When receiving a frame, report the antenna info, long/short preamble
status, 20/40 MHz flag, long/short guard interval status, MCS/legacy
rate status, and MCS/legacy rate index to the stack.
Signed-off-by: Lennert Buytenhek <buytenh@xxxxxxxxxxx>
---
drivers/net/wireless/mwl8k.c | 31 +++++++++++++++++++++++++------
1 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 8931be9..7462fca 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -168,7 +168,7 @@ struct mwl8k_priv {
/* PHY parameters */
struct ieee80211_supported_band band;
struct ieee80211_channel channels[14];
- struct ieee80211_rate rates[12];
+ struct ieee80211_rate rates[13];
bool radio_on;
bool radio_short_preamble;
@@ -207,7 +207,7 @@ struct mwl8k_vif {
* Subset of supported legacy rates.
* Intersection of AP and STA supported rates.
*/
- struct ieee80211_rate legacy_rates[12];
+ struct ieee80211_rate legacy_rates[13];
/* number of supported legacy rates */
u8 legacy_nrates;
@@ -239,9 +239,10 @@ static const struct ieee80211_rate mwl8k_rates[] = {
{ .bitrate = 10, .hw_value = 2, },
{ .bitrate = 20, .hw_value = 4, },
{ .bitrate = 55, .hw_value = 11, },
+ { .bitrate = 110, .hw_value = 22, },
+ { .bitrate = 220, .hw_value = 44, },
{ .bitrate = 60, .hw_value = 12, },
{ .bitrate = 90, .hw_value = 18, },
- { .bitrate = 110, .hw_value = 22, },
{ .bitrate = 120, .hw_value = 24, },
{ .bitrate = 180, .hw_value = 36, },
{ .bitrate = 240, .hw_value = 48, },
@@ -600,7 +601,7 @@ struct ewc_ht_info {
/* Peer Entry flags - used to define the type of the peer node */
#define MWL8K_PEER_TYPE_ACCESSPOINT 2
-#define MWL8K_IEEE_LEGACY_DATA_RATES 12
+#define MWL8K_IEEE_LEGACY_DATA_RATES 13
#define MWL8K_MCS_BITMAP_SIZE 16
struct peer_capability_info {
@@ -750,6 +751,13 @@ struct mwl8k_rx_desc {
#define MWL8K_RX_DESCS 256
#define MWL8K_RX_MAXSZ 3800
+#define RATE_INFO_SHORTPRE 0x8000
+#define RATE_INFO_ANTSELECT(x) (((x) >> 11) & 0x3)
+#define RATE_INFO_RATEID(x) (((x) >> 3) & 0x3f)
+#define RATE_INFO_40MHZ 0x0004
+#define RATE_INFO_SHORTGI 0x0002
+#define RATE_INFO_MCS_FORMAT 0x0001
+
static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index)
{
struct mwl8k_priv *priv = hw->priv;
@@ -906,6 +914,7 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
struct ieee80211_rx_status status;
unsigned long addr;
struct ieee80211_hdr *wh;
+ u16 rate_info;
rx_desc = rxq->rx_desc_area + rxq->rx_head;
if (!(rx_desc->rx_ctrl & MWL8K_RX_CTRL_OWNED_BY_HOST))
@@ -937,14 +946,24 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
if (mwl8k_capture_bssid(priv, wh))
mwl8k_save_beacon(hw, skb);
+ rate_info = le16_to_cpu(rx_desc->rate_info);
+
memset(&status, 0, sizeof(status));
status.mactime = 0;
status.signal = -rx_desc->rssi;
status.noise = -rx_desc->noise_level;
status.qual = rx_desc->link_quality;
- status.antenna = 1;
- status.rate_idx = 1;
+ status.antenna = RATE_INFO_ANTSELECT(rate_info);
+ status.rate_idx = RATE_INFO_RATEID(rate_info);
status.flag = 0;
+ if (rate_info & RATE_INFO_SHORTPRE)
+ status.flag |= RX_FLAG_SHORTPRE;
+ if (rate_info & RATE_INFO_40MHZ)
+ status.flag |= RX_FLAG_40MHZ;
+ if (rate_info & RATE_INFO_SHORTGI)
+ status.flag |= RX_FLAG_SHORT_GI;
+ if (rate_info & RATE_INFO_MCS_FORMAT)
+ status.flag |= RX_FLAG_HT;
status.band = IEEE80211_BAND_2GHZ;
status.freq = ieee80211_channel_to_frequency(rx_desc->channel);
memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
--
1.5.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
