On Wed, Jul 8, 2009 at 2:40 PM, Frans Pop<elendil@xxxxxxxxx> wrote: > In /etc/modprobe.d I have a file containing: > options cfg80211 ieee80211_regdom=EU > > During boot this results in: > <snip> > cfg80211: Using static regulatory domain info > cfg80211: Regulatory domain: EU > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) > (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) > (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) > cfg80211: Calling CRDA for country: EU > </snip> > > But with 2.6.31-rc2 I then get (the lines marked with "!" are not there > with .30): > <snip> > ath5k 0000:02:00.0: enabling device (0000 -> 0002) > ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > ath5k 0000:02:00.0: registered as 'phy0' > ! ath: EEPROM regdomain: 0x30 > ! ath: EEPROM indicates we should expect a direct regpair map > ! ath: Country alpha2 being used: AM > ! ath: Regpair used: 0x30 > phy0: Selected rate control algorithm 'minstrel' > ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) > ath5k phy0: RF2112B 2GHz radio found (0x46) > ! cfg80211: Calling CRDA for country: AM > </snip> > > So it looks *looks* > as if ath5k has started to override the regdomain I want. It looks as if, but you a few things you should be aware of. First, its not that anything is being ignored, user input is always welcomed to help compliance you are just using a wrong ISO-3166 alpha2. EU is not a country and as such is only left on older kernels with CONFIG_WIRELESS_OLD_REGULATORY enabled. So "EU" is deprecated for non CONFIG_WIRELESS_OLD_REGULATORY based kernels now. For further information please also read Documentation/feature-removal-schedule.txt. Please use a valid ISO-3166 alpha2 country code, I also advise to abandon the usage of the ieee80211_regdom module parameter which we do eventually intend on deprecating and if you know anyone using that please suggest the same. Eventually, as you will read from the feature-removal schedule, we intend on getting the Linux desktop to provide automatic hints of the user's location through things like GeoClue. Reason for removing the module parameter is its not the proper way to pass information to the kernel, we now have a netlink interface for this exact purpose. Until the desktop catches up we'll keep the ieee80211_regdom module parameter, but the proper new way to set your regulatory domain as a user is through iw [1] which does use netlink. Some distributions (like Fedora) automatically set your country based on the timezone information. So in the end you should not have to do this at all as a user. Another thing you should note is that if a driver has a regulatory domain hint then the driver regulatory domain is always trusted, users can *further* help compliance by selecting their country. What this means since Atheros drivers do have EEPROM reading for the regulatory domain that will be used first, thus enabling only channels allowed by the programmed EEPROM. A user input can then only disable channel, but never enable new ones. For devices with no regulatory at all the user can have more of a say as no driver regulatory hint is available but by default, in the absence of a driver regulatory hint, we world roam. [1] http://wireless.kernel.org/en/users/Documentation/iw Luis -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
