[PATCH 14/41] rt2800pci: add rt2800_regbusy_read() wrapper

[Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>]

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] rt2800pci: add rt2800_regbusy_read() wrapper

Part of preparations for later code unification.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/net/wireless/rt2x00/rt2800pci.c |   12 ++++++------
 drivers/net/wireless/rt2x00/rt2800pci.h |    8 ++++++++
 2 files changed, 14 insertions(+), 6 deletions(-)

Index: b/drivers/net/wireless/rt2x00/rt2800pci.c
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -69,14 +69,14 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
  * The _lock versions must be used if you already hold the csr_mutex
  */
 #define WAIT_FOR_BBP(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+	rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
 #define WAIT_FOR_RFCSR(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+	rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
 #define WAIT_FOR_RF(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+	rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
 #define WAIT_FOR_MCU(__dev, __reg) \
-	rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-			       H2M_MAILBOX_CSR_OWNER, (__reg))
+	rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			    H2M_MAILBOX_CSR_OWNER, (__reg))
 
 static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 				const unsigned int word, const u8 value)
@@ -350,7 +350,7 @@ static void rt2800pci_efuse_read(struct 
 	rt2800_register_write(rt2x00dev, EFUSE_CTRL, reg);
 
 	/* Wait until the EEPROM has been loaded */
-	rt2x00pci_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
+	rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
 
 	/* Apparently the data is read from end to start */
 	rt2800_register_read(rt2x00dev, EFUSE_DATA3,
Index: b/drivers/net/wireless/rt2x00/rt2800pci.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -63,6 +63,14 @@ static inline void rt2800_register_multi
 	rt2x00pci_register_multiwrite(rt2x00dev, offset, value, length);
 }
 
+static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
+				      const unsigned int offset,
+				      const struct rt2x00_field32 field,
+				      u32 *reg)
+{
+	return rt2x00pci_regbusy_read(rt2x00dev, offset, field, reg);
+}
+
 /*
  * RF chip defines.
  *
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html