2009/7/27 Pavel Roskin <proski@xxxxxxx>: > On Sun, 2009-07-26 at 22:33 +0100, Chris Clayton wrote: > >> Do you have CONFIG_MAC80211_DEFAULT_PS enabled? > > No. That may explain everything. I'll try enabling > CONFIG_MAC80211_DEFAULT_PS. > I've built and installed a kernel with all the various types of MAC80211 debugging turned on (in addition to the RT61 driver's) and with CONFIG_MAC80211_DEFAULT_PS enabled. The attached file is the output from dmesg just after a freeze occurs. (The pcmcia card eject represents me ejecting the wireless card, so that the freeze "thaws" and I can capture the output from dmesg). Let me know if any additional diagnostics are needed. I have enabled MAC80211 debugfs too. Chris > -- > Regards, > Pavel Roskin > -- No, Sir; there is nothing which has yet been contrived by man, by which so much happiness is produced as by a good tavern or inn - Doctor Samuel Johnson
[ 0.000000] Linux version 2.6.31-rc4 (chris@laptop) (gcc version 4.3.4 20090719 (prerelease) (GCC) ) #264 PREEMPT Mon Jul 27 10:04:05 BST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000100 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable) [ 0.000000] BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1ffe2 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-through [ 0.000000] 2 disabled [ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffe2000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ffe2000 page 4k [ 0.000000] kernel direct mapping tables up to 1ffe2000 @ 7000-c000 [ 0.000000] ACPI: RSDP 000fde50 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D20811 ASL 00000061) [ 0.000000] ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D20811 ASL 00000061) [ 0.000000] ACPI: DSDT fffe4000 0317A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 1ffff800 00040 [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ffe2000 [ 0.000000] low ram: 0 - 1ffe2000 [ 0.000000] node 0 low ram: 00000000 - 1ffe2000 [ 0.000000] node 0 bootmap 00001000 - 00005000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 001ffe2000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 00013effc4] TEXT DATA BSS ==> [0001000000 - 00013effc4] [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #3 [00013f0000 - 00013f6198] BRK ==> [00013f0000 - 00013f6198] [ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ffe2 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffe2 [ 0.000000] On node 0 totalpages: 130944 [ 0.000000] free_area_init_node: node 0, pgdat c1370a80, node_mem_map c13f7020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125954 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=/dev/hda2 ro noirda resume=/dev/hda3 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 515172k/524168k available (2568k kernel code, 8576k reserved, 992k data, 276k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB) [ 0.000000] vmalloc : 0xe07e2000 - 0xfffa2000 ( 503 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB) [ 0.000000] .init : 0xc137c000 - 0xc13c1000 ( 276 kB) [ 0.000000] .data : 0xc12822a9 - 0xc137a3a8 ( 992 kB) [ 0.000000] .text : 0xc1000000 - 0xc12822a9 (2568 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:288 [ 0.000000] CPU 0 irqstacks, hard=c1373000 soft=c1374000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 996.687 MHz processor. [ 0.001250] Console: colour VGA+ 80x25 [ 0.001257] console [tty0] enabled [ 0.003512] Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.37 BogoMIPS (lpj=3986748) [ 0.003607] Mount-cache hash table entries: 512 [ 0.003862] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.003917] CPU: L2 cache: 512K [ 0.003952] mce: CPU supports 5 MCE banks [ 0.004000] CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz stepping 04 [ 0.004000] Checking 'hlt' instruction... OK. [ 0.016657] ACPI: Core revision 20090521 [ 0.064110] ACPI: setting ELCR to 0200 (from 0a20) [ 0.064978] NET: Registered protocol family 16 [ 0.065189] ACPI: bus type pci registered [ 0.087852] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2 [ 0.087892] PCI: Using configuration type 1 for base access [ 0.089077] bio: create slab <bio-0> at 0 [ 0.089834] ACPI: EC: Look up EC in DSDT [ 0.130345] ACPI: Interpreter enabled [ 0.130391] ACPI: (supports S0 S1 S3 S5) [ 0.130528] ACPI: Using PIC for interrupt routing [ 0.194183] ACPI: Power Resource [PADA] (on) [ 0.218430] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.218535] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.218650] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] [ 0.218744] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.218794] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.218856] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.218866] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.218877] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.218887] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.218897] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] [ 0.218907] pci 0000:00:1f.1: reg 24 32bit mmio: [0x3a000000-0x3a0003ff] [ 0.218946] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] [ 0.218956] pci 0000:00:1f.5: reg 14 io port: [0xdc80-0xdcbf] [ 0.219008] pci 0000:00:1f.6: reg 10 io port: [0xd400-0xd4ff] [ 0.219018] pci 0000:00:1f.6: reg 14 io port: [0xdc00-0xdc7f] [ 0.219081] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.219090] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.219100] pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff] [ 0.219116] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.219136] pci 0000:01:00.0: supports D1 D2 [ 0.219170] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.219177] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.219184] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.219221] pci 0000:02:00.0: reg 10 io port: [0xec80-0xecff] [ 0.219231] pci 0000:02:00.0: reg 14 32bit mmio: [0xf8fffc00-0xf8fffc7f] [ 0.219255] pci 0000:02:00.0: reg 30 32bit mmio: [0xf9000000-0xf901ffff] [ 0.219273] pci 0000:02:00.0: supports D1 D2 [ 0.219279] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.219320] pci 0000:02:00.0: PME# disabled [ 0.219384] pci 0000:02:01.0: reg 10 32bit mmio: [0xf8000000-0xf8000fff] [ 0.219404] pci 0000:02:01.0: supports D1 D2 [ 0.219409] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.219449] pci 0000:02:01.0: PME# disabled [ 0.219513] pci 0000:02:01.1: reg 10 32bit mmio: [0xf8001000-0xf8001fff] [ 0.219533] pci 0000:02:01.1: supports D1 D2 [ 0.219539] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.219578] pci 0000:02:01.1: PME# disabled [ 0.219651] pci 0000:00:1e.0: transparent bridge [ 0.219688] pci 0000:00:1e.0: bridge io port: [0xe000-0xffff] [ 0.219696] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4000000-0xfbffffff] [ 0.219704] pci 0000:00:1e.0: bridge 32bit mmio pref: [0x30000000-0x39ffffff] [ 0.219746] pci_bus 0000:00: on NUMA node 0 [ 0.219755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.219947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.219990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.256439] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.257010] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 0.257560] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.258131] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.258665] SCSI subsystem initialized [ 0.258830] PCI: Using ACPI for IRQ routing [ 0.259124] pnp: PnP ACPI init [ 0.259170] ACPI: bus type pnp registered [ 0.302804] pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.302857] pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.303046] pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.303098] pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.303149] pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.304195] pnp 00:04: io resource (0xf000-0xf0fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304247] pnp 00:04: io resource (0xf100-0xf1fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304298] pnp 00:04: io resource (0xf200-0xf2fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304349] pnp 00:04: io resource (0xf400-0xf4fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304401] pnp 00:04: io resource (0xf500-0xf5fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304451] pnp 00:04: io resource (0xf600-0xf6fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304502] pnp 00:04: io resource (0xf800-0xf8fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304553] pnp 00:04: io resource (0xf900-0xf9fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304604] pnp 00:04: io resource (0xfa00-0xfafe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304654] pnp 00:04: io resource (0xfc00-0xfcfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304705] pnp 00:04: io resource (0xfd00-0xfdfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304756] pnp 00:04: io resource (0xfe00-0xfefe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling [ 0.304807] pnp 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling [ 0.407311] pnp: PnP ACPI: found 18 devices [ 0.407347] ACPI: ACPI bus type pnp unregistered [ 0.407397] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.407438] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.407479] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.407519] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.407559] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.407606] system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved [ 0.407646] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved [ 0.407686] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 0.407734] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.407780] system 00:03: ioport range 0x880-0x8bf has been reserved [ 0.407819] system 00:03: ioport range 0x8c0-0x8df has been reserved [ 0.407858] system 00:03: ioport range 0x8e0-0x8ff has been reserved [ 0.407911] system 00:09: ioport range 0x900-0x91f has been reserved [ 0.407950] system 00:09: ioport range 0x3f0-0x3f1 has been reserved [ 0.407998] system 00:10: ioport range 0xbf40-0xbf5f has been reserved [ 0.408048] system 00:10: ioport range 0xbf20-0xbf3f has been reserved [ 0.408095] system 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved [ 0.442871] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.442910] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.442949] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff [ 0.442988] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.443033] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 [ 0.443071] pci 0000:02:01.0: IO window: 0x00e000-0x00e0ff [ 0.443110] pci 0000:02:01.0: IO window: 0x00e400-0x00e4ff [ 0.443149] pci 0000:02:01.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.443189] pci 0000:02:01.0: MEM window: 0xf4000000-0xf7ffffff [ 0.443227] pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07 [ 0.443265] pci 0000:02:01.1: IO window: 0x00e800-0x00e8ff [ 0.443303] pci 0000:02:01.1: IO window: 0x00f000-0x00f0ff [ 0.443342] pci 0000:02:01.1: PREFETCH window: 0x34000000-0x37ffffff [ 0.443381] pci 0000:02:01.1: MEM window: 0x20000000-0x23ffffff [ 0.443420] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.443458] pci 0000:00:1e.0: IO window: 0xe000-0xffff [ 0.443497] pci 0000:00:1e.0: MEM window: 0xf4000000-0xfbffffff [ 0.443536] pci 0000:00:1e.0: PREFETCH window: 0x30000000-0x39ffffff [ 0.443588] pci 0000:00:1e.0: setting latency timer to 64 [ 0.444188] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.444227] PCI: setting IRQ 11 as level-triggered [ 0.444235] pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.444292] pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.445484] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.445491] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.445497] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.445504] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.445510] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.445517] pci_bus 0000:02: resource 0 io: [0xe000-0xffff] [ 0.445523] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff] [ 0.445529] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x39ffffff] [ 0.445535] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.445541] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.445547] pci_bus 0000:03: resource 0 io: [0xe000-0xe0ff] [ 0.445553] pci_bus 0000:03: resource 1 io: [0xe400-0xe4ff] [ 0.445559] pci_bus 0000:03: resource 2 pref mem [0x30000000-0x33ffffff] [ 0.445565] pci_bus 0000:03: resource 3 mem: [0xf4000000-0xf7ffffff] [ 0.445572] pci_bus 0000:07: resource 0 io: [0xe800-0xe8ff] [ 0.445577] pci_bus 0000:07: resource 1 io: [0xf000-0xf0ff] [ 0.445584] pci_bus 0000:07: resource 2 pref mem [0x34000000-0x37ffffff] [ 0.445590] pci_bus 0000:07: resource 3 mem: [0x20000000-0x23ffffff] [ 0.445656] NET: Registered protocol family 2 [ 0.445891] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.446536] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.446872] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.447062] TCP: Hash tables configured (established 16384 bind 16384) [ 0.447101] TCP reno registered [ 0.447251] NET: Registered protocol family 1 [ 0.451763] msgmni has been set to 1006 [ 0.453499] alg: No test for stdrng (krng) [ 0.453597] io scheduler noop registered [ 0.453807] io scheduler cfq registered (default) [ 0.453899] pci 0000:01:00.0: Boot video device [ 0.454870] ACPI: AC Adapter [AC] (on-line) [ 0.455069] input: Lid Switch as /class/input/input0 [ 0.455778] ACPI: Lid Switch [LID] [ 0.455909] input: Power Button as /class/input/input1 [ 0.455948] ACPI: Power Button [PBTN] [ 0.456113] input: Sleep Button as /class/input/input2 [ 0.456151] ACPI: Sleep Button [SBTN] [ 0.456318] Marking TSC unstable due to TSC halts in idle [ 0.456390] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.456541] processor LNXCPU:00: registered as cooling_device0 [ 0.462676] Switched to NOHz mode on CPU #0 [ 0.472862] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.472910] ACPI: Thermal Zone [THM] (60 C) [ 0.472981] isapnp: Scanning for PnP cards... [ 0.825574] isapnp: No Plug & Play device found [ 0.839385] Real Time Clock Driver v1.12b [ 0.839428] Linux agpgart interface v0.103 [ 0.839508] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 0.854729] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.854876] [drm] Initialized drm 1.1.0 20060810 [ 0.854913] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.855061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.855285] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.855550] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 0.856223] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.960554] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 0.960594] PCI: setting IRQ 5 as level-triggered [ 0.960603] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.960656] serial 0000:00:1f.6: PCI INT B disabled [ 0.960779] Uniform Multi-Platform E-IDE driver [ 0.960872] piix 0000:00:1f.1: IDE controller (0x8086:0x248a rev 0x02) [ 0.961485] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.961526] pci 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.961597] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 0.961642] ide0: BM-DMA at 0xbfa0-0xbfa7 [ 0.961694] ide1: BM-DMA at 0xbfa8-0xbfaf [ 0.961741] Probing IDE interface ide0... [ 1.241796] ACPI: Battery Slot [BAT0] (battery present) [ 1.241944] ACPI: Battery Slot [BAT1] (battery absent) [ 1.248248] hda: SAMSUNG HM160HC, ATA DISK drive [ 1.920082] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.920174] hda: UDMA/100 mode selected [ 1.920282] Probing IDE interface ide1... [ 2.656244] hdc: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive [ 2.992077] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.992868] hdc: UDMA/33 mode selected [ 2.993390] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.993471] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.993673] ide-gd driver 1.18 [ 2.993735] hda: max request size: 512KiB [ 3.053963] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 [ 3.055962] hda: cache flushes supported [ 3.056050] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > [ 3.125042] ide-cd driver 5.00 [ 3.127164] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 3.127318] Uniform CD-ROM driver Revision: 3.20 [ 3.141517] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.141640] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 3.146324] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.146366] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.146564] mice: PS/2 mouse device common for all mice [ 3.146725] input: PC Speaker as /class/input/input3 [ 3.146865] cpuidle: using governor ladder [ 3.147017] cpuidle: using governor menu [ 3.147123] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 3.147265] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 3.147333] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 3.151009] input: AT Translated Set 2 keyboard as /class/input/input4 [ 3.440327] Clocksource tsc unstable (delta = -261036248 ns) [ 3.904060] intel8x0_measure_ac97_clock: measured 55213 usecs (2654 samples) [ 3.904101] intel8x0: clocking to 48000 [ 3.905496] ALSA device list: [ 3.905530] #0: Intel 82801CA-ICH3 with CS4205 at irq 5 [ 3.906432] TCP cubic registered [ 3.906469] NET: Registered protocol family 15 [ 3.906545] Using IPI Shortcut mode [ 3.981763] kjournald starting. Commit interval 5 seconds [ 3.981819] EXT3-fs: mounted filesystem with writeback data mode. [ 3.981872] VFS: Mounted root (ext3 filesystem) readonly on device 3:2. [ 3.981953] Freeing unused kernel memory: 276k freed [ 4.708069] EXT3 FS on hda2, internal journal [ 6.217575] Platform driver 'floppy' needs updating - please use dev_pm_ops [ 6.217685] Floppy drive(s): fd0 is 1.44M [ 6.233868] FDC 0 is a post-1991 82077 [ 6.367866] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 6.367920] 3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 6.367983] 3c59x: Donald Becker and others. [ 6.368026] 0000:02:00.0: 3Com PCI 3c905C Tornado at e08ecc00. [ 6.399849] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:00e3] [ 6.399914] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI [ 6.399960] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI [ 6.400001] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64 [ 6.419838] usbcore: registered new interface driver usbfs [ 6.419934] usbcore: registered new interface driver hub [ 6.420017] usbcore: registered new device driver usb [ 6.445941] NET: Registered protocol family 23 [ 6.491110] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops [ 6.491270] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252 [ 6.491325] smsc_ircc_present: can't get sir_base of 0x2f8 [ 6.502951] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops [ 6.503106] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252 [ 6.503160] smsc_ircc_present: can't get sir_base of 0x2f8 [ 6.547500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.571108] uhci_hcd: USB Universal Host Controller Interface driver [ 6.571269] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 6.571330] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.571338] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.571440] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 6.571519] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 [ 6.571631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.571671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.571717] usb usb1: Product: UHCI Host Controller [ 6.571753] usb usb1: Manufacturer: Linux 2.6.31-rc4 uhci_hcd [ 6.571789] usb usb1: SerialNumber: 0000:00:1d.0 [ 6.572055] usb usb1: configuration #1 chosen from 1 choice [ 6.572157] hub 1-0:1.0: USB hub found [ 6.572202] hub 1-0:1.0: 2 ports detected [ 6.628924] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0498, PCI irq 11 [ 6.628975] yenta_cardbus 0000:02:01.0: Socket status: 30000006 [ 6.629022] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff [ 6.629073] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean. [ 6.630019] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff [ 6.630070] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff [ 6.630404] yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:00e3] [ 6.630457] yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI [ 6.630503] yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI [ 6.630544] yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64 [ 6.665509] parport_pc 00:0f: activated [ 6.665564] parport_pc 00:0f: reported by Plug and Play ACPI [ 6.665650] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 6.823110] Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0 [ 6.823174] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 6.860851] yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11 [ 6.860902] yenta_cardbus 0000:02:01.1: Socket status: 30000006 [ 6.860949] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff [ 6.861000] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean. [ 6.861979] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff [ 6.862030] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff [ 6.863201] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 6.880504] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 7.046558] usb 1-1: New USB device found, idVendor=03eb, idProduct=3301 [ 7.047747] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7.047787] usb 1-1: Product: Standard USB Hub [ 7.048089] usb 1-1: configuration #1 chosen from 1 choice [ 7.055608] hub 1-1:1.0: USB hub found [ 7.056545] hub 1-1:1.0: 4 ports detected [ 7.338521] usb 1-1.1: new low speed USB device using uhci_hcd and address 3 [ 7.445145] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean. [ 7.445609] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x800-0x8ff: clean. [ 7.445744] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287 [ 7.447197] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 7.448059] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean. [ 7.448517] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean. [ 7.448652] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287 [ 7.450131] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.476636] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c016 [ 7.476685] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.476733] usb 1-1.1: Product: Optical USB Mouse [ 7.476767] usb 1-1.1: Manufacturer: Logitech [ 7.477068] usb 1-1.1: configuration #1 chosen from 1 choice [ 7.533198] input: Logitech Optical USB Mouse as /class/input/input6 [ 7.533427] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.1/input0 [ 7.533514] usbcore: registered new interface driver usbhid [ 7.533554] usbhid: v2.6:USB HID core driver [ 7.754245] microcode: CPU0 sig=0x6b4, pf=0x20, revision=0x2 [ 7.754297] platform microcode: firmware: requesting intel-ucode/06-0b-04 [ 7.780189] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 8.974161] Microcode Update Driver: v2.00 removed. [ 9.220994] fuse init (API version 7.12) [ 9.629119] kjournald starting. Commit interval 5 seconds [ 9.629177] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 9.629460] EXT3 FS on hda6, internal journal [ 9.629519] EXT3-fs: mounted filesystem with writeback data mode. [ 9.655267] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 9.655364] kjournald starting. Commit interval 5 seconds [ 9.655670] EXT3 FS on hda8, internal journal [ 9.655726] EXT3-fs: mounted filesystem with writeback data mode. [ 9.693592] Adding 979956k swap on /dev/hda3. Priority:-1 extents:1 across:979956k [ 11.645284] IBM TrackPoint firmware: 0x0b, buttons: 2/3 [ 11.850288] input: TPPS/2 IBM TrackPoint as /class/input/input7 [ 13.939035] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.072034] nf_conntrack version 0.5.0 (8190 buckets, 32760 max) [ 14.910895] NET: Unregistered protocol family 23 [ 14.921604] parport_pc 00:0f: disabled [ 15.177009] 3c59x 0000:02:00.0: PCI INT A disabled [ 17.204945] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 17.206360] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 [ 17.208639] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 17.208665] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode [ 17.208689] pci 0000:01:00.0: putting AGP V2 device into 2x mode [ 17.238508] resource map sanity check conflict: 0xfcff0000 0xfd06ffff 0xfcff0000 0xfcffffff 0000:01:00.0 [ 17.238519] ------------[ cut here ]------------ [ 17.238534] WARNING: at arch/x86/mm/ioremap.c:205 __ioremap_caller+0x2aa/0x2c0() [ 17.238540] Hardware name: Latitude C610 [ 17.238544] Info: mapping multiple BARs. Your kernel is fine. [ 17.238548] Modules linked in: radeon xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables fuse usbhid uhci_hcd ehci_hcd yenta_socket rsrc_nonstatic pcmcia_core usbcore psmouse [last unloaded: floppy] [ 17.238588] Pid: 1165, comm: X Not tainted 2.6.31-rc4 #264 [ 17.238592] Call Trace: [ 17.238602] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0 [ 17.238627] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0 [ 17.238638] [<c10254ff>] ? warn_slowpath_common+0x6f/0xd0 [ 17.238646] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0 [ 17.238654] [<c10255ab>] ? warn_slowpath_fmt+0x2b/0x30 [ 17.238662] [<c101998a>] ? __ioremap_caller+0x2aa/0x2c0 [ 17.238672] [<c105644b>] ? generic_file_buffered_write+0xfb/0x330 [ 17.238681] [<c1019ab4>] ? ioremap_nocache+0x14/0x20 [ 17.238691] [<c117cd15>] ? drm_addmap_core+0x665/0x7a0 [ 17.238698] [<c117cd15>] ? drm_addmap_core+0x665/0x7a0 [ 17.238706] [<c1056b88>] ? __generic_file_aio_write_nolock+0x248/0x540 [ 17.238714] [<c117ce97>] ? drm_addmap_ioctl+0x47/0x90 [ 17.238722] [<c117e048>] ? drm_ioctl+0x138/0x320 [ 17.238730] [<c117ce50>] ? drm_addmap_ioctl+0x0/0x90 [ 17.238741] [<c10cbd60>] ? ext3_file_write+0x30/0xc0 [ 17.238753] [<c107f0fd>] ? do_sync_write+0xcd/0x110 [ 17.238762] [<c108c28f>] ? vfs_ioctl+0x7f/0x90 [ 17.238769] [<c108c403>] ? do_vfs_ioctl+0x73/0x640 [ 17.238777] [<c107fc28>] ? vfs_write+0xf8/0x130 [ 17.238784] [<c108ca0d>] ? sys_ioctl+0x3d/0x70 [ 17.238792] [<c1002e34>] ? sysenter_do_call+0x12/0x26 [ 17.238798] ---[ end trace 38f834eeb78869fb ]--- [ 17.322771] [drm] Setting GART location based on old memory map [ 17.322805] [drm] Loading R100 Microcode [ 17.322850] [drm] writeback test succeeded in 1 usecs [ 44.144079] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 44.144138] pci 0000:03:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff] [ 44.250185] cfg80211: Calling CRDA to update world regulatory domain [ 44.371250] cfg80211: World regulatory domain updated: [ 44.371262] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 44.371270] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 44.371276] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 44.371282] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 44.371288] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 44.371295] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 44.513522] rt61pci 0000:03:00.0: enabling device (0000 -> 0002) [ 44.513547] rt61pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 44.513559] rt61pci 0000:03:00.0: setting latency timer to 64 [ 44.524454] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0xff80 [ 44.524465] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0xe0ff [ 44.524473] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 0301, rf: 0003, rev: 0002561c. [ 44.563056] phy0: Selected rate control algorithm 'minstrel' [ 44.563874] Registered led device: rt61pci-phy0::radio [ 44.563910] Registered led device: rt61pci-phy0::assoc [ 44.617811] phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'. [ 44.617825] rt61pci 0000:03:00.0: firmware: requesting rt2561s.bin [ 44.651913] phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8. [ 44.667017] phy0: device now idle [ 44.690861] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. [ 44.690875] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. [ 44.690889] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. [ 44.690902] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. [ 44.720558] phy0: device no longer idle - scanning [ 44.805546] NET: Registered protocol family 17 [ 46.080096] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. [ 46.080113] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. [ 46.080126] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. [ 46.080139] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. [ 46.080156] wlan0: authenticate with AP 00:1f:33:80:09:44 [ 46.081331] wlan0: authenticated [ 46.081337] wlan0: associate with AP 00:1f:33:80:09:44 [ 46.085690] wlan0: RX AssocResp from 00:1f:33:80:09:44 (capab=0x431 status=0 aid=1) [ 46.085700] wlan0: associated [ 46.085711] phy0: Allocated STA 00:1f:33:80:09:44 [ 46.086438] phy0: Inserted STA 00:1f:33:80:09:44 [ 46.086492] phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 [ 46.086501] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. [ 46.086514] phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 [ 46.086521] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. [ 46.086533] phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 [ 46.086540] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. [ 46.086553] phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 [ 46.086560] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. [ 46.086576] wlan0: CTS protection enabled (BSSID=00:1f:33:80:09:44) [ 46.086581] wlan0: switched to short barker preamble (BSSID=00:1f:33:80:09:44) [ 46.086587] wlan0: switched to short slot time (BSSID=00:1f:33:80:09:44) [ 46.114848] TKIP decrypt: data(len=151) 00 20 01 20 00 00 00 00 aa aa 03 00 00 00 88 8e 01 03 00 7f fe 03 91 00 20 00 00 00 00 00 00 00 03 7d 7d 74 0b 7c e4 25 9c 9b dd ce 37 ac 25 d8 88 bb c0 fb a7 ce 8d 24 f1 94 3f 95 11 e7 78 a4 61 bb c0 fb a7 ce 8d 24 f1 94 3f 95 11 e7 78 a4 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 27 fa b1 10 50 d4 29 40 1c 25 3d fe d7 56 8b ef 00 20 c8 23 7d 1a 44 28 2d 09 9b 41 bc ea 6d cd 15 48 60 7b a8 e9 d5 85 ec 83 ee b9 67 01 5f 6e 6d e8 b1 e9 fe d4 [ 46.114973] TKIP decrypt: iv16=0001 iv32=00000000 [ 46.911591] cfg80211: Calling CRDA for country: GB [ 46.916917] cfg80211: Regulatory domain changed to country: GB [ 46.916928] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 46.916935] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 46.916941] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 46.916947] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 46.916952] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 112.116078] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 116.116077] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 120.119574] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 124.116069] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 128.116072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 132.116074] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 136.116068] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 140.116072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 144.116072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 148.116068] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 152.116071] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 156.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 160.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 164.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 168.120072] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 172.120073] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 175.726531] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0 [ 175.726681] wlan0: beacon loss from AP 00:1f:33:80:09:44 - sending probe request [ 175.727199] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff [ 175.727709] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 175.763682] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff [ 175.764288] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff [ 175.764826] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff [ 175.764857] wlan0: deauthenticating by local choice (reason=3) [ 175.764916] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. [ 175.764928] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. [ 175.764939] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. [ 175.764951] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. [ 175.764961] phy0: device now idle [ 175.764973] phy0: Removed STA 00:1f:33:80:09:44 [ 175.765037] phy0: Destroyed STA 00:1f:33:80:09:44 [ 176.016269] rt61pci 0000:03:00.0: PCI INT A disabled
