Actually it is required to be a mutual BASIC rate (not extended rates) -
not necessarily the "lowest possible" - David.
Valentin Manea wrote:
Hi,
I've tracked this problem down and to my shame the problem was on
the sending side, it seems that when sending broadcast/multicast
frames the sending side chooses the lowest bit rate possible. Is this
how it is supposed to behave?
Best Regards,
Valentin
On 07/01/2009 08:33 PM, Luis R. Rodriguez wrote:
On Tue, Jun 30, 2009 at 11:42 PM, Valentin
Manea<linux-wireless@xxxxxx> wrote:
On 06/30/2009 07:20 PM, Luis R. Rodriguez wrote:
On Tue, Jun 30, 2009 at 3:53 AM, Valentin Manea<linux-wireless@xxxxxx>
wrote:
Hi,
I've been working on a small project that basically sends
broadcast UDP
frames from an Wireless AP to multiple clients. While I can send UDP
frames
just fine from the AP to the client the only a few broadcast
frames reach
my
client. What is really puzzling is that on the client machine using
tcpdump
I can see all the broadcast frames arriving, my application sees
only a
small fraction of them.
Keep in mind when you use tcpdump it will modify the RX filters of the
device you use but if you say you see them on tcpdump and at the same
time do not see them on the application that seems fishy and non
driver related.
Luis
tcpdump doesn't affect the results at all, with or without it
running it's
the same.
Well it would if you had had other nodes sending data on the same BSS,
it would mean more RX'd frames that are passed up on your host. This
would just be specific to your BSS as you would be using promiscuous
mode and not a real monitor mode, so just wanted to point that out.
I have tried tracing the packets, I thought that maybe there is a
problem in
the 80211 stack and for some reason they would be dropped but as far
as I
can tell every packet is routed to the ip stack with the correct
protocol
and pkt_type.
OK then the issue is further down and not related to the driver or
wireless stack it seems.
One more strange thing, if I'm looking at netstat -s everything
seems to be
normal, InBcastPkts is fine, also the number of incomming UDP packets.
More confirmation things are peachy on the linux-wireless front and
that this is a userspace issue somewhere.
Any ideas where I could look? it just gets stranger and stranger.
If you see the frames do get to the host then definitely not on the
drivers / stack.
Luis
--
To unsubscribe from this list: send the line "unsubscribe
linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
