From: Kalle Valo <kalle.valo@xxxxxxxxx> This Production Line Testing code is currently unused and can be removed. It can be reintroduced when nl80211 test mode implemented for the driver. Signed-off-by: Kalle Valo <kalle.valo@xxxxxxxxx> --- drivers/net/wireless/wl12xx/wl1251_main.c | 54 ----------------------------- 1 files changed, 0 insertions(+), 54 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c index cf5e054..08fcf90 100644 --- a/drivers/net/wireless/wl12xx/wl1251_main.c +++ b/drivers/net/wireless/wl12xx/wl1251_main.c @@ -246,60 +246,6 @@ out: mutex_unlock(&wl->mutex); } -int wl1251_plt_start(struct wl1251 *wl) -{ - int ret; - - mutex_lock(&wl->mutex); - - wl1251_notice("power up"); - - if (wl->state != WL1251_STATE_OFF) { - wl1251_error("cannot go into PLT state because not " - "in off state: %d", wl->state); - return -EBUSY; - } - - wl->state = WL1251_STATE_PLT; - - ret = wl1251_chip_wakeup(wl); - if (ret < 0) - return ret; - - ret = wl->chip.op_boot(wl); - if (ret < 0) - return ret; - - wl1251_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver); - - ret = wl->chip.op_plt_init(wl); - if (ret < 0) - return ret; - - return 0; -} - -int wl1251_plt_stop(struct wl1251 *wl) -{ - mutex_lock(&wl->mutex); - - wl1251_notice("power down"); - - if (wl->state != WL1251_STATE_PLT) { - wl1251_error("cannot power down because not in PLT " - "state: %d", wl->state); - return -EBUSY; - } - - wl1251_disable_interrupts(wl); - wl1251_power_off(wl); - - wl->state = WL1251_STATE_OFF; - - return 0; -} - - static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct wl1251 *wl = hw->priv; -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html