Various mwl8k_txq_xmit changes:
- Extract the QoS field before adding the DMA header.
- Only write to tx->status once, and only after all the other
descriptor fields have been set.
- Do all tx state manipulation under the tx spinlock.
- Remove the priv->inconfig check, as all transmit queues will
be frozen during config cycles, so we won't ever be asked to
transmit if a config cycle is running.
- Remove some more dead code.
Signed-off-by: Lennert Buytenhek <buytenh@xxxxxxxxxxx>
---
drivers/net/wireless/mwl8k.c | 145 +++++++++++++++---------------------------
1 files changed, 52 insertions(+), 93 deletions(-)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index e46cf3c..f0d1fa7 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -1257,46 +1257,60 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
{
struct mwl8k_priv *priv = hw->priv;
struct ieee80211_tx_info *tx_info;
+ struct mwl8k_vif *mwl8k_vif;
struct ieee80211_hdr *wh;
struct mwl8k_tx_queue *txq;
struct mwl8k_tx_desc *tx;
- struct mwl8k_dma_data *tr;
- struct mwl8k_vif *mwl8k_vif;
dma_addr_t dma;
- u16 qos = 0;
- bool qosframe = false, ampduframe = false;
- bool mcframe = false, eapolframe = false;
- bool amsduframe = false;
- __le16 fc;
+ u32 txstatus;
+ u8 txdatarate;
+ u16 qos;
- txq = priv->txq + index;
- tx = txq->tx_desc_area + txq->tx_tail;
-
- BUG_ON(txq->tx_skb[txq->tx_tail] != NULL);
+ wh = (struct ieee80211_hdr *)skb->data;
+ if (ieee80211_is_data_qos(wh->frame_control))
+ qos = le16_to_cpu(*((__le16 *)ieee80211_get_qos_ctl(wh)));
+ else
+ qos = 0;
- /*
- * Append HW DMA header to start of packet.
- */
mwl8k_add_dma_header(skb);
+ wh = &((struct mwl8k_dma_data *)skb->data)->wh;
tx_info = IEEE80211_SKB_CB(skb);
mwl8k_vif = MWL8K_VIF(tx_info->control.vif);
- tr = (struct mwl8k_dma_data *)skb->data;
- wh = &tr->wh;
- fc = wh->frame_control;
- qosframe = ieee80211_is_data_qos(fc);
- mcframe = is_multicast_ether_addr(wh->addr1);
- ampduframe = !!(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
u16 seqno = mwl8k_vif->seqno;
+
wh->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
wh->seq_ctrl |= cpu_to_le16(seqno << 4);
mwl8k_vif->seqno = seqno++ % 4096;
}
- if (qosframe)
- qos = le16_to_cpu(*((__le16 *)ieee80211_get_qos_ctl(wh)));
+ /* Setup firmware control bit fields for each frame type. */
+ txstatus = 0;
+ txdatarate = 0;
+ if (ieee80211_is_mgmt(wh->frame_control) ||
+ ieee80211_is_ctl(wh->frame_control)) {
+ txdatarate = 0;
+ qos = mwl8k_qos_setbit_eosp(qos);
+ /* Set Queue size to unspecified */
+ qos = mwl8k_qos_setbit_qlen(qos, 0xff);
+ } else if (ieee80211_is_data(wh->frame_control)) {
+ txdatarate = 1;
+ if (is_multicast_ether_addr(wh->addr1))
+ txstatus |= MWL8K_TXD_STATUS_MULTICAST_TX;
+
+ /* Send pkt in an aggregate if AMPDU frame. */
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ qos = mwl8k_qos_setbit_ack(qos,
+ MWL8K_TXD_ACK_POLICY_BLOCKACK);
+ else
+ qos = mwl8k_qos_setbit_ack(qos,
+ MWL8K_TXD_ACK_POLICY_NORMAL);
+
+ if (qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
+ qos = mwl8k_qos_setbit_amsdu(qos);
+ }
dma = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
@@ -1304,95 +1318,40 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb)
if (pci_dma_mapping_error(priv->pdev, dma)) {
printk(KERN_DEBUG "%s: failed to dma map skb, "
"dropping TX frame.\n", priv->name);
-
- if (skb != NULL)
- dev_kfree_skb(skb);
+ dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- /* Set desc header, cpu bit order. */
- tx->status = 0;
- tx->data_rate = 0;
- tx->tx_priority = index;
- tx->qos_control = 0;
- tx->rate_info = 0;
- tx->peer_id = mwl8k_vif->peer_id;
-
- amsduframe = !!(qos & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT);
-
- /* Setup firmware control bit fields for each frame type. */
- if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) {
- tx->data_rate = 0;
- qos = mwl8k_qos_setbit_eosp(qos);
- /* Set Queue size to unspecified */
- qos = mwl8k_qos_setbit_qlen(qos, 0xff);
- } else if (ieee80211_is_data(fc)) {
- tx->data_rate = 1;
- if (mcframe)
- tx->status |= MWL8K_TXD_STATUS_MULTICAST_TX;
+ spin_lock_bh(&priv->tx_lock);
- /*
- * Tell firmware to not send EAPOL pkts in an
- * aggregate. Verify against mac80211 tx path. If
- * stack turns off AMPDU for an EAPOL frame this
- * check will be removed.
- */
- if (eapolframe) {
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_NORMAL);
- } else {
- /* Send pkt in an aggregate if AMPDU frame. */
- if (ampduframe)
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_BLOCKACK);
- else
- qos = mwl8k_qos_setbit_ack(qos,
- MWL8K_TXD_ACK_POLICY_NORMAL);
+ txq = priv->txq + index;
- if (amsduframe)
- qos = mwl8k_qos_setbit_amsdu(qos);
- }
- }
+ BUG_ON(txq->tx_skb[txq->tx_tail] != NULL);
+ txq->tx_skb[txq->tx_tail] = skb;
- /* Convert to little endian */
+ tx = txq->tx_desc_area + txq->tx_tail;
+ tx->data_rate = txdatarate;
+ tx->tx_priority = index;
tx->qos_control = cpu_to_le16(qos);
- tx->status = cpu_to_le32(tx->status);
tx->pkt_phys_addr = cpu_to_le32(dma);
tx->pkt_len = cpu_to_le16(skb->len);
-
- txq->tx_skb[txq->tx_tail] = skb;
-
- spin_lock_bh(&priv->tx_lock);
-
- tx->status = cpu_to_le32(MWL8K_TXD_STATUS_OK |
- MWL8K_TXD_STATUS_FW_OWNED);
+ tx->rate_info = 0;
+ tx->peer_id = mwl8k_vif->peer_id;
wmb();
+ tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
+
+ txq->tx_stats.count++;
txq->tx_stats.len++;
priv->pending_tx_pkts++;
- txq->tx_stats.count++;
- txq->tx_tail++;
+ txq->tx_tail++;
if (txq->tx_tail == MWL8K_TX_DESCS)
txq->tx_tail = 0;
+
if (txq->tx_head == txq->tx_tail)
ieee80211_stop_queue(hw, index);
- if (priv->inconfig) {
- /*
- * Silently queue packet when we are in the middle of
- * a config cycle. Notify firmware only if we are
- * waiting for TXQs to empty. If a packet is sent
- * before .config() is complete, perhaps it is better
- * to drop the packet, as the channel is being changed
- * and the packet will end up on the wrong channel.
- */
- printk(KERN_ERR "%s(): WARNING TX activity while "
- "in config\n", __func__);
-
- if (priv->tx_wait != NULL)
- mwl8k_tx_start(priv);
- } else
- mwl8k_tx_start(priv);
+ mwl8k_tx_start(priv);
spin_unlock_bh(&priv->tx_lock);
--
1.5.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
