate with AP 00:24:fe:09:94:18 (try 1) > [ 1756.990263] wlan0: authenticated > [ 1756.990282] wlan0: associate with AP 00:24:fe:09:94:18 (try 1) > [ 1756.993557] wlan0: RX ReassocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=2) > [ 1756.993561] wlan0: associated > [ 1759.427571] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. > [ 1759.427574] Please file bug report to http://rt2x00.serialmonkey.com. > [ 1822.420522] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. > [ 1822.420524] Please file bug report to http://rt2x00.serialmonkey.com. > [ 1951.374836] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1951.374845] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1951.374873] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1951.374881] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. > [ 1951.451087] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 1951.451126] wlan0: deauthenticating from 00:24:fe:09:94:18 by local choice (reason=3) > [ 1951.471202] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 1) > [ 1951.670923] wlan0: direct probe to AP 00:14:6c:5a:96:60 (try 2) > [ 1951.672651] wlan0: direct probe responded > [ 1951.672655] wlan0: authenticate with AP 00:14:6c:5a:96:60 (try 1) > [ 1951.674408] wlan0: authenticated > [ 1951.674427] wlan0: associate with AP 00:14:6c:5a:96:60 (try 1) > [ 1951.676580] wlan0: RX ReassocResp from 00:14:6c:5a:96:60 (capab=0x401 status=0 aid=1) > [ 1951.676583] wlan0: associated > [ 1951.677126] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. > [ 1951.677134] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. > [ 1951.677142] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. > [ 1951.677150] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. -- John W. Linville Someday the world will need a hero, and you linville@xxxxxxxxxxxxx might be all we have. Be ready. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
