On Sun, Jun 7, 2009 at 2:29 PM, Wojciech Zabolotny CERN<wojciech.zabolotny@xxxxxxx> wrote: > Hi, > > I've managed to run my NIC with the older firmware: > http://daemonizer.de/prism54/prism54-fw/fw-usb/2.13.1.0.lm86.arm > > Now I get the following output in dmesg: > > cfg80211: Using static regulatory domain info > cfg80211: Regulatory domain: US > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) > (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) > (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) > cfg80211: Calling CRDA for country: US > usb 1-4: firmware: requesting isl3886usb > phy0: p54 detected a LM86 firmware > p54: rx_mtu reduced from 3240 to 2392 > phy0: FW rev 2.13.1.0 - Softmac protocol 5.5 > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > phy0: hwaddr 00:30:43:11:33:39, MAC:isl3886 RF:Frisbee > wmaster0 (p54usb): not using net_device_ops yet > phy0: Selected rate control algorithm 'minstrel' > wlan0 (p54usb): not using net_device_ops yet > usbcore: registered new interface driver p54usb > > > Then everything works correctly. > So it seems, that the new firmware is just incompatible with this card :-(. What about an LM87 firmware? It should be supported now... > -- > BR, WZab > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
