On Monday 31 August 2009 19:53:31 John W. Linville wrote:
> On Sun, Aug 30, 2009 at 05:55:40PM +0200, Michael Buesch wrote:
> > On Sunday 30 August 2009 17:10:23 Larry Finger wrote:
> > > Michael Buesch wrote:
> > > > On Sunday 30 August 2009 02:15:55 Gábor Stefanik wrote:
> > > >> static void lpphy_pr41573_workaround(struct b43_wldev *dev)
> > > >> {
> > > >> struct b43_phy_lp *lpphy = dev->phy.lp;
> > > >> @@ -1357,28 +1488,440 @@ static void lpphy_pr41573_workaround(struct b43_wldev *dev)
> > > >> b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
> > > >> saved_tab_size, saved_tab);
> > > >> }
> > > >> + b43_put_phy_into_reset(dev);
> > > >
> > > > Are you sure you really want this?
> > > > This function completely disables the PHY on the backplane and keeps the physical
> > > > PHY reset pin asserted (even after return from the function).
> > > > So the PHY will physically be powered down from this point on. The following
> > > > PHY accesses could even hang the machine, because the PHY won't respond to
> > > > register accesses anymore.
> > > >
> > > > We currently only use this function on A/G Multi-PHY devices to permanently
> > > > hard-disable the PHY that's not used.
> > >
> > > The PHY reset routine in
> > > http://bcm-v4.sipsolutions.net/802.11/PHY/Reset, which I just updated
> > > for the latest N PHY changes, appears to be a different routine than
> > > b43_put_phy_into_reset(). The names are confusing.
> >
> > b43_put_phy_into_reset() is opencoded in the specifications in various init
> > routines. There's no separate specs page for that function.
> > But I think the code is straightforward and easy to understand.
>
> So is this patch right or not? Should I hold onto it for 2.6.33
> (i.e. after the 2.6.32 merge window)?
I'm pretty sure it's incorrect.
--
Greetings, Michael.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
