This patch fixes some coding style issues and moves MAX_RATE_POWER into hw.h
Signed-off-by: Joerg Albert <jal2@xxxxxx>
---
drivers/net/wireless/ath/ar9170/hw.h | 2 ++
drivers/net/wireless/ath/ar9170/phy.c | 28 +++++++++++++++-------------
2 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 6cbfb2f..8811314 100644
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -311,6 +311,8 @@ struct ar9170_tx_control {
#define AR9170_TX_PHY_SHORT_GI 0x80000000
+#define AR5416_MAX_RATE_POWER 63
+
struct ar9170_rx_head {
u8 plcp[12];
} __packed;
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index b3e5cf3..941c699 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -1241,9 +1241,6 @@ static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
struct ar9170_calctl_edges edges[],
u32 freq)
{
-/* TODO: move somewhere else */
-#define AR5416_MAX_RATE_POWER 63
-
int i;
u8 rc = AR5416_MAX_RATE_POWER;
u8 f;
@@ -1261,10 +1258,11 @@ static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
break;
}
if (i > 0 && f < edges[i].channel) {
- if (f > edges[i-1].channel &&
- edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+ if (f > edges[i - 1].channel &&
+ edges[i - 1].power_flags &
+ AR9170_CALCTL_EDGE_FLAGS) {
/* lower channel has the inband flag set */
- rc = edges[i-1].power_flags &
+ rc = edges[i - 1].power_flags &
~AR9170_CALCTL_EDGE_FLAGS;
}
break;
@@ -1272,10 +1270,10 @@ static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
}
if (i == AR5416_NUM_BAND_EDGES) {
- if (f > edges[i-1].channel &&
- edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+ if (f > edges[i - 1].channel &&
+ edges[i - 1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
/* lower channel has the inband flag set */
- rc = edges[i-1].power_flags &
+ rc = edges[i - 1].power_flags &
~AR9170_CALCTL_EDGE_FLAGS;
}
}
@@ -1297,7 +1295,8 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
int pwr_cal_len;
} *modes;
- /* order is relevant in the mode_list_*: we fall back to the
+ /*
+ * order is relevant in the mode_list_*: we fall back to the
* lower indices if any mode is missed in the EEPROM.
*/
struct ctl_modes mode_list_2ghz[] = {
@@ -1315,7 +1314,8 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
- /* TODO: investigate the differences between OTUS'
+ /*
+ * TODO: investigate the differences between OTUS'
* hpreg.c::zfHpGetRegulatoryDomain() and
* ath/regd.c::ath_regd_get_band_ctl() -
* e.g. for FCC3_WORLD the OTUS procedure
@@ -1362,13 +1362,15 @@ static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
freq+f_off);
- /* TODO: check if the regulatory max. power is
+ /*
+ * TODO: check if the regulatory max. power is
* controlled by cfg80211 for DFS
* (hpmain applies it to max_power itself for DFS freq)
*/
} else {
- /* Workaround in otus driver, hpmain.c, line 3906:
+ /*
+ * Workaround in otus driver, hpmain.c, line 3906:
* if no data for 5GHT20 are found, take the
* legacy 5G value.
* We extend this here to fallback from any other *HT or
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
