On Wed, 2009-06-17 at 19:15 -0700, Andrey Yurovsky wrote: > The SDIO driver sets the surpriseremoved flag before calling > lbs_remove_card. With IEEE PS enabled, lbs_remove_card must issue a > command to exit IEEE PS mode, however with that flag set the command > path is blocked and the card is never taken out of IEEE PS mode. This > step is required to ensure that the driver can be reloaded. This patch > moves the setting of surpriseremoved after lbs_remove_card is called. > > Tested with V9 firmware by ensuring that IEEE PS is disabled when the > driver is removed. Reloading the driver is not fully tested due to a > separate issue with module reload in the SDIO driver, however this > patch at least leaves the card in a better state when we bring the > driver down. > > Signed-off-by: Andrey Yurovsky <andrey@xxxxxxxxxxx> Acked-by: Dan Williams <dcbw@xxxxxxxxxx> > --- > drivers/net/wireless/libertas/if_sdio.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c > index 8cdb88c..d48ed62 100644 > --- a/drivers/net/wireless/libertas/if_sdio.c > +++ b/drivers/net/wireless/libertas/if_sdio.c > @@ -1096,11 +1096,11 @@ static void if_sdio_remove(struct sdio_func *func) > lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n"); > } > > - card->priv->surpriseremoved = 1; > > lbs_deb_sdio("call remove card\n"); > lbs_stop_card(card->priv); > lbs_remove_card(card->priv); > + card->priv->surpriseremoved = 1; > > flush_workqueue(card->workqueue); > destroy_workqueue(card->workqueue); -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html