Doing an RTC reset when DMA is active may corrupt memory, make sure no DMA is active at this moment by doing an AHB reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/hw.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e340dac..71f27f3 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1712,8 +1712,15 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah) REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT); + if (!AR_SREV_9100(ah)) + REG_WRITE(ah, AR_RC, AR_RC_AHB); + REG_WRITE(ah, AR_RTC_RESET, 0); udelay(2); + + if (!AR_SREV_9100(ah)) + REG_WRITE(ah, AR_RC, 0); + REG_WRITE(ah, AR_RTC_RESET, 1); if (!ath9k_hw_wait(ah, -- 1.5.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
