Also in Ubuntu Karmic Beta (where the firmware is present) it doesn't
work (radio not working, can't find any access point)
2009/10/11 Bráulio B O Bhavamitra <brauliobo@xxxxxxxxx>:
> Since the upgrade from kernel 2.6.30 to 2.6.31 on archlinux the usb
> wireless from Ralink doesn't work anymore.
> Please ask for more info if necessary.
>
> dmesg:
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_regbusy_read: Error - Indirect register access
> failed: offset=0x00007010, value=0xffff8800
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_regbusy_read: Error - Indirect register access
> failed: offset=0x00007010, value=0xffff8800
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed
> for offset 0x7010 with error -19.
> phy2 -> rt2x00usb_regbusy_read: Error - Indirect register access
> failed: offset=0x00007010, value=0xffff8800
> usb 2-2: new high speed USB device using ehci_hcd and address 6
> usb 2-2: configuration #1 chosen from 1 choice
> phy3: Selected rate control algorithm 'minstrel'
> Registered led device: rt2800usb-phy3::radio
> Registered led device: rt2800usb-phy3::assoc
> Registered led device: rt2800usb-phy3::quality
> rt2800usb 2-2:1.0: firmware: requesting rt2870.bin
> phy3 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
> rt2800usb 2-2:1.0: firmware: requesting rt2870.bin
> phy3 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
>
> lsusb -v:
> Bus 002 Device 006: ID 148f:3070 Ralink Technology, Corp.
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x148f Ralink Technology, Corp.
> idProduct 0x3070
> bcdDevice 1.01
> iManufacturer 1 Ralink
> iProduct 2 802.11 n WLAN
> iSerial 3
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 67
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 450mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 7
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 5
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x04 EP 4 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x05 EP 5 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x06 EP 6 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
��.n��������+%������w��{.n�����{���zW����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
