Holger Schurig <hs4233@...> writes: > > > [ 415.271000] usb 1-1: upload_firmware() > > firmware device id 0x4810 is equal to the actual device id > > Looks like your firmware could be successfully loaded and checked > by the driver. > > > [ 416.350000] usb 1-1: USB control request for firmware > > upload failed. Error number -145 > > Looks like an URB (USB request block) couldn't transferred to the > device. As you speak about an embedded device: are you sure that > your USB hardware works correctly? > Hello Holger, thanks for your fast answer. I hope to be sure that the usb hardware works correctly. As i said, the same stb only booted with a rt73usb wlan stick attached has no problems with the firmware upload and also wpa-supplicant connection and everything works on wlan0. only problem are these two zd1211b usb sticks in the zd1211rw driver. the same stb running a kernel 2.6.12 and the original vendor driver 2.22.00 works without problems.. so i think i can exclude a hardware bug on the usb/stb side. Hope this helps. If any other logs are needed i will provide them. Regards Mladen -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
