Set firmware and hardware version in wiphy so that user space can access
it.
Signed-off-by: Kalle Valo <kalle.valo@xxxxxx>
---
drivers/net/wireless/at76c50x-usb.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 8e1a55d..b6de657 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -2217,6 +2217,8 @@ static struct ieee80211_supported_band at76_supported_band = {
static int at76_init_new_device(struct at76_priv *priv,
struct usb_interface *interface)
{
+ struct wiphy *wiphy;
+ size_t len;
int ret;
/* set up the endpoint information */
@@ -2254,6 +2256,7 @@ static int at76_init_new_device(struct at76_priv *priv,
priv->device_unplugged = 0;
/* mac80211 initialisation */
+ wiphy = priv->hw->wiphy;
priv->hw->wiphy->max_scan_ssids = 1;
priv->hw->wiphy->max_scan_ie_len = 0;
priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
@@ -2265,6 +2268,18 @@ static int at76_init_new_device(struct at76_priv *priv,
SET_IEEE80211_DEV(priv->hw, &interface->dev);
SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
+ len = sizeof(wiphy->fw_version);
+ snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
+ priv->fw_version.major, priv->fw_version.minor,
+ priv->fw_version.patch, priv->fw_version.build);
+
+ len = sizeof(wiphy->hw_version);
+ snprintf(wiphy->hw_version, len, "%d", priv->board_type);
+
+ /* null terminate the strings in case they were truncated */
+ wiphy->fw_version[len - 1] = '\0';
+ wiphy->hw_version[len - 1] = '\0';
+
ret = ieee80211_register_hw(priv->hw);
if (ret) {
printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
