From: Christian Lamparter <chunkeey@xxxxxx>
Copy the eeprom code from p54common.h into a new file eeprom.h
Signed-off-by: Christian Lamparter <chunkeey@xxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
diff --git a/drivers/net/wireless/p54/eeprom.h b/drivers/net/wireless/p54/eeprom.h
new file mode 100644
index 0000000..9051aef
--- /dev/null
+++ b/drivers/net/wireless/p54/eeprom.h
@@ -0,0 +1,226 @@
+/*
+ * eeprom specific definitions for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@xxxxxxxxxxxx>
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@xxxxxx>
+ *
+ * Based on:
+ * - the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@xxxxxxxxx>, et al.
+ *
+ * - LMAC API interface header file for STLC4560 (lmac_longbow.h)
+ * Copyright (C) 2007 Conexant Systems, Inc.
+ *
+ * - islmvc driver
+ * Copyright (C) 2001 Intersil Americas Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef EEPROM_H
+#define EEPROM_H
+
+/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
+
+struct pda_entry {
+ __le16 len; /* includes both code and data */
+ __le16 code;
+ u8 data[0];
+} __packed;
+
+struct eeprom_pda_wrap {
+ __le32 magic;
+ __le16 pad;
+ __le16 len;
+ __le32 arm_opcode;
+ u8 data[0];
+} __packed;
+
+struct p54_iq_autocal_entry {
+ __le16 iq_param[4];
+} __packed;
+
+struct pda_iq_autocal_entry {
+ __le16 freq;
+ struct p54_iq_autocal_entry params;
+} __packed;
+
+struct pda_channel_output_limit {
+ __le16 freq;
+ u8 val_bpsk;
+ u8 val_qpsk;
+ u8 val_16qam;
+ u8 val_64qam;
+ u8 rate_set_mask;
+ u8 rate_set_size;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev0 {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 pcv;
+} __packed;
+
+struct pda_pa_curve_data_sample_rev1 {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 data_barker;
+ u8 data_bpsk;
+ u8 data_qpsk;
+ u8 data_16qam;
+ u8 data_64qam;
+} __packed;
+
+struct pda_pa_curve_data {
+ u8 cal_method_rev;
+ u8 channels;
+ u8 points_per_channel;
+ u8 padding;
+ u8 data[0];
+} __packed;
+
+struct pda_rssi_cal_entry {
+ __le16 mul;
+ __le16 add;
+} __packed;
+
+struct pda_country {
+ u8 regdomain;
+ u8 alpha2[2];
+ u8 flags;
+} __packed;
+
+struct pda_antenna_gain {
+ struct {
+ u8 gain_5GHz; /* 0.25 dBi units */
+ u8 gain_2GHz; /* 0.25 dBi units */
+ } __packed antenna[0];
+} __packed;
+
+struct pda_custom_wrapper {
+ __le16 entries;
+ __le16 entry_size;
+ __le16 offset;
+ __le16 len;
+ u8 data[0];
+} __packed;
+
+/*
+ * this defines the PDR codes used to build PDAs as defined in document
+ * number 553155. The current implementation mirrors version 1.1 of the
+ * document and lists only PDRs supported by the ARM platform.
+ */
+
+/* common and choice range (0x0000 - 0x0fff) */
+#define PDR_END 0x0000
+#define PDR_MANUFACTURING_PART_NUMBER 0x0001
+#define PDR_PDA_VERSION 0x0002
+#define PDR_NIC_SERIAL_NUMBER 0x0003
+#define PDR_NIC_RAM_SIZE 0x0005
+#define PDR_RFMODEM_SUP_RANGE 0x0006
+#define PDR_PRISM_MAC_SUP_RANGE 0x0007
+#define PDR_NIC_ID 0x0008
+
+#define PDR_MAC_ADDRESS 0x0101
+#define PDR_REGULATORY_DOMAIN_LIST 0x0103 /* obsolete */
+#define PDR_ALLOWED_CHAN_SET 0x0104
+#define PDR_DEFAULT_CHAN 0x0105
+#define PDR_TEMPERATURE_TYPE 0x0107
+
+#define PDR_IFR_SETTING 0x0200
+#define PDR_RFR_SETTING 0x0201
+#define PDR_3861_BASELINE_REG_SETTINGS 0x0202
+#define PDR_3861_SHADOW_REG_SETTINGS 0x0203
+#define PDR_3861_IFRF_REG_SETTINGS 0x0204
+
+#define PDR_3861_CHAN_CALIB_SET_POINTS 0x0300
+#define PDR_3861_CHAN_CALIB_INTEGRATOR 0x0301
+
+#define PDR_3842_PRISM_II_NIC_CONFIG 0x0400
+#define PDR_PRISM_USB_ID 0x0401
+#define PDR_PRISM_PCI_ID 0x0402
+#define PDR_PRISM_PCI_IF_CONFIG 0x0403
+#define PDR_PRISM_PCI_PM_CONFIG 0x0404
+
+#define PDR_3861_MF_TEST_CHAN_SET_POINTS 0x0900
+#define PDR_3861_MF_TEST_CHAN_INTEGRATORS 0x0901
+
+/* ARM range (0x1000 - 0x1fff) */
+#define PDR_COUNTRY_INFORMATION 0x1000 /* obsolete */
+#define PDR_INTERFACE_LIST 0x1001
+#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002
+#define PDR_OEM_NAME 0x1003
+#define PDR_PRODUCT_NAME 0x1004
+#define PDR_UTF8_OEM_NAME 0x1005
+#define PDR_UTF8_PRODUCT_NAME 0x1006
+#define PDR_COUNTRY_LIST 0x1007
+#define PDR_DEFAULT_COUNTRY 0x1008
+
+#define PDR_ANTENNA_GAIN 0x1100
+
+#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901
+#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903
+#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904
+#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905
+#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906
+#define PDR_REGULATORY_POWER_LIMITS 0x1907
+#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908
+#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909
+#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a
+
+/* reserved range (0x2000 - 0x7fff) */
+
+/* customer range (0x8000 - 0xffff) */
+#define PDR_BASEBAND_REGISTERS 0x8000
+#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001
+
+/* used by our modificated eeprom image */
+#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF
+#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D
+
+/* Interface Definitions */
+#define PDR_INTERFACE_ROLE_SERVER 0x0000
+#define PDR_INTERFACE_ROLE_CLIENT 0x0001
+
+/* PDR definitions for default country & country list */
+#define PDR_COUNTRY_CERT_CODE 0x80
+#define PDR_COUNTRY_CERT_CODE_REAL 0x00
+#define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80
+#define PDR_COUNTRY_CERT_BAND 0x40
+#define PDR_COUNTRY_CERT_BAND_2GHZ 0x00
+#define PDR_COUNTRY_CERT_BAND_5GHZ 0x40
+#define PDR_COUNTRY_CERT_IODOOR 0x30
+#define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00
+#define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20
+#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30
+#define PDR_COUNTRY_CERT_INDEX 0x0f
+
+/* Specific LMAC FW/HW variant definitions */
+#define PDR_SYNTH_FRONTEND_MASK 0x0007
+#define PDR_SYNTH_FRONTEND_DUETTE3 0x0001
+#define PDR_SYNTH_FRONTEND_DUETTE2 0x0002
+#define PDR_SYNTH_FRONTEND_FRISBEE 0x0003
+#define PDR_SYNTH_FRONTEND_XBOW 0x0004
+#define PDR_SYNTH_FRONTEND_LONGBOW 0x0005
+#define PDR_SYNTH_IQ_CAL_MASK 0x0018
+#define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000
+#define PDR_SYNTH_IQ_CAL_DISABLED 0x0008
+#define PDR_SYNTH_IQ_CAL_ZIF 0x0010
+#define PDR_SYNTH_FAA_SWITCH_MASK 0x0020
+#define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020
+#define PDR_SYNTH_24_GHZ_MASK 0x0040
+#define PDR_SYNTH_24_GHZ_DISABLED 0x0040
+#define PDR_SYNTH_5_GHZ_MASK 0x0080
+#define PDR_SYNTH_5_GHZ_DISABLED 0x0080
+#define PDR_SYNTH_RX_DIV_MASK 0x0100
+#define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100
+#define PDR_SYNTH_TX_DIV_MASK 0x0200
+#define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200
+#define PDR_SYNTH_ASM_MASK 0x0400
+#define PDR_SYNTH_ASM_XSWON 0x0400
+
+#endif /* EEPROM_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
