On Mon, Oct 12, 2009 at 07:54:38PM -0400, Bob Copeland wrote: > On Mon, Oct 12, 2009 at 10:23:16PM +0200, Richard Zidlicky wrote: > > it works like in mainline and fails. > > Huh, well it should be equivalent to your patch, so I'm stumped > as to why. mee too. I am trying to verify all variants because I do remember that adding the change_chan patch on top of clean 2.6.31 broke that while I do vaguely remember that reverting this patch form 2.6.31.[23] did not make a working wlan. However testing is time consuming - the machine requires allways a complete shutdown, power off reboot. Strange things were happening even in 2.6.31 - for example my ad-hoc network was listed twice by iwlist scan - strangely one of the entries has 0db signal strength. Similar listing on both ends. Here is what the other end is reporting if that is of any help.. ### ath5k end shut down here ### [52262.000044] wlan0: expiring inactive STA 00:22:43:2c:76:0f [52262.000050] phy6: Removed STA 00:22:43:2c:76:0f [52262.003025] phy6: Destroyed STA 00:22:43:2c:76:0f [52343.404540] wlan0: RX ProbeReq SA=00:60:b3:06:f4:17 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [52345.711165] wlan0: RX ProbeReq SA=00:60:b3:06:f4:17 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) ... ... ... ... [52350.930907] wlan0: RX ProbeReq SA=00:60:b3:06:f4:17 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [52881.645705] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [52881.645711] wlan0: Sending ProbeResp to 00:22:43:2c:76:0f [52883.886696] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [52883.886702] wlan0: Sending ProbeResp to 00:22:43:2c:76:0f [52915.330070] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [52947.327315] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53011.323892] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53106.964036] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53138.613029] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53266.603257] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53298.604621] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53330.599864] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53362.598110] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53382.140098] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) [53382.140104] wlan0: Sending ProbeResp to 00:22:43:2c:76:0f [53413.898474] wlan0: RX ProbeReq SA=00:22:43:2c:76:0f DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) Richard -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
