Hello,
I would like to ask if you would be willing to help me in the problem I
am experiencing.
I have notebook toshiba tecra M6 with Intel(R) PRO/Wireless 3945ABG/BG
wifi card, that is working normally in windows.
I installed back-track 4 pre final linux on usb drive and followed the
guide here (using root account):
http://forums.remote-exploit.-org/backtrack-4-working--hardware/27565-bt
4-pre-final--driver-iwl3945-injection--solved.html#post157700
I have installed lastest firmware for my wifi
(iwlwifi-3945-ucode-15.32.2.9) and compat-wireless-2.6.32-rc4 drivers.
However I am experiencing problems with loading drivers and receive
error: iwl3945 0000:02:00.0: Failed to register hw (error -17)
Can you please provide any help with what this error means?
Please see my dmseg in attachment.
--
Regards,
Juraj Kristofik
Linux version 2.6.30.7 (root@irukanji) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Fri Sep 18 15:36:50 PDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f790000 (usable)
BIOS-e820: 000000007f790000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec18000 (reserved)
BIOS-e820: 00000000fec20000 - 00000000fec28000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7f790 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FEDA0000 mask FFFFE0000 write-back
1 base 07F800000 mask FFF800000 uncachable
2 base 0FFF00000 mask FFFF00000 write-protect
3 base 000000000 mask F80000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 36dbd000 - 37fef2c0
Allocated new RAMDISK: 009e9000 - 01c1b2c0
Move RAMDISK from 0000000036dbd000 - 0000000037fef2bf to 009e9000 - 01c1b2bf
ACPI: RSDP 000f01e0 00014 (v00 TOSHIB)
ACPI: RSDT 7f790000 00048 (v01 TOSHIB A0044 20060905 TASM 04010000)
ACPI: FACP 7f790074 00084 (v02 TOSHIB A0044 20030101 TASM 04010000)
ACPI: DSDT 7f7900f8 057E7 (v02 TOSHIB A0044 20070222 MSFT 0100000E)
ACPI: FACS 000eee00 00040
ACPI: SSDT 7f7958df 00306 (v02 TOSHIB A0044 20060907 MSFT 0100000E)
ACPI: BOOT 7f79004c 00028 (v01 TOSHIB A0044 20060905 TASM 04010000)
ACPI: APIC 7f796497 00068 (v01 TOSHIB A0044 20060905 TASM 04010000)
ACPI: MCFG 7f7964ff 0003C (v01 TOSHIB A0044 20060905 TASM 04010000)
ACPI: HPET 7f79656f 00038 (v01 TOSHIB A0044 20060905 TASM 04010000)
ACPI: TCPA 7f7965a7 00032 (v02 TOSHIB A0044 20060905 TASM 04010000)
ACPI: SLIC 7f796900 00176 (v01 TOSHIB A0044 20060905 TASM 04010000)
ACPI: SSDT 7f7965d9 00327 (v02 TOSHIB A0044 20061110 MSFT 0100000E)
ACPI: Local APIC address 0xfee00000
1151MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00009e4374] TEXT DATA BSS ==> [0000100000 - 00009e4374]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [00009e5000 - 00009e820c] BRK ==> [00009e5000 - 00009e820c]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [00009e9000 - 0001c1b2c0] NEW RAMDISK ==> [00009e9000 - 0001c1b2c0]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f790
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007f790
On node 0 totalpages: 522031
free_area_init_node: node 0, pgdat c08e7b40, node_mem_map c1c1c000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2304 pages used for memmap
HighMem zone: 292498 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xd808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000
PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000
PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c2c16000, static data 23068 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
Kernel command line: root=UUID=08ff48d5-fe3a-4a2c-8a9e-98e2930f494f ro vga=0x317
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1828.858 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0007f790)
Memory: 2042200k/2088512k available (6103k kernel code, 45036k reserved, 2103k data, 432k init, 1179208k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc090d000 - 0xc0979000 ( 432 kB)
.data : 0xc06f5d0d - 0xc0903a44 (2103 kB)
.text : 0xc0100000 - 0xc06f5d0d (6103 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.12 BogoMIPS (lpj=6096193)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3658.91 BogoMIPS (lpj=6095868)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7318.03 BogoMIPS).
net_namespace: 980 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 6745.200 MB/sec
xor: using function: pIII_sse (6745.200 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd639, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning (dsobject-0502): Package List length (C) larger than NumElements count (3), truncated
[20090320]
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xffd80000-0xffdfffff]
pci 0000:00:02.0: reg 14 io port: [0xcff8-0xcfff]
pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xffd40000-0xffd7ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0x000000-0x003fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xafe0-0xafff]
pci 0000:00:1d.1: reg 20 io port: [0xaf80-0xaf9f]
pci 0000:00:1d.2: reg 20 io port: [0xaf60-0xaf7f]
pci 0000:00:1d.3: reg 20 io port: [0xaf40-0xaf5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xffd3fc00-0xffd3ffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 01e0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xaf38-0xaf3f]
pci 0000:00:1f.2: reg 14 io port: [0xaf34-0xaf37]
pci 0000:00:1f.2: reg 18 io port: [0xaf28-0xaf2f]
pci 0000:00:1f.2: reg 1c io port: [0xaf24-0xaf27]
pci 0000:00:1f.2: reg 20 io port: [0xaf10-0xaf1f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xffce0000-0xffcfffff]
pci 0000:01:00.0: reg 18 io port: [0xbfe0-0xbfff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xffc00000-0xffcfffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xffaff000-0xffafffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.2: bridge 32bit mmio: [0xffa00000-0xffafffff]
pci 0000:03:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:0b.0: supports D1 D2
pci 0000:03:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0b.0: PME# disabled
pci 0000:03:0b.1: reg 10 32bit mmio: [0x000000-0x0007ff]
pci 0000:03:0b.1: reg 14 32bit mmio: [0x000000-0x003fff]
pci 0000:03:0b.1: supports D1 D2
pci 0000:03:0b.1: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0b.1: PME# disabled
pci 0000:03:0b.2: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:0b.2: supports D1 D2
pci 0000:03:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0b.2: PME# disabled
pci 0000:03:0b.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:03:0b.3: supports D1 D2
pci 0000:03:0b.3: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0b.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 691 MB/s
raid6: int32x2 730 MB/s
raid6: int32x4 546 MB/s
raid6: int32x8 522 MB/s
raid6: mmxx1 2323 MB/s
raid6: mmxx2 2668 MB/s
raid6: sse1x1 1425 MB/s
raid6: sse1x2 1955 MB/s
raid6: sse2x1 2722 MB/s
raid6: sse2x2 3037 MB/s
raid6: using algorithm sse2x2 (3037 MB/s)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7f78ffff could not be reserved
system 00:00: iomem range 0x7f790000-0x7f79ffff has been reserved
system 00:00: iomem range 0x7f7a0000-0x7f7fffff has been reserved
system 00:00: iomem range 0x7f800000-0x7fffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec17fff could not be reserved
system 00:00: iomem range 0xfec20000-0xfec27fff has been reserved
system 00:00: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:00: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:00: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:00: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:00: iomem range 0xffe00000-0xffffffff has been reserved
system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:09: ioport range 0x1e0-0x1ef has been reserved
system 00:09: ioport range 0x480-0x48f has been reserved
system 00:09: ioport range 0xe000-0xe07f has been reserved
system 00:09: ioport range 0xe080-0xe0ff has been reserved
system 00:09: ioport range 0xe400-0xe47f has been reserved
system 00:09: ioport range 0xe480-0xe4ff has been reserved
system 00:09: ioport range 0xe800-0xe87f has been reserved
system 00:09: ioport range 0xe880-0xe8ff has been reserved
system 00:09: ioport range 0xec00-0xec7f has been reserved
system 00:09: ioport range 0xec80-0xecff has been reserved
system 00:09: ioport range 0xd800-0xd87f has been reserved
system 00:09: ioport range 0xd880-0xd89f has been reserved
system 00:09: ioport range 0xeeb0-0xeebf has been reserved
system 00:09: ioport range 0xeec0-0xeeff has been reserved
system 00:09: ioport range 0x690-0x6ff has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0xb000-0xbfff
pci 0000:00:1c.0: MEM window: 0xffc00000-0xffcfffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xffa00000-0xffafffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:03:0b.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:0b.0: IO window: 0x001000-0x0010ff
pci 0000:03:0b.0: IO window: 0x001400-0x0014ff
pci 0000:03:0b.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:03:0b.0: MEM window: 0x8c000000-0x8fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x1000-0x1fff
pci 0000:00:1e.0: MEM window: 0x8c000000-0x91ffffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:0b.0: enabling device (0000 -> 0003)
pci 0000:03:0b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xffc00000-0xffcfffff]
pci_bus 0000:02: resource 1 mem: [0xffa00000-0xffafffff]
pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:03: resource 1 mem: [0x8c000000-0x91ffffff]
pci_bus 0000:03: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x10ff]
pci_bus 0000:04: resource 1 io: [0x1400-0x14ff]
pci_bus 0000:04: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:04: resource 3 mem: [0x8c000000-0x8fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18632k freed
Simple Boot Flag value 0xb read from CMOS RAM was invalid
Simple Boot Flag at 0x7c set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1723
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 6144k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 128150 bytes,<6>...found (1024x768, 128042 bytes, v3).
Console: switching to colour frame buffer device 107x34
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRB]
ACPI: SSDT 7f795f27 000F3 (v02 TOSHIB A0044 20060907 MSFT 0100000E)
ACPI: SSDT 7f796090 0034E (v02 TOSHIB A0044 20060907 MSFT 0100000E)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: SSDT 7f79601a 00076 (v02 TOSHIB A0044 20060907 MSFT 0100000E)
ACPI: SSDT 7f7963de 00079 (v02 TOSHIB A0044 20060907 MSFT 0100000E)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
isapnp: Scanning for PnP cards...
ACPI Warning (nspredef-0949): \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer [20090320]
ACPI: Battery Slot [BAT1] (battery present)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /class/input/input3
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2461]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.03.01-k1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.1
Copyright(c) 2004-2009 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.2 (January 21, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xaf10 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xaf18 irq 15
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ohci1394 0000:03:0b.1: enabling device (0000 -> 0002)
ohci1394 0000:03:0b.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[90006000-900067ff] Max Packet=[2048] IR/IT contexts=[4/8]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffd3fc00
ata1.00: ATA-6: TOSHIBA MK1032GSX, AS022M, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
ata1.00: configured for UDMA/100
hub 1-0:1.0: 8 ports detected
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000af60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000af40
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /class/input/input4
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
sda1 sda2 sda3 < sda5 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: MATSHITADVD-RAM UJ-842S, 1.40, max UDMA/33
ata2.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842S 1.40 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Freeing unused kernel memory: 432k freed
usb 1-7: new high speed USB device using ehci_hcd and address 3
fuse init (API version 7.11)
usb 1-7: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Clocksource tsc unstable (delta = -113797684 ns)
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000390000876d80]
e1000e 0000:01:00.0: Disabling L1 ASPM
e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:01:00.0: setting latency timer to 64
e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM
0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:b7:df:fd:69
0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
scsi 4:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 4:0:0:0: [sdb] 31588351 512-byte hardware sectors: (16.1 GB/15.0 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 < sdb5 >
sd 4:0:0:0: [sdb] Attached SCSI removable disk
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udevd version 124 started
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpi device:0d: registered as cooling_device2
input: Video Bus as /class/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
input: Toshiba RFKill Switch as /class/input/input6
yenta_cardbus 0000:03:0b.0: CardBus bridge found [1179:0001]
yenta_cardbus 0000:03:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:03:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:03:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:03:0b.0: TI: mfunc 0x01aa1022, devctl 0x64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0xd860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
intel_rng: FWH not detected
cfg80211: Calling CRDA for country: US
yenta_cardbus 0000:03:0b.0: ISA IRQ mask 0x0cf8, PCI irq 21
yenta_cardbus 0000:03:0b.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:02:00.0: setting latency timer to 64
yenta_cardbus 0000:03:0b.0: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: clean.
yenta_cardbus 0000:03:0b.0: pcmcia: parent PCI bridge Memory window: 0x8c000000 - 0x91ffffff
yenta_cardbus 0000:03:0b.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
tifm_7xx1 0000:03:0b.2: enabling device (0000 -> 0002)
tifm_7xx1 0000:03:0b.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:03:0b.3: SDHCI controller found [104c:803c] (rev 0)
sdhci-pci 0000:03:0b.3: enabling device (0000 -> 0002)
sdhci-pci 0000:03:0b.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:03:0b.3] using DMA
iwl3945 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:02:00.0: irq 27 for MSI/MSI-X
iwl3945 0000:02:00.0: Failed to register hw (error -17)
iwl3945 0000:02:00.0: PCI INT A disabled
iwl3945: probe of 0000:02:00.0 failed with error -17
usb 3-2: new full speed USB device using uhci_hcd and address 3
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: enabling device (0000 -> 0002)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 3-2: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
input: PS/2 Mouse as /class/input/input7
input: AlpsPS/2 ALPS GlidePoint as /class/input/input8
lp: driver loaded but no devices found
Adding 706820k swap on /dev/sdb5. Priority:-1 extents:1 across:706820k
EXT3 FS on sdb1, internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
warning: `dhcpd3' uses 32-bit capabilities (legacy support in use)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-1: new high speed USB device using ehci_hcd and address 5
usb 1-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 5:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 5:0:0:0: [sdc] 7577600 512-byte hardware sectors: (3.87 GB/3.61 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI removable disk
