Signed-off-by: Vasanthakumar Thiagarajan <vasanth@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/main.c | 21 ++++++++++++++++-----
1 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index afac281..5fd17a4 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -231,6 +231,19 @@ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
}
}
+static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
+ struct ieee80211_hw *hw)
+{
+ struct ieee80211_channel *curchan = hw->conf.channel;
+ struct ath9k_channel *channel;
+ u8 chan_idx;
+
+ chan_idx = curchan->hw_value;
+ channel = &sc->sc_ah->channels[chan_idx];
+ ath9k_update_ichannel(sc, hw, channel);
+ return channel;
+}
+
/*
* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
@@ -1925,7 +1938,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
struct ath_softc *sc = aphy->sc;
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *init_channel;
- int r, pos;
+ int r;
DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
"initial channel: %d MHz\n", curchan->center_freq);
@@ -1955,11 +1968,9 @@ static int ath9k_start(struct ieee80211_hw *hw)
/* setup initial channel */
- pos = curchan->hw_value;
+ sc->chan_idx = curchan->hw_value;
- sc->chan_idx = pos;
- init_channel = &sc->sc_ah->channels[pos];
- ath9k_update_ichannel(sc, hw, init_channel);
+ init_channel = ath_get_curchannel(sc, hw);
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(sc->sc_ah, 0);
--
1.5.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
