From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] rt2800pci: add rt2800_mcu_request() wrapper
Part of preparations for later code unification.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
Index: b/drivers/net/wireless/rt2x00/rt2800pci.c
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -276,6 +276,13 @@ static void rt2800pci_mcu_request(struct
mutex_unlock(&rt2x00dev->csr_mutex);
}
+static inline void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+ const u8 command, const u8 token,
+ const u8 arg0, const u8 arg1)
+{
+ rt2800pci_mcu_request(rt2x00dev, command, token, arg0, arg1);
+}
+
static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
{
unsigned int i;
@@ -467,10 +474,10 @@ static void rt2800pci_brightness_set(str
EEPROM_FREQ_LED_MODE);
if (led->type == LED_TYPE_RADIO) {
- rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
enabled ? 0x20 : 0);
} else if (led->type == LED_TYPE_ASSOC) {
- rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
} else if (led->type == LED_TYPE_QUALITY) {
/*
@@ -481,7 +488,7 @@ static void rt2800pci_brightness_set(str
* work with bitshifting:
* (1 << level) - 1
*/
- rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
(1 << brightness / (LED_FULL / 6)) - 1,
polarity);
}
@@ -2037,7 +2044,7 @@ static int rt2800pci_enable_radio(struct
/*
* Send signal to firmware during boot time.
*/
- rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
/*
* Enable RX.
@@ -2063,15 +2070,15 @@ static int rt2800pci_enable_radio(struct
* Initialize LED control
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
- rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+ rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
word & 0xff, (word >> 8) & 0xff);
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
- rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+ rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
word & 0xff, (word >> 8) & 0xff);
rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
- rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+ rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
word & 0xff, (word >> 8) & 0xff);
return 0;
@@ -2120,10 +2127,10 @@ static int rt2800pci_set_state(struct rt
* if the device is booting and wasn't asleep it will return
* failure when attempting to wakeup.
*/
- rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+ rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
if (state == STATE_AWAKE) {
- rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
+ rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
