From: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
Separate set_hw_params() function for 6000
series from 5000/1000 series because:
1) 6000 series use different set of sensitivity range table
2) 6000 series has different uCode image size
Also include the new sensitivity parameters needed by sensitivity
algorithm.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@xxxxxxxxx>
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-5000.c | 12 +----
drivers/net/wireless/iwlwifi/iwl-6000.c | 71 +++++++++++++++++++++++++++++-
drivers/net/wireless/iwlwifi/iwl-calib.c | 2 +-
3 files changed, 73 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index ea215bb..e4acfc3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -833,16 +833,8 @@ int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
priv->hw_params.max_stations = IWL5000_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
- switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
- case CSR_HW_REV_TYPE_6x00:
- case CSR_HW_REV_TYPE_6x50:
- priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
- priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
- break;
- default:
- priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
- priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
- }
+ priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
+ priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 36655c2..957205c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -44,6 +44,7 @@
#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-5000-hw.h"
+#include "iwl-6000-hw.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
@@ -100,8 +101,76 @@ static void iwl6000_nic_config(struct iwl_priv *priv)
/* else do nothing, uCode configured */
}
+static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+ .min_nrg_cck = 97,
+ .max_nrg_cck = 0, /* not used, set to 0 */
+ .auto_corr_min_ofdm = 80,
+ .auto_corr_min_ofdm_mrc = 128,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 192,
+
+ .auto_corr_max_ofdm = 145,
+ .auto_corr_max_ofdm_mrc = 232,
+ .auto_corr_max_ofdm_x1 = 145,
+ .auto_corr_max_ofdm_mrc_x1 = 232,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 175,
+ .auto_corr_min_cck_mrc = 160,
+ .auto_corr_max_cck_mrc = 310,
+ .nrg_th_cck = 97,
+ .nrg_th_ofdm = 100,
+};
+
+static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+ if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) ||
+ (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
+ IWL_ERR(priv,
+ "invalid queues_num, should be between %d and %d\n",
+ IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES);
+ return -EINVAL;
+ }
+
+ priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
+ priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+ priv->hw_params.scd_bc_tbls_size =
+ IWL50_NUM_QUEUES * sizeof(struct iwl5000_scd_bc_tbl);
+ priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+ priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+ priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+ priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+ priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+
+ priv->hw_params.max_bsm_size = 0;
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+ priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+ priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+ priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+ priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+ priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+ if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+ priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+ /* Set initial sensitivity parameters */
+ /* Set initial calibration set */
+ priv->hw_params.sens = &iwl6000_sensitivity;
+ priv->hw_params.calib_init_cfg =
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_TX_IQ_PERD) |
+ BIT(IWL_CALIB_BASE_BAND);
+
+ return 0;
+}
+
static struct iwl_lib_ops iwl6000_lib = {
- .set_hw_params = iwl5000_hw_set_hw_params,
+ .set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwl5000_txq_set_sched,
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index c4b565a..6e73317 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -516,7 +516,7 @@ void iwl_init_sensitivity(struct iwl_priv *priv)
for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
data->nrg_silence_rssi[i] = 0;
- data->auto_corr_ofdm = 90;
+ data->auto_corr_ofdm = ranges->auto_corr_min_ofdm;
data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1;
data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
