Search Linux Wireless

Re: Libertas: Association request to the driver failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2009-08-07 at 21:11 +0200, Daniel Mack wrote:
> Since a recent merge of the wireless tree to Linus' master, my SDIO
> connected libertas module fails to connect to our WLAN.
> 
> 'iwlist scanning' works fine, but wpa_supplicant keeps on spitting out
> the following message:
> 
>   CTRL-EVENT-SCAN-RESULTS 
>   Trying to associate with 00:04:0e:4b:c7:b3 (SSID='caiaq' freq=2437 MHz)
>   Association request to the driver failed
> 
> Haven't done any bisect or deeper inspection of recent changes yet. Can
> anyone point me in some direction maybe? The change must have been
> introduced between -rc3 and -rc5. My userspace did not change since
> then.

That error actually means nothing and I believe the log message has been
removed in recent supplicant versions.  It simply means that the driver
doesn't support some of the random ioctls that the supplicant tries, but
most of the time, that's not a problem.

What you can do for the time being is increase the association timeout
(which gets lowered to like 5 seconds if that message is printed because
the driver returned -1 from wpa_drv_associate()), and see if the card
does in fact associate after 10 or 15 seconds.  That is a useful point
of debugging information.

Dan


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux