The generic analog switch routine is not correct for LP-PHY according
to the latest specs. Implement the proper analog core switch routine.
Signed-off-by: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
---
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 80da9c7..b0e127a 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -2160,6 +2160,16 @@ static int lpphy_b2063_tune(struct b43_w
return 0;
}
+static void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+ if (on) {
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x7);
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x7);
+ } else {
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFF8);
+ }
+}
+
static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
unsigned int new_channel)
{
@@ -2239,7 +2249,7 @@ const struct b43_phy_operations b43_phyo
.radio_read = b43_lpphy_op_radio_read,
.radio_write = b43_lpphy_op_radio_write,
.software_rfkill = b43_lpphy_op_software_rfkill,
- .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_analog = b43_lpphy_op_switch_analog,
.switch_channel = b43_lpphy_op_switch_channel,
.get_default_chan = b43_lpphy_op_get_default_chan,
.set_rx_antenna = b43_lpphy_op_set_rx_antenna,
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
