The regdbdump tool is really a host executable that is used during the build process. It could also be installed and used on the target, but two separate compilations are needed to achieve that goal. Currently, regdbdump is only built for the target, and thus cross-compilation of the tool is really feasible without this patch (or one like it). Signed-off-by: Jon Loeliger <jdl@xxxxxxxxxxxxxxxxxxx> --- This patch for the CRDA repository was offered on 12-June-2009 as an RFC, but received no comments at that time. Makefile | 281 +++++++++++++++++++++++++++++++++++++++++++++++++------------- 1 files changed, 223 insertions(+), 58 deletions(-) diff --git a/Makefile b/Makefile index b93b735..9f9ae01 100644 --- a/Makefile +++ b/Makefile @@ -1,3 +1,5 @@ +-include .config + # Modify as you see fit, note this is built into crda, # so if you change it here you will have to change crda.c REG_BIN?=/usr/lib/crda/regulatory.bin @@ -22,101 +24,259 @@ UDEV_RULE_DIR?=/lib/udev/rules.d/ # with make PUBKEY_DIR=/usr/lib/crda/pubkeys PUBKEY_DIR?=pubkeys -CFLAGS += -Wall -g -all: $(REG_BIN) crda intersect verify +MKDIR ?= mkdir -p +INSTALL ?= install + + +ifeq ($(V),1) + Q= + NQ=@true +else + Q=@ + NQ=@echo +endif + +# +# Determine what target and host libraries and executables +# need to be built as that will determine what libraries will +# need to be found on the host or in the target environment. +# -ifeq ($(USE_OPENSSL),1) -CFLAGS += -DUSE_OPENSSL `pkg-config --cflags openssl` -LDLIBS += `pkg-config --libs openssl` +BUILD := crda intersect regdbdump -reglib.o: keys-ssl.c +HOST_BUILD := $(patsubst %,host/%,$(BUILD)) +TARGET_BUILD := $(patsubst %,target/%,$(BUILD)) +ifeq ($(CROSS_COMPILE),) + # Host only + # Initially treat host and target the same using target. + TARGET_PKG_CONFIG_PATH := $(PKG_CONFIG_PATH) + TARGET_USE_OPENSSL := $(USE_OPENSSL) + BUILD_ALL := $(TARGET_BUILD) + INSTALL_EXECS := target/crda target/regdbdump else -CFLAGS += -DUSE_GCRYPT -LDLIBS += -lgcrypt + # Cross compile + BUILD_ALL := $(TARGET_BUILD) + ifeq ($(BUILD_FOR_HOST_TOO),1) + BUILD_ALL += $(HOST_BUILD) + endif + INSTALL_EXECS := target/crda target/regdbdump +endif + +INSTALL_MAN := crda.8.gz regdbdump.8.gz + -reglib.o: keys-gcrypt.c +TARGET_CFLAGS += -Wall -g + +ifeq ($(TARGET_USE_OPENSSL),1) + TARGET_CFLAGS_KEYS += -DUSE_OPENSSL \ + `PKG_CONFIG_PATH=$(TARGET_PKG_CONFIG_PATH) \ + pkg-config --cflags openssl` + TARGET_LDLIBS_KEYS += `PKG_CONFIG_PATH=$(TARGET_PKG_CONFIG_PATH) \ + pkg-config --libs openssl` + TARGET_KEYS_FILE := keys-ssl.c +else + TARGET_CFLAGS_KEYS += -DUSE_GCRYPT + TARGET_LDLIBS_KEYS += -lgcrypt + TARGET_KEYS_FILE := keys-gcrypt.c endif -MKDIR ?= mkdir -p -INSTALL ?= install -NL1FOUND := $(shell pkg-config --atleast-version=1 libnl-1 && echo Y) -NL2FOUND := $(shell pkg-config --atleast-version=2 libnl-2.0 && echo Y) +TARGET_NL1FOUND := $(shell PKG_CONFIG_PATH=$(TARGET_PKG_CONFIG_PATH) \ + pkg-config --atleast-version=1 libnl-1 && echo Y) +TARGET_NL2FOUND := $(shell PKG_CONFIG_PATH=$(TARGET_PKG_CONFIG_PATH) \ + pkg-config --atleast-version=2 libnl-2.0 && echo Y) -ifeq ($(NL1FOUND),Y) -NLLIBNAME = libnl-1 +ifeq ($(TARGET_NL1FOUND),Y) + TARGET_NLLIBNAME := libnl-1 endif -ifeq ($(NL2FOUND),Y) -CFLAGS += -DCONFIG_LIBNL20 -NLLIBS += -lnl-genl -NLLIBNAME = libnl-2.0 +ifeq ($(TARGET_NL2FOUND),Y) + TARGET_CFLAGS_NL += -DCONFIG_LIBNL20 + TARGET_LDLIBS_NL += -lnl-genl + TARGET_NLLIBNAME := libnl-2.0 endif -ifeq ($(NLLIBNAME),) -$(error Cannot find development files for any supported version of libnl) +ifneq ($(findstring clean,$(MAKECMDGOALS)),clean) +ifeq ($(TARGET_NLLIBNAME),) +$(error Cannot find development files for any supported version of target libnl) +endif endif -NLLIBS += `pkg-config --libs $(NLLIBNAME)` -CFLAGS += `pkg-config --cflags $(NLLIBNAME)` +TARGET_LDLIBS_NL += `PKG_CONFIG_PATH=$(TARGET_PKG_CONFIG_PATH) \ + pkg-config --libs $(TARGET_NLLIBNAME)` +TARGET_CFLAGS_NL += `PKG_CONFIG_PATH=$(TARGET_PKG_CONFIG_PATH) \ + pkg-config --cflags $(TARGET_NLLIBNAME)` + +TARGET_CFLAGS += $(TARGET_CFLAGS_NL) $(TARGET_CFLAGS_KEYS) +TARGET_LDLIBS += $(TARGET_LDLIBS_NL) $(TARGET_LDLIBS_KEYS) + + +# +# When not cross-compiling, treat target and host the same +# by transferring target-values to the HOST_* names and then +# only building the host targets. +# +# However when cross-compiling, build-up the real host-values +# in HOST_*, leaving the generic names to be for the target. +# +ifeq ($(CROSS_COMPILE),) + +# Not cross compiling, the host is the target. +HOST_CC := $(CC) +HOST_CFLAGS := $(TARGET_CFLAGS) +HOST_CPPFLAGS := $(TARGET_CPPFLAGS) +HOST_LDFLAGS := $(TARGET_LDFLAGS) +HOST_LDLIBS := $(TARGET_LDLIBS) +HOST_USE_OPENSSL := $(TARGET_USE_OPENSSL) +HOST_LDLIBS := $(TARGET_LDLIBS) +HOST_KEYS_FILE := $(TARGET_KEYS_FILE) +BUILD_ALL := $(subst target/,host/,$(BUILD_ALL)) +INSTALL_EXECS := $(subst target/,host/,$(INSTALL_EXECS)) -ifeq ($(V),1) -Q= -NQ=@true else -Q=@ -NQ=@echo + +# Cross compiling, so trump up HOST definitions now. + +HOST_CFLAGS += -Wall -g + +ifeq ($(HOST_USE_OPENSSL),1) + HOST_CFLAGS_KEYS += -DUSE_OPENSSL -DFOO \ + `PKG_CONFIG_PATH=$(HOST_PKG_CONFIG_PATH) \ + pkg-config --cflags openssl` + HOST_LDLIBS_KEYS += `PKG_CONFIG_PATH=$(HOST_PKG_CONFIG_PATH) \ + pkg-config --libs openssl` + HOST_KEYS_FILE := keys-ssl.c +else + HOST_CFLAGS_KEYS += -DUSE_GCRYPT + HOST_LDLIBS_KEYS += -lgcrypt + HOST_KEYS_FILE := keys-gcrypt.c endif -$(REG_BIN): - $(NQ) ' EXIST ' $(REG_BIN) - $(NQ) - $(NQ) ERROR: The file: $(REG_BIN) is missing. You need this in place in order - $(NQ) to build CRDA. You can get it from: - $(NQ) - $(NQ) $(REG_GIT) - $(NQ) - $(NQ) "Once cloned (no need to build) cp regulatory.bin to $(REG_BIN)" - $(NQ) - $(Q) exit 1 -keys-%.c: utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem) - $(NQ) ' GEN ' $@ - $(NQ) ' Trusted pubkeys:' $(wildcard $(PUBKEY_DIR)/*.pem) - $(Q)./utils/key2pub.py --$* $(wildcard $(PUBKEY_DIR)/*.pem) $@ +ifeq ($(findstring host/crda,$(BUILD_ALL)),host/crda) +HOST_NL1FOUND := $(shell PKG_CONFIG_PATH=$(HOST_PKG_CONFIG_PATH) \ + pkg-config --atleast-version=1 libnl-1 && echo Y) +HOST_NL2FOUND := $(shell PKG_CONFIG_PATH=$(HOST_PKG_CONFIG_PATH) \ + pkg-config --atleast-version=2 libnl-2.0 && echo Y) + +ifeq ($(HOST_NL1FOUND),Y) + HOST_NLLIBNAME := libnl-1 +endif + +ifeq ($(HOST_NL2FOUND),Y) + HOST_CFLAGS_NL += -DCONFIG_LIBNL20 + HOST_LDLIBS_NL += -lnl-genl + HOST_NLLIBNAME := libnl-2.0 +endif + +ifeq ($(HOST_NLLIBNAME),) +$(error Cannot find development files for any supported version of host libnl) +endif -%.o: %.c regdb.h +HOST_LDLIBS_NL += `PKG_CONFIG_PATH=$(HOST_PKG_CONFIG_PATH) \ + pkg-config --libs $(HOST_NLLIBNAME)` +HOST_CFLAGS_NL += `PKG_CONFIG_PATH=$(HOST_PKG_CONFIG_PATH) \ + pkg-config --cflags $(HOST_NLLIBNAME)` +endif + +endif + +HOST_CFLAGS += $(HOST_CFLAGS_KEYS) $(HOST_CFLAGS_NL) +HOST_LDLIBS += $(HOST_LDLIBS_KEYS) $(HOST_LDLIBS_NL) + + +CRDA_OBJS := reglib.o crda.o +REGDBDUMP_OBJS := reglib.o regdbdump.o print-regdom.o +INTERSECT_OBJS := reglib.o intersect.o print-regdom.o + + + +all: host target $(REG_BIN) $(BUILD_ALL) verify + +host target: + $(MKDIR) $@ + @echo Building $(BUILD_ALL) + + +target/crda: $(patsubst %,target/%,$(CRDA_OBJS)) + $(NQ) ' LD ' $@ + $(Q)$(CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $@ $^ $(TARGET_LDLIBS) $(NLLIBS) + +target/regdbdump: $(patsubst %,target/%,$(REGDBDUMP_OBJS)) + $(NQ) ' LD ' $@ + $(Q)$(CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $@ $^ $(TARGET_LDLIBS) + +target/intersect: $(patsubst %,target/%,$(INTERSECT_OBJS)) + $(NQ) ' LD ' $@ + $(Q)$(CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $@ $^ $(TARGET_LDLIBS) + +target/reglib.o: $(TARGET_KEYS_FILE) + +target/%.o: %.c regdb.h $(NQ) ' CC ' $@ - $(Q)$(CC) -c $(CPPFLAGS) $(CFLAGS) -o $@ $< + $(Q)$(CC) -c $(TARGET_CPPFLAGS) $(TARGET_CFLAGS) -o $@ $< + -crda: reglib.o crda.o +host/crda: $(patsubst %,host/%,$(CRDA_OBJS)) $(NQ) ' LD ' $@ - $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) $(NLLIBS) + $(Q)$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(HOST_LDLIBS) $(HOST_LIBS_NL) -regdbdump: reglib.o regdbdump.o print-regdom.o +host/regdbdump: $(patsubst %,host/%,$(REGDBDUMP_OBJS)) $(NQ) ' LD ' $@ - $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) + $(Q)$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(HOST_LDLIBS) -intersect: reglib.o intersect.o print-regdom.o +host/intersect: $(patsubst %,host/%,$(INTERSECT_OBJS)) $(NQ) ' LD ' $@ - $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) + $(Q)$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(HOST_LDLIBS) + +host/reglib.o: $(HOST_KEYS_FILE) + +host/%.o: %.c regdb.h + $(NQ) ' HOST_CC ' $@ + $(Q)$(HOST_CC) -c $(HOST_CPPFLAGS) $(HOST_CFLAGS) -o $@ $< + -verify: $(REG_BIN) regdbdump +keys-%.c: utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem) + $(NQ) ' GEN ' $@ + $(NQ) ' Trusted pubkeys:' $(wildcard $(PUBKEY_DIR)/*.pem) + $(Q)./utils/key2pub.py --$* $(wildcard $(PUBKEY_DIR)/*.pem) $@ + +verify: $(REG_BIN) host/regdbdump $(NQ) ' CHK $(REG_BIN)' - $(Q)./regdbdump $(REG_BIN) >/dev/null + $(Q)./host/regdbdump $(REG_BIN) >/dev/null + + +$(REG_BIN): + $(NQ) ' EXIST ' $(REG_BIN) + $(NQ) + $(NQ) ERROR: The file: $(REG_BIN) is missing. You need this in place in order + $(NQ) to build CRDA. You can get it from: + $(NQ) + $(NQ) $(REG_GIT) + $(NQ) + $(NQ) "Once cloned (no need to build) cp regulatory.bin to $(REG_BIN)" + $(NQ) + $(Q) exit 1 %.gz: % @$(NQ) ' GZIP' $< $(Q)gzip < $< > $@ -install: crda crda.8.gz regdbdump.8.gz - $(NQ) ' INSTALL crda' + +install: install_execs install_udev install_man + +install_execs: $(INSTALL_EXECS) $(Q)$(MKDIR) $(DESTDIR)/$(SBINDIR) - $(Q)$(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) crda - $(NQ) ' INSTALL regdbdump' - $(Q)$(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) regdbdump + $(Q)for exec in $(INSTALL_EXECS) ; do \ + echo " INSTALL $$exec" ; \ + $(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) $$exec ; \ + done + +.PHONY: install_udev +install_udev: +ifndef NO_INSTALL_UDEV $(NQ) ' INSTALL $(UDEV_LEVEL)regulatory.rules' $(Q)$(MKDIR) $(DESTDIR)/$(UDEV_RULE_DIR)/ @# This removes the old rule you may have, we were not @@ -127,6 +287,9 @@ install: crda crda.8.gz regdbdump.8.gz $(Q)$(INSTALL) -m 644 -t \ $(DESTDIR)/$(UDEV_RULE_DIR)/ \ udev/$(UDEV_LEVEL)regulatory.rules +endif + +install_man: $(INSTALL_MAN) $(NQ) ' INSTALL crda.8.gz' $(Q)$(MKDIR) $(DESTDIR)$(MANDIR)/man8/ $(Q)$(INSTALL) -m 644 -t $(DESTDIR)/$(MANDIR)/man8/ crda.8.gz @@ -134,5 +297,7 @@ install: crda crda.8.gz regdbdump.8.gz $(Q)$(INSTALL) -m 644 -t $(DESTDIR)/$(MANDIR)/man8/ regdbdump.8.gz clean: + $(NQ) ' CLEAN' $(Q)rm -f crda regdbdump intersect *.o *~ *.pyc keys-*.c *.gz \ udev/$(UDEV_LEVEL)regulatory.rules udev/regulatory.rules.parsed + $(Q)rm -rf host/ target/ -- 1.6.3.GIT -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
