Convert set/get txpower to cfg80211 and add stop netdev handler to turn off
radio for rfkill.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@xxxxxxxx>
---
drivers/net/wireless/rndis_wlan.c | 148 +++++++++++++++++++------------------
1 files changed, 75 insertions(+), 73 deletions(-)
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 323dd29..0c58c0e 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -139,9 +139,15 @@ MODULE_PARM_DESC(workaround_interval,
/* Assume that Broadcom 4320 (only chipset at time of writing known to be
* based on wireless rndis) has default txpower of 13dBm.
* This value is from Linksys WUSB54GSC User Guide, Appendix F: Specifications.
- * 13dBm == 19.9mW
+ * 100% : 20 mW ~ 13dBm
+ * 75% : 15 mW ~ 12dBm
+ * 50% : 10 mW ~ 10dBm
+ * 25% : 5 mW ~ 7dBm
*/
-#define BCM4320_DEFAULT_TXPOWER 20
+#define BCM4320_DEFAULT_TXPOWER_DBM_100 13
+#define BCM4320_DEFAULT_TXPOWER_DBM_75 12
+#define BCM4320_DEFAULT_TXPOWER_DBM_50 10
+#define BCM4320_DEFAULT_TXPOWER_DBM_25 7
/* codes for "status" field of completion messages */
@@ -429,15 +435,20 @@ static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed);
+static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
+ int dbm);
+static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm);
+
static struct cfg80211_ops rndis_config_ops = {
.change_virtual_intf = rndis_change_virtual_intf,
.scan = rndis_scan,
.set_wiphy_params = rndis_set_wiphy_params,
+ .set_tx_power = rndis_set_tx_power,
+ .get_tx_power = rndis_get_tx_power,
};
static void *rndis_wiphy_privid = &rndis_wiphy_privid;
-static const int bcm4320_power_output[4] = { 25, 50, 75, 100 };
static const unsigned char zero_bssid[ETH_ALEN] = {0,};
static const unsigned char ffff_bssid[ETH_ALEN] = { 0xff, 0xff, 0xff,
@@ -450,10 +461,19 @@ static struct rndis_wlan_private *get_rndis_wlan_priv(struct usbnet *dev)
}
-static u32 get_bcm4320_power(struct rndis_wlan_private *priv)
+static u32 get_bcm4320_power_dbm(struct rndis_wlan_private *priv)
{
- return BCM4320_DEFAULT_TXPOWER *
- bcm4320_power_output[priv->param_power_output] / 100;
+ switch (priv->param_power_output) {
+ default:
+ case 3:
+ return BCM4320_DEFAULT_TXPOWER_DBM_100;
+ case 2:
+ return BCM4320_DEFAULT_TXPOWER_DBM_75;
+ case 1:
+ return BCM4320_DEFAULT_TXPOWER_DBM_50;
+ case 0:
+ return BCM4320_DEFAULT_TXPOWER_DBM_25;
+ }
}
@@ -1306,6 +1326,42 @@ static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed)
}
+static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
+ int dbm)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ devdbg(usbdev, "rndis_set_tx_power type:0x%x dbm:%i", type, dbm);
+
+ /* Device doesn't support changing txpower after initialization, only
+ * turn off/on radio. Support 'auto' mode and setting same dBm that is
+ * currently used.
+ */
+ if (type == TX_POWER_AUTOMATIC || dbm == get_bcm4320_power_dbm(priv)) {
+ if (!priv->radio_on)
+ disassociate(usbdev, 1); /* turn on radio */
+
+ return 0;
+ }
+
+ return -ENOTSUPP;
+}
+
+
+static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm)
+{
+ struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+ struct usbnet *usbdev = priv->usbdev;
+
+ *dbm = get_bcm4320_power_dbm(priv);
+
+ devdbg(usbdev, "rndis_get_tx_power dbm:%i", *dbm);
+
+ return 0;
+}
+
+
#define SCAN_DELAY_JIFFIES (HZ)
static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_scan_request *request)
@@ -1869,71 +1925,6 @@ static int rndis_iw_get_freq(struct net_device *dev,
}
-static int rndis_iw_get_txpower(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- __le32 tx_power;
-
- if (priv->radio_on) {
- /* fake since changing tx_power (by userlevel) not supported */
- tx_power = cpu_to_le32(get_bcm4320_power(priv));
-
- wrqu->txpower.flags = IW_TXPOW_MWATT;
- wrqu->txpower.value = le32_to_cpu(tx_power);
- wrqu->txpower.disabled = 0;
- } else {
- wrqu->txpower.flags = IW_TXPOW_MWATT;
- wrqu->txpower.value = 0;
- wrqu->txpower.disabled = 1;
- }
-
- devdbg(usbdev, "SIOCGIWTXPOW: %d", wrqu->txpower.value);
-
- return 0;
-}
-
-
-static int rndis_iw_set_txpower(struct net_device *dev,
- struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
-{
- struct usbnet *usbdev = netdev_priv(dev);
- struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
- __le32 tx_power = 0;
-
- if (!wrqu->txpower.disabled) {
- if (wrqu->txpower.flags == IW_TXPOW_MWATT)
- tx_power = cpu_to_le32(wrqu->txpower.value);
- else { /* wrqu->txpower.flags == IW_TXPOW_DBM */
- if (wrqu->txpower.value > 20)
- tx_power = cpu_to_le32(128);
- else if (wrqu->txpower.value < -43)
- tx_power = cpu_to_le32(127);
- else {
- signed char tmp;
- tmp = wrqu->txpower.value;
- tmp = -12 - tmp;
- tmp <<= 2;
- tx_power = cpu_to_le32((unsigned char)tmp);
- }
- }
- }
-
- devdbg(usbdev, "SIOCSIWTXPOW: %d", le32_to_cpu(tx_power));
-
- if (le32_to_cpu(tx_power) != 0) {
- /* txpower unsupported, just turn radio on */
- if (!priv->radio_on)
- return disassociate(usbdev, 1);
- return 0; /* all ready on */
- }
-
- /* tx_power == 0, turn off radio */
- return disassociate(usbdev, 0);
-}
-
-
static int rndis_iw_get_rate(struct net_device *dev,
struct iw_request_info *info, union iwreq_data *wrqu, char *extra)
{
@@ -2013,8 +2004,8 @@ static const iw_handler rndis_iw_handler[] =
IW_IOCTL(SIOCGIWRTS) = (iw_handler) cfg80211_wext_giwrts,
IW_IOCTL(SIOCSIWFRAG) = (iw_handler) cfg80211_wext_siwfrag,
IW_IOCTL(SIOCGIWFRAG) = (iw_handler) cfg80211_wext_giwfrag,
- IW_IOCTL(SIOCSIWTXPOW) = rndis_iw_set_txpower,
- IW_IOCTL(SIOCGIWTXPOW) = rndis_iw_get_txpower,
+ IW_IOCTL(SIOCSIWTXPOW) = (iw_handler) cfg80211_wext_siwtxpower,
+ IW_IOCTL(SIOCGIWTXPOW) = (iw_handler) cfg80211_wext_giwtxpower,
IW_IOCTL(SIOCSIWENCODE) = rndis_iw_set_encode,
IW_IOCTL(SIOCSIWENCODEEXT) = rndis_iw_set_encode_ext,
IW_IOCTL(SIOCSIWAUTH) = rndis_iw_set_auth,
@@ -2513,10 +2504,18 @@ static void rndis_wlan_unbind(struct usbnet *usbdev, struct usb_interface *intf)
static int rndis_wlan_reset(struct usbnet *usbdev)
{
+ devdbg(usbdev, "rndis_wlan_reset");
return deauthenticate(usbdev);
}
+static int rndis_wlan_stop(struct usbnet *usbdev)
+{
+ devdbg(usbdev, "rndis_wlan_stop");
+ return disassociate(usbdev, 0);
+}
+
+
static const struct driver_info bcm4320b_info = {
.description = "Wireless RNDIS device, BCM4320b based",
.flags = FLAG_WLAN | FLAG_FRAMING_RN | FLAG_NO_SETINT,
@@ -2526,6 +2525,7 @@ static const struct driver_info bcm4320b_info = {
.rx_fixup = rndis_rx_fixup,
.tx_fixup = rndis_tx_fixup,
.reset = rndis_wlan_reset,
+ .stop = rndis_wlan_stop,
.early_init = bcm4320b_early_init,
.link_change = rndis_wlan_link_change,
};
@@ -2539,6 +2539,7 @@ static const struct driver_info bcm4320a_info = {
.rx_fixup = rndis_rx_fixup,
.tx_fixup = rndis_tx_fixup,
.reset = rndis_wlan_reset,
+ .stop = rndis_wlan_stop,
.early_init = bcm4320a_early_init,
.link_change = rndis_wlan_link_change,
};
@@ -2552,6 +2553,7 @@ static const struct driver_info rndis_wlan_info = {
.rx_fixup = rndis_rx_fixup,
.tx_fixup = rndis_tx_fixup,
.reset = rndis_wlan_reset,
+ .stop = rndis_wlan_stop,
.early_init = bcm4320a_early_init,
.link_change = rndis_wlan_link_change,
};
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
