On Thu, 2009-06-04 at 10:59 -0500, Larry Finger wrote: > Johannes Berg wrote: > > > > Could you try, without the patch in question, what happens in terms of > > uevents > > * have everything on > > * press rfkill button (expect -> hw_blocked transition) > > * put interface down > > * press rfkill button (expect -> unblocked transition) > > * put interface up > > I'm running v2.6.30-rc8-25743-g3b2029b from wireless-testing. But this is without the patch?! If yes that would confuse me. johannes > This is with interface UP and switch off: > > larrylap:/etc/sysconfig/network # cat /sys/class/rfkill/rfkill0/uevent > PHYSDEVPATH=/devices/pci0000:00/0000:00:0d.0/0000:04:00.0/ssb0:0 > PHYSDEVBUS=ssb > PHYSDEVDRIVER=b43 > RFKILL_NAME=phy0 > RFKILL_TYPE=wlan > RFKILL_STATE=2 > > > larrylap:/etc/sysconfig/network # ifdown eth1 > eth1 name: BCM4312 802.11a/b/g > larrylap:/etc/sysconfig/network # cat /sys/class/rfkill/rfkill0/uevent > PHYSDEVPATH=/devices/pci0000:00/0000:00:0d.0/0000:04:00.0/ssb0:0 > PHYSDEVBUS=ssb > PHYSDEVDRIVER=b43 > RFKILL_NAME=phy0 > RFKILL_TYPE=wlan > RFKILL_STATE=2 > > At this point, radio kill switch turned on: > > larrylap:/etc/sysconfig/network # ifup eth1 > eth1 name: BCM4312 802.11a/b/g > eth1 warning: WPA configured but may be unsupported > eth1 warning: by this device > eth1 starting wpa_supplicant > SIOCSIFFLAGS: Unknown error 132 > Could not set interface 'eth1' UP > RTNETLINK answers: Unknown error 132 > Starting DHCP4 client on eth1. . . . > eth1 DHCP4 client NOT running > RTNETLINK answers: Unknown error 132 > Cannot enable interface eth1. > interface eth1 is not up > > larrylap:/etc/sysconfig/network # cat /sys/class/rfkill/rfkill0/uevent > PHYSDEVPATH=/devices/pci0000:00/0000:00:0d.0/0000:04:00.0/ssb0:0 > PHYSDEVBUS=ssb > PHYSDEVDRIVER=b43 > RFKILL_NAME=phy0 > RFKILL_TYPE=wlan > RFKILL_STATE=2 > > The ERFKILL (132) prevents it from coming up. Again, the switch was on > at this point. > > I could not restore service until rmmod/insmod of b43. > > Larry >
Attachment:
signature.asc
Description: This is a digitally signed message part
